[PATCH 2/6] powerpc/fsl_pci: Store the platform device information corresponding to the pci controller.
Varun Sethi
Varun.Sethi at freescale.com
Mon Feb 18 23:52:15 EST 2013
The pci controller structure has a provision to store the device strcuture
pointer of the corresponding platform device. Currently this information is
not stored during fsl pci controller initialization. This information is
required while dealing with iommu groups for pci devices connected to the fsl
pci controller. For the case where the pci devices can't be paritioned, they
would fall under the same device group as the pci controller.
This patch stores the platform device information in the pci controller
structure during initialization.
Signed-off-by: Varun Sethi <Varun.Sethi at freescale.com>
---
arch/powerpc/sysdev/fsl_pci.c | 9 +++++++--
arch/powerpc/sysdev/fsl_pci.h | 2 +-
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 92a5915..b393ae7 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -421,13 +421,16 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus)
}
}
-int __init fsl_add_bridge(struct device_node *dev, int is_primary)
+int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
{
int len;
struct pci_controller *hose;
struct resource rsrc;
const int *bus_range;
u8 hdr_type, progif;
+ struct device_node *dev;
+
+ dev = pdev->dev.of_node;
if (!of_device_is_available(dev)) {
pr_warning("%s: disabled\n", dev->full_name);
@@ -453,6 +456,8 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
if (!hose)
return -ENOMEM;
+ /* set platform device as the parent */
+ hose->parent = &pdev->dev;
hose->first_busno = bus_range ? bus_range[0] : 0x0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
@@ -880,7 +885,7 @@ static int fsl_pci_probe(struct platform_device *pdev)
#endif
node = pdev->dev.of_node;
- ret = fsl_add_bridge(node, fsl_pci_primary == node);
+ ret = fsl_add_bridge(pdev, fsl_pci_primary == node);
#ifdef CONFIG_SWIOTLB
if (ret == 0) {
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index d078537..c495c00 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -91,7 +91,7 @@ struct ccsr_pci {
__be32 pex_err_cap_r3; /* 0x.e34 - PCIE error capture register 0 */
};
-extern int fsl_add_bridge(struct device_node *dev, int is_primary);
+extern int fsl_add_bridge(struct platform_device *pdev, int is_primary);
extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
extern int mpc83xx_add_bridge(struct device_node *dev);
u64 fsl_pci_immrbar_base(struct pci_controller *hose);
--
1.7.4.1
More information about the Linuxppc-dev
mailing list