[PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver

[Tomasz Figa]

On Friday 16 of August 2013 10:56:32 Sascha Hauer wrote:
> On Fri, Aug 16, 2013 at 04:01:25PM +0800, Nicolin Chen wrote:
> > Hi Sascha,
> > 
> >    Thank you for the detailed comments.
> > 
> > On Fri, Aug 16, 2013 at 09:08:18AM +0200, Sascha Hauer wrote:
> > > Which of them the driver should use is configuration and thus
> > > normally
> > > should *not* be described in the devicetree. However, there may be
> > > no
> > > good way for the driver to know which clock to use in which case.
> > > There
> > > may be additional board requirements which are unknown to the
> > > driver. So in this case it might be valid to put the information
> > > which clock to use into the devicetree. But be aware that from the
> > > moment you put this information into the devicetree the driver is
> > > no longer free to chose the best clock, even if in future we find a
> > > good way to automatically guess the best clock. Do you have some
> > > insights in which case I would use which input clock? Is this only
> > > about which clock has the best suitable input frequency or is this
> > > also about synchronization of the audio signal with some other
> > > unit?
> > 
> > I understand. What I'm thinking now is to let the driver find the best
> > clock source for tx clock and a correspond divisor like this:
> > 
> > "tx<0-8>"	Optional	Tx clock source for spdif playback.
> > 
> > 				If absent, will use core clock.
> > 				The index from 0 to 8 is identical
> > 				to the clock source list described
> > 				in TxClk_Source bit of register STC.
> > 				Multiple clock source are allowed
> > 				for this tx clock source. The driver
> > 				will select one source from them for
> > 				each supported sample rate according
> > 				to the clock rates of these provided
> > 				clock sources.
> 
> You mean tx<0-7>.
> 
> Also I would make this option required. Use a dummy clock for mux inputs
> that are grounded for a specific SoC.

Why do you need a dummy clock?

The driver can simply try to grab all the possible clocks and discard 
those that failed, so you can just keep those grounded clocks unspecified.

Best regards,
Tomasz