[PATCH 2/4 V2] mmc: esdhc: workaround for dma err in the last system transaction

[Scott Wood]

On Fri, 2013-08-23 at 14:39 +0800, Zhang Haijun wrote:
> Hi, Anton and all
> 
> Is there any advice on these two patches ?
> 
> [PATCH 2/4 V2] mmc: esdhc: workaround for dma err in the last system 
> transaction
> [PATCH 3/4 V3] mmc: esdhc: Correct host version of T4240-R1.0-R2.0.
> 
> 
> [PATCH 1/4 V4] powerpc/85xx: Add support for 85xx cpu type detection
> This patch is Act-by Scott.
> Patch 4/4 is split to four patches and Act-by Anton.
> 
> 
> Thanks all.
> 
> 
> 
[snip]
> >> +	if (!(((SVR_SOC_VER(svr) == SVR_T4240) && (SVR_REV(svr) == 0x10))
> >> ||
> >> +		((SVR_SOC_VER(svr) == SVR_B4860) && (SVR_REV(svr) == 0x10))
> >> ||
> >> +		((SVR_SOC_VER(svr) == SVR_P1010) && (SVR_REV(svr) == 0x10))
> >> ||
> >> +		((SVR_SOC_VER(svr) == SVR_P3041) && (SVR_REV(svr) <= 0x20))
> >> ||
> >> +		((SVR_SOC_VER(svr) == SVR_P2041) && (SVR_REV(svr) <= 0x20))
> >> ||
> >> +		((SVR_SOC_VER(svr) == SVR_P5040) && SVR_REV(svr) == 0x20)))
> >> +		return;

You need to include variants here.  If P5040 is affected, then P5021 is
affected.  If P2041 is affected, then P2040 is affected, etc.

-Scott