[PATCH] Powerpc 8xx CPM_UART maxidl should not depend on fifo size

[Christophe Leroy]

maxidl register was set to fifo size. There is no reason to set this
register to same value as fifo size. Setting it now to 0x10 by default
as in the UCC UART driver.

Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>

--- linux-3.5-vanilla/drivers/tty/serial/cpm_uart/cpm_uart_core.c	2012-07-21 22:58:29.000000000 +0200
+++ linux-3.5/drivers/tty/serial/cpm_uart/cpm_uart_core.c	2012-08-09 17:38:37.000000000 +0200
@@ -799,7 +799,7 @@
 	cpm_set_scc_fcr(sup);
 
 	out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
-	out_be16(&sup->scc_maxidl, pinfo->rx_fifosize);
+	out_be16(&sup->scc_maxidl, 0x10);
 	out_be16(&sup->scc_brkcr, 1);
 	out_be16(&sup->scc_parec, 0);
 	out_be16(&sup->scc_frmec, 0);
@@ -873,7 +873,7 @@
 
 	/* Using idle character time requires some additional tuning.  */
 	out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
-	out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
+	out_be16(&up->smc_maxidl, 0x10);
 	out_be16(&up->smc_brklen, 0);
 	out_be16(&up->smc_brkec, 0);
 	out_be16(&up->smc_brkcr, 1);