[PATCH v2 1/2] serial/mpc52xx_uart: prepare for adding MPC5125 PSC UART support
Anatolij Gustschin
agust at denx.de
Thu Apr 18 07:21:41 EST 2013
From: Matteo Facchinetti <matteo.facchinetti at sirius-es.it>
MPC5125 PSC controller has different register layout than MPC5121.
To support MPC5125 PSC in this driver we have to provide further
psc_ops functions for SoC specific register accesses.
Add new register access functions to the psc_ops structure and
provide MPC52xx and MPC512x specific implementation for them.
Then replace remaining direct register accesses in the driver by
appropriate psc_ops function calls. The subsequent patch can now
add MPC5125 specific set of psc_ops functions.
Signed-off-by: Vladimir Ermakov <vooon341 at gmail.com>
Signed-off-by: Matteo Facchinetti <matteo.facchinetti at sirius-es.it>
Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
Greg, with your Acked-by I can push these patches to my mpc5xxx tree.
But it is fine with me if you prefer to apply them to tty tree.
Thanks,
Anatolij
Changes in v2:
- split into two patches to simplify review
- minor coding style changes
- revise commit log
drivers/tty/serial/mpc52xx_uart.c | 161 +++++++++++++++++++++++++++----------
1 file changed, 119 insertions(+), 42 deletions(-)
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 018bad9..5aa87ac 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -122,6 +122,15 @@ struct psc_ops {
void (*fifoc_uninit)(void);
void (*get_irq)(struct uart_port *, struct device_node *);
irqreturn_t (*handle_irq)(struct uart_port *port);
+ u16 (*get_status)(struct uart_port *port);
+ u8 (*get_ipcr)(struct uart_port *port);
+ void (*command)(struct uart_port *port, u8 cmd);
+ void (*set_mode)(struct uart_port *port, u8 mr1, u8 mr2);
+ void (*set_rts)(struct uart_port *port, int state);
+ void (*enable_ms)(struct uart_port *port);
+ void (*set_sicr)(struct uart_port *port, u32 val);
+ void (*set_imr)(struct uart_port *port, u16 val);
+ u8 (*get_mr1)(struct uart_port *port);
};
/* setting the prescaler and divisor reg is common for all chips */
@@ -134,6 +143,65 @@ static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
out_8(&psc->ctlr, divisor & 0xff);
}
+static u16 mpc52xx_psc_get_status(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status);
+}
+
+static u8 mpc52xx_psc_get_ipcr(struct uart_port *port)
+{
+ return in_8(&PSC(port)->mpc52xx_psc_ipcr);
+}
+
+static void mpc52xx_psc_command(struct uart_port *port, u8 cmd)
+{
+ out_8(&PSC(port)->command, cmd);
+}
+
+static void mpc52xx_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2)
+{
+ out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1);
+ out_8(&PSC(port)->mode, mr1);
+ out_8(&PSC(port)->mode, mr2);
+}
+
+static void mpc52xx_psc_set_rts(struct uart_port *port, int state)
+{
+ if (state)
+ out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
+ else
+ out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
+}
+
+static void mpc52xx_psc_enable_ms(struct uart_port *port)
+{
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+
+ /* clear D_*-bits by reading them */
+ in_8(&psc->mpc52xx_psc_ipcr);
+ /* enable CTS and DCD as IPC interrupts */
+ out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+ port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_set_sicr(struct uart_port *port, u32 val)
+{
+ out_be32(&PSC(port)->sicr, val);
+}
+
+static void mpc52xx_psc_set_imr(struct uart_port *port, u16 val)
+{
+ out_be16(&PSC(port)->mpc52xx_psc_imr, val);
+}
+
+static u8 mpc52xx_psc_get_mr1(struct uart_port *port)
+{
+ out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1);
+ return in_8(&PSC(port)->mode);
+}
+
#ifdef CONFIG_PPC_MPC52xx
#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
static void mpc52xx_psc_fifo_init(struct uart_port *port)
@@ -304,6 +372,15 @@ static struct psc_ops mpc52xx_psc_ops = {
.set_baudrate = mpc5200_psc_set_baudrate,
.get_irq = mpc52xx_psc_get_irq,
.handle_irq = mpc52xx_psc_handle_irq,
+ .get_status = mpc52xx_psc_get_status,
+ .get_ipcr = mpc52xx_psc_get_ipcr,
+ .command = mpc52xx_psc_command,
+ .set_mode = mpc52xx_psc_set_mode,
+ .set_rts = mpc52xx_psc_set_rts,
+ .enable_ms = mpc52xx_psc_enable_ms,
+ .set_sicr = mpc52xx_psc_set_sicr,
+ .set_imr = mpc52xx_psc_set_imr,
+ .get_mr1 = mpc52xx_psc_get_mr1,
};
static struct psc_ops mpc5200b_psc_ops = {
@@ -325,6 +402,15 @@ static struct psc_ops mpc5200b_psc_ops = {
.set_baudrate = mpc5200b_psc_set_baudrate,
.get_irq = mpc52xx_psc_get_irq,
.handle_irq = mpc52xx_psc_handle_irq,
+ .get_status = mpc52xx_psc_get_status,
+ .get_ipcr = mpc52xx_psc_get_ipcr,
+ .command = mpc52xx_psc_command,
+ .set_mode = mpc52xx_psc_set_mode,
+ .set_rts = mpc52xx_psc_set_rts,
+ .enable_ms = mpc52xx_psc_enable_ms,
+ .set_sicr = mpc52xx_psc_set_sicr,
+ .set_imr = mpc52xx_psc_set_imr,
+ .get_mr1 = mpc52xx_psc_get_mr1,
};
#endif /* CONFIG_MPC52xx */
@@ -595,8 +681,18 @@ static struct psc_ops mpc512x_psc_ops = {
.fifoc_uninit = mpc512x_psc_fifoc_uninit,
.get_irq = mpc512x_psc_get_irq,
.handle_irq = mpc512x_psc_handle_irq,
+ .get_status = mpc52xx_psc_get_status,
+ .get_ipcr = mpc52xx_psc_get_ipcr,
+ .command = mpc52xx_psc_command,
+ .set_mode = mpc52xx_psc_set_mode,
+ .set_rts = mpc52xx_psc_set_rts,
+ .enable_ms = mpc52xx_psc_enable_ms,
+ .set_sicr = mpc52xx_psc_set_sicr,
+ .set_imr = mpc52xx_psc_set_imr,
+ .get_mr1 = mpc52xx_psc_get_mr1,
};
-#endif
+#endif /* CONFIG_PPC_MPC512x */
+
static const struct psc_ops *psc_ops;
@@ -613,17 +709,14 @@ mpc52xx_uart_tx_empty(struct uart_port *port)
static void
mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- if (mctrl & TIOCM_RTS)
- out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
- else
- out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
+ psc_ops->set_rts(port, mctrl & TIOCM_RTS);
}
static unsigned int
mpc52xx_uart_get_mctrl(struct uart_port *port)
{
unsigned int ret = TIOCM_DSR;
- u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+ u8 status = psc_ops->get_ipcr(port);
if (!(status & MPC52xx_PSC_CTS))
ret |= TIOCM_CTS;
@@ -673,15 +766,7 @@ mpc52xx_uart_stop_rx(struct uart_port *port)
static void
mpc52xx_uart_enable_ms(struct uart_port *port)
{
- struct mpc52xx_psc __iomem *psc = PSC(port);
-
- /* clear D_*-bits by reading them */
- in_8(&psc->mpc52xx_psc_ipcr);
- /* enable CTS and DCD as IPC interrupts */
- out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
-
- port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
- out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+ psc_ops->enable_ms(port);
}
static void
@@ -691,9 +776,9 @@ mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
spin_lock_irqsave(&port->lock, flags);
if (ctl == -1)
- out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK);
+ psc_ops->command(port, MPC52xx_PSC_START_BRK);
else
- out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK);
+ psc_ops->command(port, MPC52xx_PSC_STOP_BRK);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -701,7 +786,6 @@ mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
static int
mpc52xx_uart_startup(struct uart_port *port)
{
- struct mpc52xx_psc __iomem *psc = PSC(port);
int ret;
if (psc_ops->clock) {
@@ -717,15 +801,15 @@ mpc52xx_uart_startup(struct uart_port *port)
return ret;
/* Reset/activate the port, clear and enable interrupts */
- out_8(&psc->command, MPC52xx_PSC_RST_RX);
- out_8(&psc->command, MPC52xx_PSC_RST_TX);
+ psc_ops->command(port, MPC52xx_PSC_RST_RX);
+ psc_ops->command(port, MPC52xx_PSC_RST_TX);
- out_be32(&psc->sicr, 0); /* UART mode DCD ignored */
+ psc_ops->set_sicr(port, 0); /* UART mode DCD ignored */
psc_ops->fifo_init(port);
- out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
- out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
+ psc_ops->command(port, MPC52xx_PSC_TX_ENABLE);
+ psc_ops->command(port, MPC52xx_PSC_RX_ENABLE);
return 0;
}
@@ -733,15 +817,13 @@ mpc52xx_uart_startup(struct uart_port *port)
static void
mpc52xx_uart_shutdown(struct uart_port *port)
{
- struct mpc52xx_psc __iomem *psc = PSC(port);
-
/* Shut down the port. Leave TX active if on a console port */
- out_8(&psc->command, MPC52xx_PSC_RST_RX);
+ psc_ops->command(port, MPC52xx_PSC_RST_RX);
if (!uart_console(port))
- out_8(&psc->command, MPC52xx_PSC_RST_TX);
+ psc_ops->command(port, MPC52xx_PSC_RST_TX);
port->read_status_mask = 0;
- out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+ psc_ops->set_imr(port, port->read_status_mask);
if (psc_ops->clock)
psc_ops->clock(port, 0);
@@ -754,7 +836,6 @@ static void
mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
struct ktermios *old)
{
- struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned long flags;
unsigned char mr1, mr2;
unsigned int j;
@@ -818,13 +899,11 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
"Some chars may have been lost.\n");
/* Reset the TX & RX */
- out_8(&psc->command, MPC52xx_PSC_RST_RX);
- out_8(&psc->command, MPC52xx_PSC_RST_TX);
+ psc_ops->command(port, MPC52xx_PSC_RST_RX);
+ psc_ops->command(port, MPC52xx_PSC_RST_TX);
/* Send new mode settings */
- out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
- out_8(&psc->mode, mr1);
- out_8(&psc->mode, mr2);
+ psc_ops->set_mode(port, mr1, mr2);
baud = psc_ops->set_baudrate(port, new, old);
/* Update the per-port timeout */
@@ -834,8 +913,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
mpc52xx_uart_enable_ms(port);
/* Reenable TX & RX */
- out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
- out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
+ psc_ops->command(port, MPC52xx_PSC_TX_ENABLE);
+ psc_ops->command(port, MPC52xx_PSC_RX_ENABLE);
/* We're all set, release the lock */
spin_unlock_irqrestore(&port->lock, flags);
@@ -963,7 +1042,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
flag = TTY_NORMAL;
port->icount.rx++;
- status = in_be16(&PSC(port)->mpc52xx_psc_status);
+ status = psc_ops->get_status(port);
if (status & (MPC52xx_PSC_SR_PE |
MPC52xx_PSC_SR_FE |
@@ -983,7 +1062,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
}
/* Clear error condition */
- out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
+ psc_ops->command(port, MPC52xx_PSC_RST_ERR_STAT);
}
tty_insert_flip_char(tport, ch, flag);
@@ -1066,7 +1145,7 @@ mpc5xxx_uart_process_int(struct uart_port *port)
if (psc_ops->tx_rdy(port))
keepgoing |= mpc52xx_uart_int_tx_chars(port);
- status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+ status = psc_ops->get_ipcr(port);
if (status & MPC52xx_PSC_D_DCD)
uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
@@ -1107,14 +1186,12 @@ static void __init
mpc52xx_console_get_options(struct uart_port *port,
int *baud, int *parity, int *bits, int *flow)
{
- struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned char mr1;
pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
/* Read the mode registers */
- out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
- mr1 = in_8(&psc->mode);
+ mr1 = psc_ops->get_mr1(port);
/* CT{U,L}R are write-only ! */
*baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
--
1.7.9.5
More information about the Linuxppc-dev
mailing list