[PATCH v2] net: fec_mpc52xx: Read MAC address from device-tree

[Stefan Roese]

On 12.02.2013 11:56, Bhushan Bharat-R65777 wrote:
>> Until now, the MPC5200 FEC ethernet driver relied upon the bootloader
>> (U-Boot) to write the MAC address into the ethernet controller registers. The
>> Linux driver should not rely on such a thing. So lets read the MAC address from
>> the DT as it should be done here.
>>
>> The following priority is now used to read the MAC address:
>>
>> 1) First, try OF node MAC address, if not present or invalid, then:
>>
>> 2) Read from MAC address registers, if invalid, then:
> 
> Why we read from MAC registers if Linux should not rely on bootloader?

It was suggested by David. Backwards compatibility. Here Davids comment
to my original patch which removed this register reading completely:

"
I don't think this is a conservative enough change.

You have to keep the MAC register reading code around, as a backup
code path in case the OF device node lacks a MAC address
"

Thanks,
Stefan