[PATCH 1/1] arch Kconfig: remove references to IRQ_PER_CPU

[James Hogan]

The IRQ_PER_CPU Kconfig symbol was removed in the following commit:

Commit 6a58fb3bad099076f36f0f30f44507bc3275cdb6 ("genirq: Remove
CONFIG_IRQ_PER_CPU") merged in v2.6.39-rc1.

But IRQ_PER_CPU wasn't removed from any of the architecture Kconfig
files where it was defined or selected. It's completely unused so remove
the remaining references.

Signed-off-by: James Hogan <james.hogan at imgtec.com>
Cc: Thomas Gleixner <tglx at linutronix.de>
Cc: Mike Frysinger <vapier at gentoo.org>
Cc: Richard Kuo <rkuo at codeaurora.org>
Cc: Tony Luck <tony.luck at intel.com>
Cc: Fenghua Yu <fenghua.yu at intel.com>
Cc: Ralf Baechle <ralf at linux-mips.org>
Cc: "James E.J. Bottomley" <jejb at parisc-linux.org>
Cc: Helge Deller <deller at gmx.de>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Cc: Paul Mackerras <paulus at samba.org>
Cc: Paul Mundt <lethal at linux-sh.org>
---
Based on v3.7-rc5.

Compile tested defconfigs for bfin, ia64, mips, parisc, powerpc, sh, but
not hexagon.

Grepped entire tree to check no references to CONFIG_IRQ_PER_CPU, and
grepped arch/ for Kconfig files referencing IRQ_PER_CPU.

 arch/blackfin/Kconfig |    1 -
 arch/hexagon/Kconfig  |    1 -
 arch/ia64/Kconfig     |    1 -
 arch/mips/Kconfig     |    1 -
 arch/parisc/Kconfig   |    1 -
 arch/powerpc/Kconfig  |    1 -
 arch/sh/Kconfig       |    3 ---
 7 files changed, 0 insertions(+), 9 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b6f3ad5..c709715 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -38,7 +38,6 @@ config BLACKFIN
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
-	select IRQ_PER_CPU if SMP
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
 	select GENERIC_SMP_IDLE_THREAD
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 0744f7d..800dd9c 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -12,7 +12,6 @@ config HEXAGON
 	# select ARCH_WANT_OPTIONAL_GPIOLIB
 	# select ARCH_REQUIRE_GPIOLIB
 	# select HAVE_CLK
-	# select IRQ_PER_CPU
 	# select GENERIC_PENDING_IRQ if SMP
 	select HAVE_IRQ_WORK
 	select GENERIC_ATOMIC64
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3279646..00c2e88 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -29,7 +29,6 @@ config IA64
 	select ARCH_DISCARD_MEMBLOCK
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
-	select IRQ_PER_CPU
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dba9390..d47de79 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2197,7 +2197,6 @@ source "mm/Kconfig"
 config SMP
 	bool "Multi-Processing support"
 	depends on SYS_SUPPORTS_SMP
-	select IRQ_PER_CPU
 	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 11def45..6d37987 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,7 +16,6 @@ config PARISC
 	select BROKEN_RODATA
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP
-	select IRQ_PER_CPU
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a902a5c..721dd7b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -125,7 +125,6 @@ config PPC
 	select HAVE_GENERIC_HARDIRQS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select SPARSE_IRQ
-	select IRQ_PER_CPU
 	select IRQ_DOMAIN
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index babc2b8..6f799ec 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -91,9 +91,6 @@ config GENERIC_CSUM
 config GENERIC_HWEIGHT
 	def_bool y
 
-config IRQ_PER_CPU
-	def_bool y
-
 config GENERIC_GPIO
 	def_bool n
 
-- 
1.7.7.6