[RFC PATCH v2 3/4] powerpc: refactor of_get_cpu_node to support other architectures

Grant Likely grant.likely at linaro.org
Thu Aug 29 05:46:38 EST 2013


On Thu, 22 Aug 2013 14:59:30 +0100, Mark Rutland <mark.rutland at arm.com> wrote:
> On Mon, Aug 19, 2013 at 02:56:10PM +0100, Sudeep KarkadaNagesha wrote:
> > On 19/08/13 14:02, Rob Herring wrote:
> > > On 08/19/2013 05:19 AM, Mark Rutland wrote:
> > >> On Sat, Aug 17, 2013 at 11:09:36PM +0100, Benjamin Herrenschmidt wrote:
> > >>> On Sat, 2013-08-17 at 12:50 +0200, Tomasz Figa wrote:
> > >>>> I wonder how would this handle uniprocessor ARM (pre-v7) cores, for
> > >>>> which 
> > >>>> the updated bindings[1] define #address-cells = <0> and so no reg 
> > >>>> property.
> > >>>>
> > >>>> [1] - http://thread.gmane.org/gmane.linux.ports.arm.kernel/260795
> > >>>
> > >>> Why did you do that in the binding ? That sounds like looking to create
> > >>> problems ... 
> > >>>
> > >>> Traditionally, UP setups just used "0" as the "reg" property on other
> > >>> architectures, why do differently ?
> > >>
> > >> The decision was taken because we defined our reg property to refer to
> > >> the MPIDR register's Aff{2,1,0} bitfields, and on UP cores before v7
> > >> there's no MPIDR register at all. Given there can only be a single CPU
> > >> in that case, describing a register that wasn't present didn't seem
> > >> necessary or helpful.
> > > 
> > > What exactly reg represents is up to the binding definition, but it
> > > still should be present IMO. I don't see any issue with it being
> > > different for pre-v7.
> > > 
> > Yes it's better to have 'reg' with value 0 than not having it.
> > Otherwise this generic of_get_cpu_node implementation would need some
> > _hack_ to handle that case.
> 
> I'm not sure that having some code to handle a difference in standard
> between two architectures is a hack. If anything, I'd argue encoding a
> reg of 0 that corresponds to a nonexistent MPIDR value (given that's
> what the reg property is defined to map to on ARM) is more of a hack ;)
> 
> I'm not averse to having a reg value of 0 for this case, but given that
> there are existing devicetrees without it, requiring a reg property will
> break compatibility with them.

Then special cases those device trees, but you changing existing
convention really needs to be avoided. The referenced documentation
change is brand new, so we're not stuck with it.

g.



More information about the Linuxppc-dev mailing list