[v3] powerpc/mpc85xx: Update the clock device tree nodes

[Scott Wood]

On Thu, Jun 06, 2013 at 09:06:51AM +0800, tang yuantian wrote:
> From: Tang Yuantian <yuantian.tang at freescale.com>
> 
> The following SoCs will be affected: p2041, p3041, p4080,
> p5020, p5040, b4420, b4860, t4240
> 
> Signed-off-by: Tang Yuantian <Yuantian.Tang at freescale.com>
> Signed-off-by: Li Yang <leoli at freescale.com>
> 
> ---
> v3:
> 	- fix typo
> v2:
> 	- add t4240, b4420, b4860 support
> 	- remove pll/4 clock from p2041, p3041 and p5020 board
> 
>  arch/powerpc/boot/dts/fsl/b4420si-post.dtsi |  32 ++++++++-
>  arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |   2 +
>  arch/powerpc/boot/dts/fsl/b4860si-post.dtsi |  32 ++++++++-
>  arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  |   4 ++
>  arch/powerpc/boot/dts/fsl/p2041si-post.dtsi |  54 ++++++++++++++-
>  arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi  |   4 ++
>  arch/powerpc/boot/dts/fsl/p3041si-post.dtsi |  54 ++++++++++++++-
>  arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi  |   4 ++
>  arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 100 +++++++++++++++++++++++++++-
>  arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi  |   8 +++
>  arch/powerpc/boot/dts/fsl/p5020si-post.dtsi |  38 ++++++++++-
>  arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi  |   2 +
>  arch/powerpc/boot/dts/fsl/p5040si-post.dtsi |  54 ++++++++++++++-
>  arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi  |   4 ++
>  arch/powerpc/boot/dts/fsl/t4240si-post.dtsi |  77 ++++++++++++++++++++-
>  arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi  |  12 ++++
>  16 files changed, 473 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> index 5a6615d..b69d6e5 100644
> --- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> @@ -85,7 +85,37 @@
>  	};
>  
>  	clockgen: global-utilities at e1000 {
> -		compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
> +		compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0",
> +				   "fixed-clock";
> +		clock-output-names = "sysclk";
> +		#clock-cells = <0>;

Does U-Boot fill in clock-frequency here?

> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pll0: pll0 at 800 {
> +			#clock-cells = <1>;
> +			reg = <0x800>;
> +			compatible = "fsl,core-pll-clock";
> +			clocks = <&clockgen>;
> +			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
> +		};
> +		pll1: pll1 at 820 {
> +			#clock-cells = <1>;
> +			reg = <0x820>;
> +			compatible = "fsl,core-pll-clock";
> +			clocks = <&clockgen>;
> +			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
> +		};

Please leave a blank line between properties and nodes, and between
nodes.

What does reg represent?  Where is the binding for this?

The compatible is too vague.

> +		mux0: mux0 at 0 {
> +			#clock-cells = <0>;
> +			reg = <0x0>;
> +			compatible = "fsl,core-mux-clock";
> +			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> +				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
> +			clock-names = "pll0_0", "pll0_1", "pll0_2",
> +				"pll1_0", "pll1_1", "pll1_2";
> +			clock-output-names = "cmux0";
> +		};

What does reg represent?  Where is the binding for this?

The compatible is too vague.

-Scott