[PATCH 1/4] powerpc: split sbc8548 dts file into pre and post chunks

[Kumar Gala]

On Jan 23, 2013, at 2:13 PM, Paul Gortmaker wrote:

> Updates to u-boot allow this board to boot off of either
> the 8MB soldered on flash, or the 64MB SODIMM flash.
> 
> This is achieved by changing JP12 and SW2.8 which in turn
> swaps which flash device appears on /CS0 and /CS6 respectively.
> 
> Since the flash devices are not the same size, this also
> changes the MTD memory map layout on the local bus.
> 
> Here we split the common chunks out into a pre and post
> include, so they can be reused by an upcoming "alternative
> boot" dts file; leaving only the local bus chunk behind.
> 
> No content changes are made at this point - it is just purely
> the move to using include files.
> 
> Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
> ---
> arch/powerpc/boot/dts/sbc8548-post.dtsi | 295 +++++++++++++++++++++++++++++
> arch/powerpc/boot/dts/sbc8548-pre.dtsi  |  52 ++++++
> arch/powerpc/boot/dts/sbc8548.dts       | 322 +-------------------------------
> 3 files changed, 351 insertions(+), 318 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/sbc8548-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/sbc8548-pre.dtsi

applied 1-4 to next

- k