[PATCH] i2c-mpc: Wait for STOP to hit the bus

[Joakim Tjernlund]

Tabi Timur-B04825 <B04825 at freescale.com> wrote on 2012/09/02 04:48:01:
> On Thu, Aug 30, 2012 at 5:40 AM, Joakim Tjernlund
> <Joakim.Tjernlund at transmode.se> wrote:
>
> > -       mpc_i2c_stop(i2c);
> > +       mpc_i2c_stop(i2c); /* Initiate STOP */
> > +       orig_jiffies = jiffies;
> > +       /* Wait until STOP is seen, allow up to 1 s */
> > +       while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
> > +               if (time_after(jiffies, orig_jiffies + HZ)) {
> > +                       u8 status = readb(i2c->base + MPC_I2C_SR);
> > +
> > +                       dev_dbg(i2c->dev, "timeout\n");
> > +                       if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
> > +                               writeb(status & ~CSR_MAL,
> > +                                      i2c->base + MPC_I2C_SR);
> > +                               mpc_i2c_fixup(i2c);
> > +                       }
> > +                       return -EIO;
> > +               }
> > +               cond_resched();
> > +       }
>
> Shouldn't the while-loop be inside mpc_i2c_stop() itself?

Possibly but I choosed to do it this way as there is a similar loop in the beginning of mpc_xfer().
I figured it has better visibility if it is in the same function.

 Jocke