[PATCH 2/4] powerpc/85xx: Add silicon device tree for C293

Po Liu Po.Liu at freescale.com
Thu Apr 25 11:54:15 EST 2013


From: Mingkai Hu <Mingkai.Hu at freescale.com>

Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
Signed-off-by: Po Liu <Po.Liu at freescale.com>
---
Base on git://git.am.freescale.net/gitolite/mirrors/linux-2.6.git
 arch/powerpc/boot/dts/fsl/c293si-post.dtsi | 193 +++++++++++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/c293si-pre.dtsi  |  63 ++++++++++
 2 files changed, 256 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/fsl/c293si-post.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/c293si-pre.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
new file mode 100644
index 0000000..bd20832
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
@@ -0,0 +1,193 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie at 0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law at 0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm at 1000 {
+		compatible = "fsl,c293-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller at 2000 {
+		compatible = "fsl,c293-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi at 7000 {
+		fsl,espi-num-chipselects = <1>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	L2: l2-cache-controller at 20000 {
+		compatible = "fsl,c293-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2,512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc at 2e000 {
+		compatible = "fsl,c293-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+	crypto at 80000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto at 80000 {
+		reg = <0x80000 0x20000>;
+		ranges = <0x0 0x80000 0x20000>;
+
+		jr at 1000{
+			interrupts = <45 2 0 0>;
+		};
+		jr at 2000{
+			interrupts = <57 2 0 0>;
+		};
+	};
+
+	crypto at a0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto at a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0x0 0xa0000 0x20000>;
+
+		jr at 1000{
+			interrupts = <49 2 0 0>;
+		};
+		jr at 2000{
+			interrupts = <50 2 0 0>;
+		};
+	};
+
+	crypto at c0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto at c0000 {
+		reg = <0xc0000 0x20000>;
+		ranges = <0x0 0xc0000 0x20000>;
+
+		jr at 1000{
+			interrupts = <55 2 0 0>;
+		};
+		jr at 2000{
+			interrupts = <56 2 0 0>;
+		};
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: ethernet at b0000 {
+		queue-group at b0000 {
+			reg = <0x10000 0x1000>;
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: ethernet at b1000 {
+		queue-group at b1000 {
+			reg = <0x11000 0x1000>;
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+	global-utilities at e0000 {
+		compatible = "fsl,c293-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi
new file mode 100644
index 0000000..065049d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,C293";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,e500v2 at 0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
-- 
1.8.0




More information about the Linuxppc-dev mailing list