[PATCH 4/5] powerpc/fsl-booke: Add B4_QDS board support
Shaveta Leekha
shaveta at freescale.com
Tue Apr 2 18:16:07 EST 2013
- Add support for B4 board in board file b4_qds.c,
It is common for B4860, B4420 and B4220QDS as they share same QDS board
- Add B4QDS support in Kconfig and Makefile
B4860QDS is a high-performance computing evaluation, development and
test platform supporting the B4860 QorIQ Power Architecture processor,
with following major features:
- Four dual-threaded e6500 Power Architecture processors
organized in one cluster-each core runs up to 1.8 GHz
- Two DDR3/3L controllers for high-speed memory interface each
runs at up to 1866.67 MHz
- CoreNet fabric that fully supports coherency using MESI protocol
between the e6500 cores, SC3900 FVP cores, memories and
external interfaces.
- Data Path Acceleration Architecture having FMAN, QMan, BMan, SEC 5.3 and RMAN
- Large internal cache memory with snooping and stashing capabilities
- Sixteen 10-GHz SerDes lanes that serve:
- Two SRIO interfaces. Each supports up to 4 lanes and
a total of up to 8 lanes
- Up to 8-lanes Common Public Radio Interface (CPRI) controller
for glue-less antenna connection
- Two 10-Gbit Ethernet controllers (10GEC)
- Six 1G/2.5-Gbit Ethernet controllers for network communications
- PCI Express controller
- Debug (Aurora)
- Various system peripherals
B4420 and B4220 have some differences in comparison to B4860 with fewer core/clusters(both SC3900 and e6500),
fewer DDR controllers, fewer serdes lanes, fewer SGMII interfaces and reduced target frequencies.
Key differences between B4860 and B4420:
B4420 has:
- Fewer e6500 cores:
1 cluster with 2 e6500 cores
- Fewer SC3900 cores/clusters:
1 cluster with 2 SC3900 cores per cluster
- Single DDRC @ 1.6GHz
- 2 X 4 lane serdes
- 3 SGMII interfaces
- no sRIO
- no 10G
Key differences between B4860 and B4220:
B4220 has:
- Fewer e6500 cores:
1 cluster with 1 e6500 core
- Fewer SC3900 cores/clusters:
1 cluster with 2 SC3900 cores per cluster
- Single DDRC @ 1.33GHz
- 2 X 2 lane serdes
- 2 SGMII interfaces
- no sRIO
- no 10G
Signed-off-by: Shaveta Leekha <shaveta at freescale.com>
---
arch/powerpc/platforms/85xx/Kconfig | 17 ++++++
arch/powerpc/platforms/85xx/Makefile | 1 +
arch/powerpc/platforms/85xx/b4_qds.c | 102 ++++++++++++++++++++++++++++++++++
3 files changed, 120 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/85xx/b4_qds.c
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 31dc066..8f02b05 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -321,6 +321,23 @@ config T4240_QDS
help
This option enables support for the T4240 QDS board
+config B4_QDS
+ bool "Freescale B4 QDS"
+ select DEFAULT_UIMAGE
+ select E500
+ select PPC_E500MC
+ select PHYS_64BIT
+ select SWIOTLB
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAS_RAPIDIO
+ select PPC_EPAPR_HV_PIC
+ help
+ This option enables support for the B4 QDS board
+ The B4 application development system B4 QDS is a complete
+ debugging environment intended for engineers developing
+ applications for the B4.
+
endif
endif # FSL_SOC_BOOKE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 712e233..2eab37e 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_P5040_DS) += p5040_ds.o corenet_ds.o
obj-$(CONFIG_T4240_QDS) += t4240_qds.o corenet_ds.o
+obj-$(CONFIG_B4_QDS) += b4_qds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8548) += sbc8548.o
diff --git a/arch/powerpc/platforms/85xx/b4_qds.c b/arch/powerpc/platforms/85xx/b4_qds.c
new file mode 100644
index 0000000..0c6702f
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/b4_qds.c
@@ -0,0 +1,102 @@
+/*
+ * B4 QDS Setup
+ * Should apply for QDS platform of B4860 and it's personalities.
+ * viz B4860/B4420/B4220QDS
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init b4_qds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+ extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+ if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS")) ||
+ (of_flat_dt_is_compatible(root, "fsl,B4420QDS")) ||
+ (of_flat_dt_is_compatible(root, "fsl,B4220QDS")))
+ return 1;
+
+ /* Check if we're running under the Freescale hypervisor */
+ if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS-hv")) ||
+ (of_flat_dt_is_compatible(root, "fsl,B4420QDS-hv")) ||
+ (of_flat_dt_is_compatible(root, "fsl,B4220QDS-hv"))) {
+ ppc_md.init_IRQ = ehv_pic_init;
+ ppc_md.get_irq = ehv_pic_get_irq;
+ ppc_md.restart = fsl_hv_restart;
+ ppc_md.power_off = fsl_hv_halt;
+ ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+ /*
+ * Disable the timebase sync operations because we can't write
+ * to the timebase registers under the hypervisor.
+ */
+ smp_85xx_ops.give_timebase = NULL;
+ smp_85xx_ops.take_timebase = NULL;
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+define_machine(b4_qds) {
+ .name = "B4 QDS",
+ .probe = b4_qds_probe,
+ .setup_arch = corenet_ds_setup_arch,
+ .init_IRQ = corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
+#ifdef CONFIG_PPC64
+ .get_irq = mpic_get_irq,
+#else
+ .get_irq = mpic_get_coreint_irq,
+#endif
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PPC64
+ .power_save = book3e_idle,
+#else
+ .power_save = e500_idle,
+#endif
+};
+
+machine_arch_initcall(b4_qds, corenet_ds_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(b4_qds, swiotlb_setup_bus_notifier);
+#endif
--
1.7.6.GIT
More information about the Linuxppc-dev
mailing list