[PATCH 1/9] powerpc: 83xx: use module_i2c_driver macro

[Devendra Naga]

replace the module init and exit calls containing the
i2c_add_driver and i2c_del_driver with the module_i2c_driver
macro as it does the same things as the code that is removed

Signed-off-by: Devendra Naga <devendra.aaru at gmail.com>
---

 Not compile tested, because i dont have a ppc cross toolchain
 arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c |   13 +------------
 1 files changed, 1 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
index ef6537b..d27477b 100644
--- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
+++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -232,18 +232,7 @@ static struct i2c_driver mcu_driver = {
 	.id_table = mcu_ids,
 };
 
-static int __init mcu_init(void)
-{
-	return i2c_add_driver(&mcu_driver);
-}
-module_init(mcu_init);
-
-static void __exit mcu_exit(void)
-{
-	i2c_del_driver(&mcu_driver);
-}
-module_exit(mcu_exit);
-
+module_i2c_driver(mcu_driver);
 MODULE_DESCRIPTION("Power Management and GPIO expander driver for "
 		   "MPC8349E-mITX-compatible MCU");
 MODULE_AUTHOR("Anton Vorontsov <avorontsov at ru.mvista.com>");
-- 
1.7.1