[PATCH v4 1/3] powerpc/85xx: Add SEC6.0 device tree
Po Liu
Po.Liu at freescale.com
Fri Aug 2 16:39:09 EST 2013
From: Mingkai Hu <Mingkai.Hu at freescale.com>
Add device tree for SEC 6.0 used on C29x silicon.
Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
Signed-off-by: Po Liu <Po.Liu at freescale.com>
---
Changes for v2:
- Remove the compatible sec v4.0/v4.4/v5.0;
- Add the device tree binding file fsl-sec6.txt;
Changes for v3:
- Change some comments in fsl-sec6.txt
Changes for v4:
- Change the full example in fsl-sec6.txt
.../devicetree/bindings/crypto/fsl-sec6.txt | 157 +++++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi | 56 ++++++++
2 files changed, 213 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/fsl-sec6.txt
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
new file mode 100644
index 0000000..c0a20cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
@@ -0,0 +1,157 @@
+SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
+Currently Freescale powerpc chip C29X is embeded with SEC 6.
+SEC 6 device tree binding include:
+ -SEC 6 Node
+ -Job Ring Node
+ -Full Example
+
+=====================================================================
+SEC 6 Node
+
+Description
+
+ Node defines the base address of the SEC 6 block.
+ This block specifies the address range of all global
+ configuration registers for the SEC 6 block.
+ For example, In C293, we could see three SEC 6 node.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v6.0".
+
+ - fsl,sec-era
+ Usage: optional
+ Value type: <u32>
+ Definition: A standard property. Define the 'ERA' of the SEC
+ device.
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing physical addresses in child nodes.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing the size of physical addresses in
+ child nodes.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical
+ address and length of the SEC 6 configuration registers.
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the SEC 6.0 register space (-SNVS not included). A
+ triplet that includes the child address, parent address, &
+ length.
+
+ Note: All other standard properties (see the ePAPR) are allowed
+ but are optional.
+
+EXAMPLE
+ crypto at a0000 {
+ compatible = "fsl,sec-v6.0";
+ fsl,sec-era = <6>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xa0000 0x20000>;
+ ranges = <0 0xa0000 0x20000>;
+ };
+
+=====================================================================
+Job Ring (JR) Node
+
+ Child of the crypto node defines data processing interface to SEC 6
+ across the peripheral bus for purposes of processing
+ cryptographic descriptors. The specified address
+ range can be made visible to one (or more) cores.
+ The interrupt defined for this node is controlled within
+ the address range of this node.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v6.0-job-ring".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Specifies a two JR parameters: an offset from
+ the parent physical address and the length the JR registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+EXAMPLE
+ jr at 1000 {
+ compatible = "fsl,sec-v6.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <49 2 0 0>;
+ };
+
+===================================================================
+Full Example
+
+Since some chips may contain more than one SEC, the dtsi contains
+only the node contents, not the node itself. A chip using the SEC
+should include the dtsi inside each SEC node. Example:
+
+In qoriq-sec6.0.dtsi:
+
+ compatible = "fsl,sec-v6.0";
+ fsl,sec-era = <6>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ jr at 1000 {
+ compatible = "fsl,sec-v6.0-job-ring",
+ "fsl,sec-v5.2-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.4-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ };
+
+ jr at 2000 {
+ compatible = "fsl,sec-v6.0-job-ring",
+ "fsl,sec-v5.2-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.4-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ };
+
+In the C293 device tree, we add the include of public property:
+
+ crypto at a0000 {
+ /include/ "qoriq-sec6.0.dtsi"
+ }
+
+ crypto at a0000 {
+ reg = <0xa0000 0x20000>;
+ ranges = <0 0xa0000 0x20000>;
+
+ jr at 1000 {
+ interrupts = <49 2 0 0>;
+ };
+
+ jr at 2000 {
+ interrupts = <50 2 0 0>;
+ };
+ };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
new file mode 100644
index 0000000..f75b4f820
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
@@ -0,0 +1,56 @@
+/*
+ * QorIQ Sec/Crypto 6.0 device tree stub
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ compatible = "fsl,sec-v6.0";
+ fsl,sec-era = <6>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ jr at 1000 {
+ compatible = "fsl,sec-v6.0-job-ring",
+ "fsl,sec-v5.2-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.4-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ };
+
+ jr at 2000 {
+ compatible = "fsl,sec-v6.0-job-ring",
+ "fsl,sec-v5.2-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.4-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ };
--
1.8.0
More information about the Linuxppc-dev
mailing list