[PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock

[Greg KH]

On Mon, Sep 24, 2012 at 02:44:19PM +0000, Liu Shengzhou-B36685 wrote:
> 
> > -----Original Message-----
> > From: Greg KH [mailto:greg at kroah.com]
> > Sent: 2012年9月22日 22:49
> > To: Kumar Gala
> > Cc: Liu Shengzhou-B36685; linuxppc-dev at lists.ozlabs.org; linux-
> > usb at vger.kernel.org
> > Subject: Re: [PATCH v3] powerpc/usb: fix bug of CPU hang when missing
> > USB PHY clock
> > 
> > On Sat, Sep 22, 2012 at 09:39:15AM -0500, Kumar Gala wrote:
> > >
> > > On Sep 21, 2012, at 11:43 AM, Greg KH wrote:
> > >
> > > > On Tue, Sep 18, 2012 at 04:52:39PM +0800, Shengzhou Liu wrote:
> > > >> when missing USB PHY clock, kernel booting up will hang during USB
> > > >> initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid
> > > >> CPU hanging in this case.
> > > >>
> > > >> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> > > >> ---
> > > >> v3 change: no check for UTMI PHY.
> > > >> v2 change: use spin_event_timeout() instead.
> > > >>
> > > >> drivers/usb/host/ehci-fsl.c |   57 +++++++++++++++++++++++++++++--
> > -----------
> > > >> drivers/usb/host/ehci-fsl.h |    1 +
> > > >> include/linux/fsl_devices.h |    1 +
> > > >> 3 files changed, 41 insertions(+), 18 deletions(-)
> > > >
> > > > This is already applied, right?
> > > >
> > > > greg k-h
> > >
> > > It appears that v2 of the patch is applied to your usb-next branch.
> > >
> > > in drivers/usb/host/ehci-fsl.c
> > >
> > > V2:
> > > @@ -262,23 +266,34 @@ static void ehci_fsl_setup_phy(struct usb_hcd
> > *hcd,
> > >         case FSL_USB2_PHY_NONE:
> > >                 break;
> > >         }
> > > +
> > > +       if ((pdata->controller_ver) && ((phy_mode ==
> > FSL_USB2_PHY_ULPI) ||
> > > +                       (phy_mode == FSL_USB2_PHY_UTMI))) {
> > >
> > > V3:
> > >
> > > @@ -262,23 +266,33 @@  static void ehci_fsl_setup_phy(struct usb_hcd
> > *hcd,
> > >
> > >  	case FSL_USB2_PHY_NONE:
> > >  		break;
> > >  	}
> > >
> > > +
> > > +	if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) {
> > > +		/* check PHY_CLK_VALID to get phy clk valid */
> > 
> > Ok, can someone please make the incremental patch that I need to apply
> > here and send it to me?
> > 
> > thanks,
> > 
> > greg k-h
> 
> Hi greg,
> 
> I have sent the below incremental patch to you, please squash it into the previous patch v2, which had been applied in your usb-next branch. 
> http://patchwork.ozlabs.org/patch/186443/

Given that this is a git tree, "squashing" patches does not work at all.
I'll just apply it as-is.

thanks,

greg k-h