[PATCH 3/3 v3] iommu/fsl: Freescale PAMU driver and IOMMU API implementation.
Tabi Timur-B04825
B04825 at freescale.com
Tue Oct 23 08:18:07 EST 2012
On Wed, Oct 17, 2012 at 12:32 PM, Varun Sethi <Varun.Sethi at freescale.com> wrote:
> + * Copyright (C) 2012 Freescale Semiconductor, Inc.
Copyright 2012 Freescale Semiconductor, Inc.
> + *
> + */
> +
> +#include <linux/init.h>
> +#include <linux/iommu.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/mm.h>
> +#include <linux/interrupt.h>
> +#include <linux/device.h>
> +#include <linux/of_platform.h>
> +#include <linux/bootmem.h>
> +#include <linux/genalloc.h>
> +#include <asm/io.h>
> +#include <asm/bitops.h>
> +
> +#include "fsl_pamu.h"
> +
> +/* PAMU bypass enbale register contains control bits for
> + * enabling bypass mode on each PAMU.
> + */
/*
* Linux multi-line comments
* look like this.
*/
> +#define PAMUBYPENR 0x604
Update struct ccsr_guts instead.
http://patchwork.ozlabs.org/patch/141649/
> +
> +/* define indexes for each operation mapping scenario */
> +#define OMI_QMAN 0x00
> +#define OMI_FMAN 0x01
> +#define OMI_QMAN_PRIV 0x02
> +#define OMI_CAAM 0x03
> +
> +static paace_t *ppaact;
> +static paace_t *spaact;
> +static struct ome *omt;
> +unsigned int max_subwindow_count;
> +
> +struct gen_pool *spaace_pool;
> +
> +static paace_t *pamu_get_ppaace(int liodn)
> +{
> + if (!ppaact) {
> + pr_err("PPAACT doesn't exist\n");
pr_err("fsl-pamu: PPAACT has not been initialized\n");
Make sure ALL pr_xxx() messages in this file start with "fsl-pamu: "
> + return NULL;
> + }
> +
> + return &ppaact[liodn];
Bounds checking?
> +}
> +
> +/** Sets validation bit of PACCE
> + *
> + * @parm[in] liodn PAACT index for desired PAACE
> + *
> + * @return Returns 0 upon success else error code < 0 returned
> + */
> +int pamu_enable_liodn(int liodn)
> +{
> + paace_t *ppaace;
> +
> + ppaace = pamu_get_ppaace(liodn);
> + if (!ppaace)
> + return -ENOENT;
error message?
> +
> + if (!get_bf(ppaace->addr_bitfields, PPAACE_AF_WSE)) {
> + pr_err("liodn %d not configured\n", liodn);
> + return -EINVAL;
> + }
> +
> + /* Ensure that all other stores to the ppaace complete first */
> + mb();
> +
> + ppaace->addr_bitfields |= PAACE_V_VALID;
> + mb();
> +
> + return 0;
> +}
> +
> +/** Clears validation bit of PACCE
> + *
> + * @parm[in] liodn PAACT index for desired PAACE
> + *
> + * @return Returns 0 upon success else error code < 0 returned
This is not proper kerneldoc format.
> + */
> +int pamu_disable_liodn(int liodn)
> +{
> + paace_t *ppaace;
> +
> + ppaace = pamu_get_ppaace(liodn);
> + if (!ppaace)
> + return -ENOENT;
error message?
> +
> + set_bf(ppaace->addr_bitfields, PAACE_AF_V, PAACE_V_INVALID);
> + mb();
> +
> + return 0;
> +}
> +
> +
> +static unsigned int map_addrspace_size_to_wse(phys_addr_t addrspace_size)
> +{
> + BUG_ON((addrspace_size & (addrspace_size - 1)));
> +
> + /* window size is 2^(WSE+1) bytes */
> + return __ffs(addrspace_size >> PAMU_PAGE_SHIFT) + PAMU_PAGE_SHIFT - 1;
> +}
> +
> +static unsigned int map_subwindow_cnt_to_wce(u32 subwindow_cnt)
> +{
> + /* window count is 2^(WCE+1) bytes */
> + return __ffs(subwindow_cnt) - 1;
> +}
> +
> +static void pamu_setup_default_xfer_to_host_ppaace(paace_t *ppaace)
> +{
> + set_bf(ppaace->addr_bitfields, PAACE_AF_PT, PAACE_PT_PRIMARY);
> +
> + set_bf(ppaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
> + PAACE_M_COHERENCE_REQ);
> +}
> +
> +static void pamu_setup_default_xfer_to_host_spaace(paace_t *spaace)
> +{
> + set_bf(spaace->addr_bitfields, PAACE_AF_PT, PAACE_PT_SECONDARY);
> + set_bf(spaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
> + PAACE_M_COHERENCE_REQ);
> +}
> +
> +static paace_t *pamu_get_spaace(u32 fspi_index, u32 wnum)
> +{
> + return &spaact[fspi_index + wnum];
bounds checking?
> +}
> +
> +static unsigned long pamu_get_fspi_and_allocate(u32 subwin_cnt)
> +{
subwin_cnt should probably be an unsigned int.
This function needs to be documented. What value is being returned?
> + unsigned long spaace_addr;
> +
> + spaace_addr = gen_pool_alloc(spaace_pool, subwin_cnt * sizeof(paace_t));
> + if (!spaace_addr)
> + return ULONG_MAX;
What's wrong with returning 0 on error?
> +
> + return (spaace_addr - (unsigned long)spaact) / (sizeof(paace_t));
Is this supposed to be a virtual address? If so, then return void*
instead of an unsigned long.
> +}
> +
> +void pamu_free_subwins(int liodn)
> +{
> + paace_t *ppaace;
> + u32 subwin_cnt, size;
subwin_cnt should probably be an unsigned int.
> +
> + ppaace = pamu_get_ppaace(liodn);
> + if (!ppaace)
> + return;
error message
> +
> + if (get_bf(ppaace->addr_bitfields, PPAACE_AF_MW)) {
> + subwin_cnt = 1UL << (get_bf(ppaace->impl_attr, PAACE_IA_WCE) + 1);
> + size = (subwin_cnt - 1) * sizeof(paace_t);
> + gen_pool_free(spaace_pool, (unsigned long)&spaact[ppaace->fspi], size);
> + set_bf(ppaace->addr_bitfields, PPAACE_AF_MW, 0);
> + }
> +}
> +
> +/* Function used for updating stash destination for the coresspong LIODN.
> + */
> +int pamu_update_paace_stash(int liodn, u32 subwin, u32 value)
> +{
> + paace_t *paace;
> +
> + paace = pamu_get_ppaace(liodn);
> + if (!paace) {
> + return -ENOENT;
> + }
Error message?
> + if (subwin) {
> + paace = pamu_get_spaace(paace->fspi, subwin - 1);
> + if (!paace) {
> + return -ENOENT;
Error message?
> + }
> + }
> + set_bf(paace->impl_attr, PAACE_IA_CID, value);
> +
> + return 0;
> +}
> +
> +/** Sets up PPAACE entry for specified liodn
> + *
> + * @param[in] liodn Logical IO device number
> + * @param[in] win_addr starting address of DSA window
> + * @param[in] win-size size of DSA window
> + * @param[in] omi Operation mapping index -- if ~omi == 0 then omi not defined
> + * @param[in] rpn real (true physical) page number
> + * @param[in] stashid cache stash id for associated cpu -- if ~stashid == 0 then
> + * stashid not defined
> + * @param[in] snoopid snoop id for hardware coherency -- if ~snoopid == 0 then
> + * snoopid not defined
> + * @param[in] subwin_cnt number of sub-windows
> + * @param[in] prot window permissions
> + *
> + * @return Returns 0 upon success else error code < 0 returned
> + */
Please provide proper kerneldoc comments for all of the functions in this file.
> +int pamu_config_ppaace(int liodn, phys_addr_t win_addr, phys_addr_t win_size,
> + u32 omi, unsigned long rpn, u32 snoopid, u32 stashid,
> + u32 subwin_cnt, int prot)
> +{
> + paace_t *ppaace;
> + unsigned long fspi;
> +
> + if ((win_size & (win_size - 1)) || win_size < PAMU_PAGE_SIZE) {
> + pr_err("window size too small or not a power of two %llx\n", win_size);
> + return -EINVAL;
> + }
> +
> + if (win_addr & (win_size - 1)) {
> + pr_err("window address is not aligned with window size\n");
> + return -EINVAL;
> + }
> +
> + ppaace = pamu_get_ppaace(liodn);
> + if (!ppaace) {
> + return -ENOENT;
> + }
> +
> + /* window size is 2^(WSE+1) bytes */
> + set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE,
> + map_addrspace_size_to_wse(win_size));
> +
> + pamu_setup_default_xfer_to_host_ppaace(ppaace);
> +
> + ppaace->wbah = win_addr >> (PAMU_PAGE_SHIFT + 20);
> + set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL,
> + (win_addr >> PAMU_PAGE_SHIFT));
> +
> + /* set up operation mapping if it's configured */
> + if (omi < OME_NUMBER_ENTRIES) {
> + set_bf(ppaace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
> + ppaace->op_encode.index_ot.omi = omi;
> + } else if (~omi != 0) {
> + pr_err("bad operation mapping index: %d\n", omi);
> + return -EINVAL;
> + }
> +
> + /* configure stash id */
> + if (~stashid != 0)
> + set_bf(ppaace->impl_attr, PAACE_IA_CID, stashid);
> +
> + /* configure snoop id */
> + if (~snoopid != 0)
> + ppaace->domain_attr.to_host.snpid = snoopid;
> +
> + if (subwin_cnt) {
> + /* The first entry is in the primary PAACE instead */
> + fspi = pamu_get_fspi_and_allocate(subwin_cnt - 1);
> + if (fspi == ULONG_MAX) {
> + pr_err("spaace indexes exhausted\n");
> + return -EINVAL;
> + }
Indentation problem.
> +
> + /* window count is 2^(WCE+1) bytes */
> + set_bf(ppaace->impl_attr, PAACE_IA_WCE,
> + map_subwindow_cnt_to_wce(subwin_cnt));
> + set_bf(ppaace->addr_bitfields, PPAACE_AF_MW, 0x1);
> + ppaace->fspi = fspi;
> + } else {
> + set_bf(ppaace->impl_attr, PAACE_IA_ATM, PAACE_ATM_WINDOW_XLATE);
> + ppaace->twbah = rpn >> 20;
> + set_bf(ppaace->win_bitfields, PAACE_WIN_TWBAL, rpn);
> + set_bf(ppaace->addr_bitfields, PAACE_AF_AP, prot);
> + set_bf(ppaace->impl_attr, PAACE_IA_WCE, 0);
> + set_bf(ppaace->addr_bitfields, PPAACE_AF_MW, 0);
> + }
> + mb();
> +
> + return 0;
> +}
> +
> +/** Sets up SPAACE entry for specified subwindow
> + *
> + * @param[in] liodn Logical IO device number
> + * @param[in] subwin_cnt number of sub-windows associated with dma-window
> + * @param[in] subwin_addr starting address of subwindow
> + * @param[in] subwin_size size of subwindow
> + * @param[in] omi Operation mapping index
> + * @param[in] rpn real (true physical) page number
> + * @param[in] snoopid snoop id for hardware coherency -- if ~snoopid == 0 then
> + * snoopid not defined
> + * @param[in] stashid cache stash id for associated cpu
> + * @param[in] enable enable/disable subwindow after reconfiguration
> + * @param[in] prot sub window permissions
> + *
> + * @return Returns 0 upon success else error code < 0 returned
> + */
> +int pamu_config_spaace(int liodn, u32 subwin_cnt, u32 subwin_addr,
> + phys_addr_t subwin_size, u32 omi, unsigned long rpn,
> + u32 snoopid, u32 stashid, int enable, int prot)
> +{
> + paace_t *paace;
> + unsigned long fspi;
> +
> + /* setup sub-windows */
> + if (!subwin_cnt) {
> + pr_err("Invalid subwindow count\n");
> + return -EINVAL;
> + }
> +
> + paace = pamu_get_ppaace(liodn);
> + if (subwin_addr > 0 && paace) {
> + fspi = paace->fspi;
> + paace = pamu_get_spaace(fspi, subwin_addr - 1);
> +
> + if (paace && !(paace->addr_bitfields & PAACE_V_VALID)) {
> + pamu_setup_default_xfer_to_host_spaace(paace);
> + set_bf(paace->addr_bitfields, SPAACE_AF_LIODN, liodn);
> + }
> + }
> +
> + if (!paace)
> + return -ENOENT;
Error message?
> +
> + if (!enable && prot == PAACE_AP_PERMS_DENIED) {
> + if (subwin_addr > 0)
> + set_bf(paace->addr_bitfields, PAACE_AF_V,
> + PAACE_V_INVALID);
> + else
> + set_bf(paace->addr_bitfields, PAACE_AF_AP,
> + prot);
> + mb();
> + return 0;
> + }
> +
> + if (subwin_size & (subwin_size - 1) || subwin_size < PAMU_PAGE_SIZE) {
> + pr_err("subwindow size out of range, or not a power of 2\n");
> + return -EINVAL;
> + }
> +
> + if (rpn == ULONG_MAX) {
> + pr_err("real page number out of range\n");
> + return -EINVAL;
> + }
> +
> + /* window size is 2^(WSE+1) bytes */
> + set_bf(paace->win_bitfields, PAACE_WIN_SWSE,
> + map_addrspace_size_to_wse(subwin_size));
> +
> + set_bf(paace->impl_attr, PAACE_IA_ATM, PAACE_ATM_WINDOW_XLATE);
> + paace->twbah = rpn >> 20;
> + set_bf(paace->win_bitfields, PAACE_WIN_TWBAL, rpn);
> + set_bf(paace->addr_bitfields, PAACE_AF_AP, prot);
> +
> + /* configure snoop id */
> + if (~snoopid != 0)
> + paace->domain_attr.to_host.snpid = snoopid;
> +
> + /* set up operation mapping if it's configured */
> + if (omi < OME_NUMBER_ENTRIES) {
> + set_bf(paace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
> + paace->op_encode.index_ot.omi = omi;
> + } else if (~omi != 0) {
> + pr_err("bad operation mapping index: %d\n", omi);
> + return -EINVAL;
> + }
> +
> + if (~stashid != 0)
> + set_bf(paace->impl_attr, PAACE_IA_CID, stashid);
> +
> + smp_wmb();
> +
> + if (enable)
> + paace->addr_bitfields |= PAACE_V_VALID;
> +
> + mb();
> +
> + return 0;
> +}
> +
> +void get_ome_index(u32 *omi_index, struct device *dev)
> +{
> + if (of_device_is_compatible(dev->of_node, "fsl,qman-portal"))
> + *omi_index = OMI_QMAN;
> + if (of_device_is_compatible(dev->of_node, "fsl,qman"))
> + *omi_index = OMI_QMAN_PRIV;
> +}
Documentation?
> +
> +u32 get_stash_id(u32 stash_dest_hint, u32 vcpu)
Can we make the stash_id a signed integer, and return -1 as an error?
Making it a u32 is awkward because we keep doing stuff like this:
if (~stashid != 0)
and
return ~(u32)0;
> +{
> + const u32 *prop;
> + struct device_node *node;
> + u32 cache_level;
> + int len;
> +
> + /* Fastpath, exit early if L3/CPC cache is target for stashing */
> + if (stash_dest_hint == IOMMU_ATTR_CACHE_L3) {
> + node = of_find_compatible_node(NULL, NULL,
> + "fsl,p4080-l3-cache-controller");
> + if (node) {
if (!node) {
pr_err( "no cpc node" );
return ~(u32)0;
}
> + prop = of_get_property(node, "cache-stash-id", 0);
> + if (!prop) {
> + pr_err("missing cache-stash-id at %s\n", node->full_name);
> + of_node_put(node);
> + return ~(u32)0;
> + }
> + of_node_put(node);
> + return be32_to_cpup(prop);
> + }
> + return ~(u32)0;
> + }
> +
> + for_each_node_by_type(node, "cpu") {
> + prop = of_get_property(node, "reg", &len);
> + if (be32_to_cpup(prop) == vcpu)
> + break;
> + }
> +
> + /* find the hwnode that represents the cache */
> + for (cache_level = IOMMU_ATTR_CACHE_L1; cache_level <= IOMMU_ATTR_CACHE_L3; cache_level++) {
Shouldn't this be < IOMMU_ATTR_CACHE_L3, since we already handled the
CPC case above?
> + if (stash_dest_hint == cache_level) {
> + prop = of_get_property(node, "cache-stash-id", 0);
> + if (!prop) {
> + pr_err("missing cache-stash-id at %s\n", node->full_name);
> + of_node_put(node);
> + return ~(u32)0;
> + }
> + of_node_put(node);
> + return be32_to_cpup(prop);
> + }
> +
> + prop = of_get_property(node, "next-level-cache", 0);
> + if (!prop) {
> + pr_err("can't find next-level-cache at %s\n",
> + node->full_name);
> + of_node_put(node);
> + return ~(u32)0; /* can't traverse any further */
> + }
> + of_node_put(node);
> +
> + /* advance to next node in cache hierarchy */
> + node = of_find_node_by_phandle(*prop);
> + if (!node) {
> + pr_err("bad cpu reference %d\n", vcpu);
print the full path of any node that has a broken property
> + return ~(u32)0;
> + }
> + }
> +
> + pr_err("stash dest not found for %d on vcpu %d\n",
> + stash_dest_hint, vcpu);
> + return ~(u32)0;
> +}
> +
> +#define QMAN_PAACE 1
> +#define QMAN_PORTAL_PAACE 2
> +#define BMAN_PAACE 3
Documentation?
> +
> +static void setup_qbman_paace(paace_t *ppaace, int paace_type)
> +{
> + switch(paace_type) {
> + case QMAN_PAACE:
> + set_bf(ppaace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
> + ppaace->op_encode.index_ot.omi = OMI_QMAN_PRIV;
> + /* setup QMAN Private data stashing for the L3 cache */
> + set_bf(ppaace->impl_attr, PAACE_IA_CID, get_stash_id(IOMMU_ATTR_CACHE_L3, 0));
> + set_bf(ppaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
> + 0);
> + break;
> + case QMAN_PORTAL_PAACE:
> + set_bf(ppaace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
> + ppaace->op_encode.index_ot.omi = OMI_QMAN;
> + /*Set DQRR and Frame stashing for the L3 cache */
> + set_bf(ppaace->impl_attr, PAACE_IA_CID, get_stash_id(IOMMU_ATTR_CACHE_L3, 0));
> + break;
> + case BMAN_PAACE:
> + set_bf(ppaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
> + 0);
> + break;
> + }
> +}
Seriously, you need to document these functions.
> +
> +static void __init setup_omt(struct ome *omt)
> +{
> + struct ome *ome;
> +
> + /* Configure OMI_QMAN */
> + ome = &omt[OMI_QMAN];
> +
> + ome->moe[IOE_READ_IDX] = EOE_VALID | EOE_READ;
> + ome->moe[IOE_EREAD0_IDX] = EOE_VALID | EOE_RSA;
> + ome->moe[IOE_WRITE_IDX] = EOE_VALID | EOE_WRITE;
> + ome->moe[IOE_EWRITE0_IDX] = EOE_VALID | EOE_WWSAO;
> +
> + ome->moe[IOE_DIRECT0_IDX] = EOE_VALID | EOE_LDEC;
> + ome->moe[IOE_DIRECT1_IDX] = EOE_VALID | EOE_LDECPE;
> +
> + /* Configure OMI_FMAN */
> + ome = &omt[OMI_FMAN];
> + ome->moe[IOE_READ_IDX] = EOE_VALID | EOE_READI;
> + ome->moe[IOE_WRITE_IDX] = EOE_VALID | EOE_WRITE;
> +
> + /* Configure OMI_QMAN private */
> + ome = &omt[OMI_QMAN_PRIV];
> + ome->moe[IOE_READ_IDX] = EOE_VALID | EOE_READ;
> + ome->moe[IOE_WRITE_IDX] = EOE_VALID | EOE_WRITE;
> + ome->moe[IOE_EREAD0_IDX] = EOE_VALID | EOE_RSA;
> + ome->moe[IOE_EWRITE0_IDX] = EOE_VALID | EOE_WWSA;
> +
> + /* Configure OMI_CAAM */
> + ome = &omt[OMI_CAAM];
> + ome->moe[IOE_READ_IDX] = EOE_VALID | EOE_READI;
> + ome->moe[IOE_WRITE_IDX] = EOE_VALID | EOE_WRITE;
> +}
> +
> +int setup_one_pamu(unsigned long pamu_reg_base, unsigned long pamu_reg_size,
> + phys_addr_t ppaact_phys, phys_addr_t spaact_phys,
> + phys_addr_t omt_phys)
> +{
> + u32 *pc;
> + struct pamu_mmap_regs *pamu_regs;
> + u32 pc3_val;
> +
> + pc3_val = in_be32((u32 *)(pamu_reg_base + PAMU_PC3));
pamu_reg_base should be a void*. Or even better, create a struct.
> +
> +#define PAMU_PAGE_SHIFT 12
> +#define PAMU_PAGE_SIZE 4096ULL
4096ULL? Why not just 4096?
> +
> +/* This bitmap advertises the page sizes supported by PAMU hardware
> + * to the IOMMU API.
> + */
> +#define FSL_PAMU_PGSIZES (~0xFFFUL)
There should be a better way to define this. ~(PAMU_PAGE_SIZE-1) maybe?
> +
> +static int map_liodn(int liodn, struct fsl_dma_domain *dma_domain)
> +{
> + u32 subwin_cnt = dma_domain->subwin_cnt;
> + unsigned long rpn;
> + int ret = 0, i;
> +
> + if (subwin_cnt) {
> + struct dma_subwindow *sub_win_ptr =
> + &dma_domain->sub_win_arr[0];
> + for (i = 0; i < subwin_cnt; i++) {
> + if (sub_win_ptr[i].valid) {
> + rpn = sub_win_ptr[i].paddr >>
> + PAMU_PAGE_SHIFT,
> + spin_lock(&iommu_lock);
> + ret = pamu_config_spaace(liodn, subwin_cnt, i,
> + sub_win_ptr[i].size,
> + -1,
> + rpn,
> + dma_domain->snoop_id,
> + dma_domain->stash_id,
> + (i > 0) ? 1 : 0,
> + sub_win_ptr[i].prot);
> + spin_unlock(&iommu_lock);
> + if (ret) {
> + pr_err("PAMU SPAACE configuration failed for liodn %d\n",
> + liodn);
> + return ret;
> + }
> + }
> + }
> + } else {
> +
Blank line
> +
> +
> +static struct fsl_dma_domain *iommu_alloc_dma_domain(void)
> +{
> + struct fsl_dma_domain *domain;
> +
> + domain = kmem_cache_zalloc(fsl_pamu_domain_cache, GFP_KERNEL);
> + if (!domain)
> + return NULL;
> +
> + domain->stash_id = -1;
> + domain->snoop_id = -1;
Here, stash_id is set to -1, but in other places, you use ~0. Please
be consistent.
> +
> + INIT_LIST_HEAD(&domain->devices);
> +
> + spin_lock_init(&domain->domain_lock);
> +
> + return domain;
> +}
> +
> +static inline struct fsl_dma_domain *find_domain(struct device *dev)
> +{
> + return dev->archdata.iommu_domain;
> +}
> +
> +static void remove_domain_ref(struct device_domain_info *info, u32 subwin_cnt)
> +{
> + list_del(&info->link);
> + spin_lock(&iommu_lock);
> + if (subwin_cnt)
> + pamu_free_subwins(info->liodn);
> + pamu_disable_liodn(info->liodn);
> + spin_unlock(&iommu_lock);
> + spin_lock(&device_domain_lock);
> + info->dev->archdata.iommu_domain = NULL;
> + free_devinfo_mem(info);
> + spin_unlock(&device_domain_lock);
> +}
> +
> +static void destroy_domain(struct fsl_dma_domain *dma_domain)
> +{
> + struct device_domain_info *info;
> +
> + while (!list_empty(&dma_domain->devices)) {
> + info = list_entry(dma_domain->devices.next,
> + struct device_domain_info, link);
> + remove_domain_ref(info, dma_domain->subwin_cnt);
> + }
I wonder if you should use list_for_each_safe() instead.
> +
> +static int get_subwin_cnt(dma_addr_t geom_size, u32 subwin, u32 *subwin_cnt)
> +{
> +
blank line
> + switch (subwin) {
> + case 0:
> + /* We can't support geometry size > 1MB*/
> + if (geom_size != 1024 * 1024)
Instead of doing 1024*1024, use math that reflects the hardware
limitation of the PAMU: 256 * PAMU_PAGE_SIZE. Create a macro for 256,
like PAMU_MAX_SUBWINDOWS or something.
> + return 0;
> + *subwin_cnt = 256;
> + break;
> + case 1:
> + /* No subwindows only a single PAMU window */
> + *subwin_cnt = 0;
> + break;
> + default:
> + if (subwin > max_subwindow_count ||
> + (subwin & (subwin - 1)))
> + return 0;
> + *subwin_cnt = subwin;
> + }
> + return 1;
> +}
> +
> +static int configure_domain_geometry(struct iommu_domain *domain, void *data)
> +{
> + int ret = 0;
I don't think you need to initialize 'ret'
> +}
> +
> +static int configure_domain_dma_state(struct fsl_dma_domain *dma_domain, int enable)
bool enable
Finally, please CC: me on all IOMMU and PAMU patches you post upstream.
--
Timur Tabi
Linux kernel developer at Freescale
More information about the Linuxppc-dev
mailing list