[RFC PATCH 3/3] pci: Use common definations of INDIRECT_TYPE_*
Andrew Murray
Andrew.Murray at arm.com
Thu Apr 25 19:49:20 EST 2013
This patch unifies similar definations of INDIRECT_TYPE_* between
PowerPC and Microblaze.
Signed-off-by: Andrew Murray <Andrew.Murray at arm.com>
---
arch/microblaze/include/asm/pci-bridge.h | 23 -----------------------
arch/powerpc/include/asm/pci-bridge.h | 23 -----------------------
arch/powerpc/sysdev/fsl_pci.c | 16 ++++++++--------
arch/powerpc/sysdev/indirect_pci.c | 20 ++++++++++----------
arch/powerpc/sysdev/ppc4xx_pci.c | 4 ++--
arch/powerpc/sysdev/xilinx_pci.c | 2 +-
include/asm-generic/pci-bridge.h | 22 ++++++++++++++++++++++
7 files changed, 43 insertions(+), 67 deletions(-)
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 0ee75dc..acf8252 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -24,29 +24,6 @@ static inline int pcibios_vaddr_is_ioport(void __iomem *address)
}
#endif
-/*
- * Used for variants of PCI indirect handling and possible quirks:
- * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
- * EXT_REG - provides access to PCI-e extended registers
- * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
- * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
- * to determine which bus number to match on when generating type0
- * config cycles
- * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
- * hanging if we don't have link and try to do config cycles to
- * anything but the PHB. Only allow talking to the PHB if this is
- * set.
- * BIG_ENDIAN - cfg_addr is a big endian register
- * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
- * on the PLB4. Effectively disable MRM commands by setting this.
- */
-#define INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
-#define INDIRECT_TYPE_EXT_REG 0x00000002
-#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
-#define INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
-#define INDIRECT_TYPE_BIG_ENDIAN 0x00000010
-#define INDIRECT_TYPE_BROKEN_MRM 0x00000020
-
#ifdef CONFIG_PCI
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 163bd40..b2bbf05 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -14,29 +14,6 @@
struct device_node;
-/*
- * Used for variants of PCI indirect handling and possible quirks:
- * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
- * EXT_REG - provides access to PCI-e extended registers
- * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
- * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
- * to determine which bus number to match on when generating type0
- * config cycles
- * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
- * hanging if we don't have link and try to do config cycles to
- * anything but the PHB. Only allow talking to the PHB if this is
- * set.
- * BIG_ENDIAN - cfg_addr is a big endian register
- * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
- * the PLB4. Effectively disable MRM commands by setting this.
- */
-#define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
-#define PPC_INDIRECT_TYPE_EXT_REG 0x00000002
-#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
-#define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
-#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010
-#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020
-
/* These are used for config access before all the PCI probing
has been done. */
extern int early_read_config_byte(struct pci_controller *hose, int bus,
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 682084d..d73f94a 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -399,7 +399,7 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus)
if (fsl_pcie_bus_fixup)
is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
- no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);
+ no_link = !!(hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK);
if (bus->parent == hose->bus && (is_pcie || no_link)) {
for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {
@@ -462,7 +462,7 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
- PPC_INDIRECT_TYPE_BIG_ENDIAN);
+ INDIRECT_TYPE_BIG_ENDIAN);
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
/* For PCIE read HEADER_TYPE to identify controler mode */
@@ -481,10 +481,10 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
/* check PCI express link status */
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
- hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
- PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
+ hose->indirect_type |= INDIRECT_TYPE_EXT_REG |
+ INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
if (fsl_pcie_check_link(hose))
- hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+ hose->indirect_type |= INDIRECT_TYPE_NO_PCIE_LINK;
}
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
@@ -545,7 +545,7 @@ static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
{
struct pci_controller *hose = pci_bus_to_host(bus);
- if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
+ if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Workaround for the HW bug: for Type 0 configure transactions the
@@ -628,7 +628,7 @@ static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
if (!cfg_addr)
return PCIBIOS_DEVICE_NOT_FOUND;
- /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
+ /* INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
val &= 0xffffff00;
@@ -686,7 +686,7 @@ static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0);
if (fsl_pcie_check_link(hose))
- hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+ hose->indirect_type |= INDIRECT_TYPE_NO_PCIE_LINK;
return 0;
err1:
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 82fdad8..aa9dd5d 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -29,7 +29,7 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
u8 cfg_type = 0;
u32 bus_no, reg;
- if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
+ if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
if (bus->number != hose->first_busno)
return PCIBIOS_DEVICE_NOT_FOUND;
if (devfn != 0)
@@ -40,19 +40,19 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
- if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE)
+ if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
if (bus->number != hose->first_busno)
cfg_type = 1;
bus_no = (bus->number == hose->first_busno) ?
hose->self_busno : bus->number;
- if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)
+ if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
else
reg = offset & 0xfc;
- if (hose->indirect_type & PPC_INDIRECT_TYPE_BIG_ENDIAN)
+ if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
(devfn << 8) | reg | cfg_type));
else
@@ -87,7 +87,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
u8 cfg_type = 0;
u32 bus_no, reg;
- if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
+ if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
if (bus->number != hose->first_busno)
return PCIBIOS_DEVICE_NOT_FOUND;
if (devfn != 0)
@@ -98,19 +98,19 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
- if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE)
+ if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
if (bus->number != hose->first_busno)
cfg_type = 1;
bus_no = (bus->number == hose->first_busno) ?
hose->self_busno : bus->number;
- if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)
+ if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
else
reg = offset & 0xfc;
- if (hose->indirect_type & PPC_INDIRECT_TYPE_BIG_ENDIAN)
+ if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
(devfn << 8) | reg | cfg_type));
else
@@ -118,13 +118,13 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
(devfn << 8) | reg | cfg_type));
/* suppress setting of PCI_PRIMARY_BUS */
- if (hose->indirect_type & PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
+ if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
if ((offset == PCI_PRIMARY_BUS) &&
(bus->number == hose->first_busno))
val &= 0xffffff00;
/* Workaround for PCI_28 Errata in 440EPx/GRx */
- if ((hose->indirect_type & PPC_INDIRECT_TYPE_BROKEN_MRM) &&
+ if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
offset == PCI_CACHE_LINE_SIZE) {
val = 0;
}
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 56e8b3c..745cd7a 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -73,7 +73,7 @@ static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
if (of_device_is_compatible(hose->dn, "ibm,plb440epx-pci") ||
of_device_is_compatible(hose->dn, "ibm,plb440grx-pci")) {
- hose->indirect_type |= PPC_INDIRECT_TYPE_BROKEN_MRM;
+ hose->indirect_type |= INDIRECT_TYPE_BROKEN_MRM;
}
/* Hide the PCI host BARs from the kernel as their content doesn't
@@ -577,7 +577,7 @@ static void __init ppc4xx_probe_pcix_bridge(struct device_node *np)
/* Setup config space */
setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4,
- PPC_INDIRECT_TYPE_SET_CFG_TYPE);
+ INDIRECT_TYPE_SET_CFG_TYPE);
/* Disable all windows */
writel(0, reg + PCIX0_POM0SA);
diff --git a/arch/powerpc/sysdev/xilinx_pci.c b/arch/powerpc/sysdev/xilinx_pci.c
index 1453b0e..67d4858 100644
--- a/arch/powerpc/sysdev/xilinx_pci.c
+++ b/arch/powerpc/sysdev/xilinx_pci.c
@@ -104,7 +104,7 @@ void __init xilinx_pci_init(void)
/* Setup config space */
setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
r.start + XPLB_PCI_DATA,
- PPC_INDIRECT_TYPE_SET_CFG_TYPE);
+ INDIRECT_TYPE_SET_CFG_TYPE);
/* According to the xilinx plbv46_pci documentation the soft-core starts
* a self-init when the bus master enable bit is set. Without this bit
diff --git a/include/asm-generic/pci-bridge.h b/include/asm-generic/pci-bridge.h
index 1a7f96d..c627c59 100644
--- a/include/asm-generic/pci-bridge.h
+++ b/include/asm-generic/pci-bridge.h
@@ -87,6 +87,28 @@ struct pci_controller {
unsigned int __iomem *cfg_addr;
void __iomem *cfg_data;
+ /*
+ * Used for variants of PCI indirect handling and possible quirks:
+ * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+ * EXT_REG - provides access to PCI-e extended registers
+ * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
+ * on PCI-e controllers since they used the PCI_PRIMARY_BUS
+ * to determine which bus number to match on when generating type0
+ * config cycles
+ * NO_PCIE_LINK - some PCI-e controllers have issues with
+ * hanging if we don't have link and try to do config cycles to
+ * anything but the PHB. Only allow talking to the PHB if this is
+ * set.
+ * BIG_ENDIAN - cfg_addr is a big endian register
+ * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
+ * on the PLB4. Effectively disable MRM commands by setting this.
+ */
+#define INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
+#define INDIRECT_TYPE_EXT_REG 0x00000002
+#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
+#define INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
+#define INDIRECT_TYPE_BIG_ENDIAN 0x00000010
+#define INDIRECT_TYPE_BROKEN_MRM 0x00000020
u32 indirect_type;
/* Currently, we limit ourselves to 1 IO range and 3 mem
* ranges since the common pci_bus structure can't handle more
--
1.7.0.4
More information about the Linuxppc-dev
mailing list