PCI device not working

[Davide Viti]

Hi,
does the output I've included show anything wrong or should I post
something else to help identifying the cause of the problem?

thank you in advance,
Davide

2012/9/21 Davide Viti <zinosat at tiscali.it>

> I mean there are two controllers and both of them have a device
> "subtended" (both 0x1b65:0xabba).
> u-boot can see both devices, linux detects only the device attached to the
> first controller.
>
> Here's the output of lspci and /proc/iomem :
>
> root@(none):/# lspci -v
>
> 0000:00:00.0 Class 0604: Device 1957:0100 (rev 11)
>
>         Flags: bus master, fast devsel, latency 0
>
>         Memory at <ignored> (32-bit, non-prefetchable)
>
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>
>         I/O behind bridge: 00000000-00000fff
>
>         Memory behind bridge: a0000000-afffffff
>
>         Capabilities: [44] Power Management version 2
>
>         Capabilities: [4c] Express Root Port (Slot-), MSI 00
>
>         Capabilities: [100] Advanced Error Reporting
>
>
>
> 0000:01:00.0 Class 0280: Device 1b65:abba (rev 01)
>
>         Flags: bus master, fast devsel, latency 0, IRQ 16
>
>         Memory at a0000000 (32-bit, non-prefetchable) [size=1K]
>
>         Memory at a0010000 (32-bit, non-prefetchable) [size=64K]
>
>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>
>         Capabilities: [78] Power Management version 3
>
>         Capabilities: [80] Express Endpoint, MSI 00
>
>         Capabilities: [100] Virtual Channel <?>
>
>         Capabilities: [800] Advanced Error Reporting
>
>
>
> 0001:02:00.0 Class 0604: Device 1957:0100 (rev 11)
>
>         Flags: bus master, fast devsel, latency 0
>
>         Memory at <ignored> (32-bit, non-prefetchable)
>
>         Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>
>         I/O behind bridge: 00000000-00000fff
>
>         Memory behind bridge: b0000000-bfffffff
>
>         Capabilities: [44] Power Management version 2
>
>         Capabilities: [4c] Express Root Port (Slot-), MSI 00
>
>         Capabilities: [100] Advanced Error Reporting
>
>
> root@(none):/# cat /proc/iomem
>
> a0000000-afffffff : /pcie at ffe09000
>
>   a0000000-afffffff : PCI Bus 0000:01
>
>     a0000000-a00003ff : 0000:01:00.0
>
>     a0010000-a001ffff : 0000:01:00.0
>
> b0000000-bfffffff : /pcie at ffe0a000
>
>   b0000000-bfffffff : PCI Bus 0001:03
>
> ef000000-efffffff : ef000000.nor
>
> ffe04500-ffe04507 : serial
>
> ffe04600-ffe04607 : serial
>
>
> thanx for your help,
>
> Davide
>
>
> I mean that the kernel detects the first controller and the device
> attached to it, plus the second controller: the device on the second
> controller is not detected (same device as the one detected on the first
> controller)
>
> 2012/9/21 Kumar Gala <galak at kernel.crashing.org>
>
>>
>> On Sep 21, 2012, at 6:33 AM, Davide Viti wrote:
>>
>> > Hi,
>> > I'm working on a custom board based on P1020 with two (identical) PCI
>> devices attached;
>> > The work is derived from another board with a single instance of that
>> device.
>> > The system is based on u-boot-2009.11 and Linux 2.6.34.6
>> >
>> > The "pci" command on u-boot, shows me both the PCI controllers and
>> > the attached devices:
>> >
>> > Scanning PCI devices on bus 0
>> > BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
>> > _____________________________________________________________
>> > 00.00.00   0x1957     0x0100     Processor               0x20
>> >
>> > Scanning PCI devices on bus 1
>> > BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
>> > _____________________________________________________________
>> > 01.00.00   0x1b65     0xabba     Network controller      0x80
>> >
>> > Scanning PCI devices on bus 2
>> > BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
>> > _____________________________________________________________
>> > 02.00.00   0x1957     0x0100     Processor               0x20
>> >
>> > Scanning PCI devices on bus 3
>> > BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
>> > _____________________________________________________________
>> > 03.00.00   0x1b65     0xabba     Network controller      0x80
>> >
>> > The kernel detects only the first instance of the device.
>>
>> What do you mean by first instance of the device ?
>>
>> > Didn't get very far while looking at dts file and kernel logs, so I'm
>> > asking for some help on narrowing down the problem.
>> >
>> > I'm wondering if I can assume that the problem is restricted to
>> > kernel/dts and avoid concentrating on uboot.
>> > I can provide any log (didn't want to post tons of details on the first
>> > message)
>>
>> Probably a dts issue.
>>
>> What does lspci in linux say?
>>
>> - k
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20120924/1943cc8b/attachment-0001.html>