[RFC v9 PATCH 00/21] memory-hotplug: hot-remove physical memory

Ni zhan Chen nizhan.chen at gmail.com
Sat Sep 29 13:45:24 EST 2012


On 09/05/2012 05:25 PM, wency at cn.fujitsu.com wrote:
> From: Wen Congyang <wency at cn.fujitsu.com>
>
> This patch series aims to support physical memory hot-remove.
>
> The patches can free/remove the following things:
>
>    - acpi_memory_info                          : [RFC PATCH 4/19]
>    - /sys/firmware/memmap/X/{end, start, type} : [RFC PATCH 8/19]
>    - iomem_resource                            : [RFC PATCH 9/19]
>    - mem_section and related sysfs files       : [RFC PATCH 10-11, 13-16/19]
>    - page table of removed memory              : [RFC PATCH 12/19]
>    - node and related sysfs files              : [RFC PATCH 18-19/19]
>
> If you find lack of function for physical memory hot-remove, please let me
> know.

Since patchset is too big, could you add more patchset changelog to 
describe how this patchset works? in order that it is easier to review.

>
> How to test this patchset?
> 1. apply this patchset and build the kernel. MEMORY_HOTPLUG, MEMORY_HOTREMOVE,
>     ACPI_HOTPLUG_MEMORY must be selected.
> 2. load the module acpi_memhotplug
> 3. hotplug the memory device(it depends on your hardware)
>     You will see the memory device under the directory /sys/bus/acpi/devices/.
>     Its name is PNP0C80:XX.
> 4. online/offline pages provided by this memory device
>     You can write online/offline to /sys/devices/system/memory/memoryX/state to
>     online/offline pages provided by this memory device
> 5. hotremove the memory device
>     You can hotremove the memory device by the hardware, or writing 1 to
>     /sys/bus/acpi/devices/PNP0C80:XX/eject.
>
> Note: if the memory provided by the memory device is used by the kernel, it
> can't be offlined. It is not a bug.
>
> Known problems:
> 1. memory can't be offlined when CONFIG_MEMCG is selected.
>     For example: there is a memory device on node 1. The address range
>     is [1G, 1.5G). You will find 4 new directories memory8, memory9, memory10,
>     and memory11 under the directory /sys/devices/system/memory/.
>     If CONFIG_MEMCG is selected, we will allocate memory to store page cgroup
>     when we online pages. When we online memory8, the memory stored page cgroup
>     is not provided by this memory device. But when we online memory9, the memory
>     stored page cgroup may be provided by memory8. So we can't offline memory8
>     now. We should offline the memory in the reversed order.
>     When the memory device is hotremoved, we will auto offline memory provided
>     by this memory device. But we don't know which memory is onlined first, so
>     offlining memory may fail. In such case, you should offline the memory by
>     hand before hotremoving the memory device.
> 2. hotremoving memory device may cause kernel panicked
>     This bug will be fixed by Liu Jiang's patch:
>     https://lkml.org/lkml/2012/7/3/1
>
> change log of v9:
>   [RFC PATCH v9 8/21]
>     * add a lock to protect the list map_entries
>     * add an indicator to firmware_map_entry to remember whether the memory
>       is allocated from bootmem
>   [RFC PATCH v9 10/21]
>     * change the macro to inline function
>   [RFC PATCH v9 19/21]
>     * don't offline the node if the cpu on the node is onlined
>   [RFC PATCH v9 21/21]
>     * create new patch: auto offline page_cgroup when onlining memory block
>       failed
>
> change log of v8:
>   [RFC PATCH v8 17/20]
>     * Fix problems when one node's range include the other nodes
>   [RFC PATCH v8 18/20]
>     * fix building error when CONFIG_MEMORY_HOTPLUG_SPARSE or CONFIG_HUGETLBFS
>       is not defined.
>   [RFC PATCH v8 19/20]
>     * don't offline node when some memory sections are not removed
>   [RFC PATCH v8 20/20]
>     * create new patch: clear hwpoisoned flag when onlining pages
>
> change log of v7:
>   [RFC PATCH v7 4/19]
>     * do not continue if acpi_memory_device_remove_memory() fails.
>   [RFC PATCH v7 15/19]
>     * handle usemap in register_page_bootmem_info_section() too.
>
> change log of v6:
>   [RFC PATCH v6 12/19]
>     * fix building error on other archtitectures than x86
>
>   [RFC PATCH v6 15-16/19]
>     * fix building error on other archtitectures than x86
>
> change log of v5:
>   * merge the patchset to clear page table and the patchset to hot remove
>     memory(from ishimatsu) to one big patchset.
>
>   [RFC PATCH v5 1/19]
>     * rename remove_memory() to offline_memory()/offline_pages()
>
>   [RFC PATCH v5 2/19]
>     * new patch: implement offline_memory(). This function offlines pages,
>       update memory block's state, and notify the userspace that the memory
>       block's state is changed.
>
>   [RFC PATCH v5 4/19]
>     * offline and remove memory in acpi_memory_disable_device() too.
>
>   [RFC PATCH v5 17/19]
>     * new patch: add a new function __remove_zone() to revert the things done
>       in the function __add_zone().
>
>   [RFC PATCH v5 18/19]
>     * flush work befor reseting node device.
>
> change log of v4:
>   * remove "memory-hotplug : unify argument of firmware_map_add_early/hotplug"
>     from the patch series, since the patch is a bugfix. It is being disccussed
>     on other thread. But for testing the patch series, the patch is needed.
>     So I added the patch as [PATCH 0/13].
>
>   [RFC PATCH v4 2/13]
>     * check memory is online or not at remove_memory()
>     * add memory_add_physaddr_to_nid() to acpi_memory_device_remove() for
>       getting node id
>   
>   [RFC PATCH v4 3/13]
>     * create new patch : check memory is online or not at online_pages()
>
>   [RFC PATCH v4 4/13]
>     * add __ref section to remove_memory()
>     * call firmware_map_remove_entry() before remove_sysfs_fw_map_entry()
>
>   [RFC PATCH v4 11/13]
>     * rewrite register_page_bootmem_memmap() for removing page used as PT/PMD
>
> change log of v3:
>   * rebase to 3.5.0-rc6
>
>   [RFC PATCH v2 2/13]
>     * remove extra kobject_put()
>
>     * The patch was commented by Wen. Wen's comment is
>       "acpi_memory_device_remove() should ignore a return value of
>       remove_memory() since caller does not care the return value".
>       But I did not change it since I think caller should care the
>       return value. And I am trying to fix it as follow:
>
>       https://lkml.org/lkml/2012/7/5/624
>
>   [RFC PATCH v2 4/13]
>     * remove a firmware_memmap_entry allocated by kzmalloc()
>
> change log of v2:
>   [RFC PATCH v2 2/13]
>     * check whether memory block is offline or not before calling offline_memory()
>     * check whether section is valid or not in is_memblk_offline()
>     * call kobject_put() for each memory_block in is_memblk_offline()
>
>   [RFC PATCH v2 3/13]
>     * unify the end argument of firmware_map_add_early/hotplug
>
>   [RFC PATCH v2 4/13]
>     * add release_firmware_map_entry() for freeing firmware_map_entry
>
>   [RFC PATCH v2 6/13]
>    * add release_memory_block() for freeing memory_block
>
>   [RFC PATCH v2 11/13]
>    * fix wrong arguments of free_pages()
>
>
> Wen Congyang (8):
>    memory-hotplug: implement offline_memory()
>    memory-hotplug: store the node id in acpi_memory_device
>    memory-hotplug: export the function acpi_bus_remove()
>    memory-hotplug: call acpi_bus_remove() to remove memory device
>    memory-hotplug: introduce new function arch_remove_memory()
>    memory-hotplug: remove sysfs file of node
>    memory-hotplug: clear hwpoisoned flag when onlining pages
>    memory-hotplug: auto offline page_cgroup when onlining memory block
>      failed
>
> Yasuaki Ishimatsu (13):
>    memory-hotplug: rename remove_memory() to
>      offline_memory()/offline_pages()
>    memory-hotplug: offline and remove memory when removing the memory
>      device
>    memory-hotplug: check whether memory is present or not
>    memory-hotplug: remove /sys/firmware/memmap/X sysfs
>    memory-hotplug: does not release memory region in PAGES_PER_SECTION
>      chunks
>    memory-hotplug: add memory_block_release
>    memory-hotplug: remove_memory calls __remove_pages
>    memory-hotplug: check page type in get_page_bootmem
>    memory-hotplug: move register_page_bootmem_info_node and
>      put_page_bootmem for sparse-vmemmap
>    memory-hotplug: implement register_page_bootmem_info_section of
>      sparse-vmemmap
>    memory-hotplug: free memmap of sparse-vmemmap
>    memory_hotplug: clear zone when the memory is removed
>    memory-hotplug: add node_device_release
>
>   arch/ia64/mm/discontig.c                        |   14 +
>   arch/ia64/mm/init.c                             |   16 +
>   arch/powerpc/mm/init_64.c                       |   14 +
>   arch/powerpc/mm/mem.c                           |   14 +
>   arch/powerpc/platforms/pseries/hotplug-memory.c |   16 +-
>   arch/s390/mm/init.c                             |   12 +
>   arch/s390/mm/vmem.c                             |   14 +
>   arch/sh/mm/init.c                               |   15 +
>   arch/sparc/mm/init_64.c                         |   14 +
>   arch/tile/mm/init.c                             |    8 +
>   arch/x86/include/asm/pgtable_types.h            |    1 +
>   arch/x86/mm/init_32.c                           |   10 +
>   arch/x86/mm/init_64.c                           |  331 ++++++++++++++++++
>   arch/x86/mm/pageattr.c                          |   47 ++--
>   drivers/acpi/acpi_memhotplug.c                  |   54 +++-
>   drivers/acpi/scan.c                             |    3 +-
>   drivers/base/memory.c                           |   88 ++++-
>   drivers/base/node.c                             |   11 +
>   drivers/firmware/memmap.c                       |   98 +++++-
>   include/acpi/acpi_bus.h                         |    1 +
>   include/linux/firmware-map.h                    |    6 +
>   include/linux/memory.h                          |    5 +
>   include/linux/memory_hotplug.h                  |   25 +-
>   include/linux/mm.h                              |    5 +-
>   include/linux/mmzone.h                          |   19 +
>   mm/memory_hotplug.c                             |  424 +++++++++++++++++++++--
>   mm/page_cgroup.c                                |    3 +
>   mm/sparse.c                                     |    5 +-
>   28 files changed, 1181 insertions(+), 92 deletions(-)
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo at kvack.org.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont at kvack.org"> email at kvack.org </a>
>



More information about the Linuxppc-dev mailing list