[PATCH v2] Enhanced support for MPC8xx/8xxx watchdog
Christophe Leroy
christophe.leroy at c-s.fr
Thu Feb 28 19:52:22 EST 2013
This patch modifies the behaviour of the MPC8xx/8xxx watchdog. On the MPC8xx,
at 133Mhz, the maximum timeout of the watchdog timer is 1s, which means it must
be pinged twice a second. This is not in line with the Linux watchdog concept
which is based on a default watchdog timeout around 60s.
This patch introduces an intermediate layer between the CPU and the userspace.
The kernel pings the watchdog at the required frequency at the condition that
userspace tools refresh it regularly.
Existing parameter 'timeout' is renamed 'hw_time'.
The new parameter 'timeout' allows to set up the userspace timeout.
The driver also implements the WDIOC_SETTIMEOUT ioctl.
Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
diff -ur linux-3.7.9/drivers/watchdog/mpc8xxx_wdt.c linux/drivers/watchdog/mpc8xxx_wdt.c
--- linux-3.7.9/drivers/watchdog/mpc8xxx_wdt.c 2013-02-17 19:53:32.000000000 +0100
+++ linux/drivers/watchdog/mpc8xxx_wdt.c 2013-02-27 16:00:07.000000000 +0100
@@ -52,10 +52,17 @@
static struct mpc8xxx_wdt __iomem *wd_base;
static int mpc8xxx_wdt_init_late(void);
-static u16 timeout = 0xffff;
-module_param(timeout, ushort, 0);
+#define WD_TIMO 10 /* Default timeout = 10 seconds */
+
+static uint timeout = WD_TIMO;
+module_param(timeout, uint, 0);
MODULE_PARM_DESC(timeout,
- "Watchdog timeout in ticks. (0<timeout<65536, default=65535)");
+ "Watchdog SW timeout in seconds. (0 < timeout < 65536s, default = "
+ __MODULE_STRING(WD_TIMO) "s)");
+static u16 hw_timo = 0xffff;
+module_param(hw_timo, ushort, 0);
+MODULE_PARM_DESC(hw_timo,
+ "Watchdog HW timeout in ticks. (0 < hw_timo < 65536, default = 65535)");
static bool reset = 1;
module_param(reset, bool, 0);
@@ -72,10 +79,12 @@
* to 0
*/
static int prescale = 1;
-static unsigned int timeout_sec;
+static unsigned int hw_timo_sec;
+static int wdt_auto = 1;
static unsigned long wdt_is_open;
static DEFINE_SPINLOCK(wdt_spinlock);
+static unsigned long wdt_last_ping;
static void mpc8xxx_wdt_keepalive(void)
{
@@ -91,9 +100,20 @@
static void mpc8xxx_wdt_timer_ping(unsigned long arg)
{
- mpc8xxx_wdt_keepalive();
- /* We're pinging it twice faster than needed, just to be sure. */
- mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2);
+ if (wdt_auto)
+ wdt_last_ping = jiffies;
+
+ if (jiffies - wdt_last_ping <= timeout * HZ) {
+ mpc8xxx_wdt_keepalive();
+ /* We're pinging it twice faster than needed, to be sure. */
+ mod_timer(&wdt_timer, jiffies + HZ * hw_timo_sec / 2);
+ }
+}
+
+static void mpc8xxx_wdt_sw_keepalive(void)
+{
+ wdt_last_ping = jiffies;
+ mpc8xxx_wdt_timer_ping(0);
}
static void mpc8xxx_wdt_pr_warn(const char *msg)
@@ -106,7 +126,7 @@
size_t count, loff_t *ppos)
{
if (count)
- mpc8xxx_wdt_keepalive();
+ mpc8xxx_wdt_sw_keepalive();
return count;
}
@@ -126,11 +146,11 @@
if (reset)
tmp |= SWCRR_SWRI;
- tmp |= timeout << 16;
+ tmp |= hw_timo << 16;
out_be32(&wd_base->swcrr, tmp);
- del_timer_sync(&wdt_timer);
+ wdt_auto = 0;
return nonseekable_open(inode, file);
}
@@ -138,7 +158,8 @@
static int mpc8xxx_wdt_release(struct inode *inode, struct file *file)
{
if (!nowayout)
- mpc8xxx_wdt_timer_ping(0);
+ wdt_auto = 1;
+
else
mpc8xxx_wdt_pr_warn("watchdog closed");
clear_bit(0, &wdt_is_open);
@@ -163,10 +184,12 @@
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_KEEPALIVE:
- mpc8xxx_wdt_keepalive();
+ mpc8xxx_wdt_sw_keepalive();
return 0;
case WDIOC_GETTIMEOUT:
- return put_user(timeout_sec, p);
+ return put_user(timeout, p);
+ case WDIOC_SETTIMEOUT:
+ return get_user(timeout, p);
default:
return -ENOTTY;
}
@@ -215,12 +238,14 @@
ret = -ENOSYS;
goto err_unmap;
}
+ if (enabled)
+ hw_timo = in_be32(&wd_base->swcrr) >> 16;
/* Calculate the timeout in seconds */
if (prescale)
- timeout_sec = (timeout * wdt_type->prescaler) / freq;
+ hw_timo_sec = (hw_timo * wdt_type->prescaler) / freq;
else
- timeout_sec = timeout / freq;
+ hw_timo_sec = hw_timo / freq;
#ifdef MODULE
ret = mpc8xxx_wdt_init_late();
@@ -228,8 +253,8 @@
goto err_unmap;
#endif
- pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d (%d seconds)\n",
- reset ? "reset" : "interrupt", timeout, timeout_sec);
+ pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout = %d (%d seconds)\n",
+ reset ? "reset" : "interrupt", hw_timo, hw_timo_sec);
/*
* If the watchdog was previously enabled or we're running on
@@ -273,6 +298,7 @@
.compatible = "fsl,mpc823-wdt",
.data = &(struct mpc8xxx_wdt_type) {
.prescaler = 0x800,
+ .hw_enabled = true,
},
},
{},
More information about the Linuxppc-dev
mailing list