[PATCH 1/2] powerpc/perf: Fix finding overflowed PMC in interrupt

[Michael Neuling]

If a PMC is about to overflow on a counter that's on an active perf event
(ie. less than 256 from the end) and a _different_ PMC overflows just at this
time (a PMC that's not on an active perf event), we currently mark the event as
found, but in reality it's not as it's likely the other PMC that caused the
IRQ.  Since we mark it as found the second catch all for overflows doesn't run,
and we don't reset the overflowing PMC ever.  Hence we keep hitting that same
PMC IRQ over and over and don't reset the actual overflowing counter.

This is a rewrite of the perf interrupt handler for book3s to get around this.
We now check to see if any of the PMCs have actually overflowed (ie >=
0x80000000).  If yes, record it for active counters and just reset it for
inactive counters.  If it's not overflowed, then we check to see if it's one of
the buggy power7 counters and if it is, record it and continue.  If none of the
PMCs match this, then we make note that we couldn't find the PMC that caused
the IRQ.

Signed-off-by: Michael Neuling <mikey at neuling.org>
Reviewed-by: Sukadev Bhattiprolu <sukadev at linux.vnet.ibm.com>
cc: Paul Mackerras <paulus at samba.org>
cc: Anton Blanchard <anton at samba.org>
cc: Linux PPC dev <linuxppc-dev at ozlabs.org>
---
 arch/powerpc/perf/core-book3s.c |   83 +++++++++++++++++++++++++--------------
 1 file changed, 54 insertions(+), 29 deletions(-)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index aa2465e..53fc7b8 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1412,11 +1412,8 @@ unsigned long perf_instruction_pointer(struct pt_regs *regs)
 		return regs->nip;
 }
 
-static bool pmc_overflow(unsigned long val)
+static bool pmc_overflow_power7(unsigned long val)
 {
-	if ((int)val < 0)
-		return true;
-
 	/*
 	 * Events on POWER7 can roll back if a speculative event doesn't
 	 * eventually complete. Unfortunately in some rare cases they will
@@ -1428,7 +1425,15 @@ static bool pmc_overflow(unsigned long val)
 	 * PMCs because a user might set a period of less than 256 and we
 	 * don't want to mistakenly reset them.
 	 */
-	if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256))
+	if ((0x80000000 - val) <= 256)
+		return true;
+
+	return false;
+}
+
+static bool pmc_overflow(unsigned long val)
+{
+	if ((int)val < 0)
 		return true;
 
 	return false;
@@ -1439,11 +1444,11 @@ static bool pmc_overflow(unsigned long val)
  */
 static void perf_event_interrupt(struct pt_regs *regs)
 {
-	int i;
+	int i, j;
 	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
 	struct perf_event *event;
-	unsigned long val;
-	int found = 0;
+	unsigned long val[8];
+	int found, active;
 	int nmi;
 
 	if (cpuhw->n_limited)
@@ -1458,33 +1463,53 @@ static void perf_event_interrupt(struct pt_regs *regs)
 	else
 		irq_enter();
 
-	for (i = 0; i < cpuhw->n_events; ++i) {
-		event = cpuhw->event[i];
-		if (!event->hw.idx || is_limited_pmc(event->hw.idx))
+	/* Read all the PMCs since we'll need them a bunch of times */
+	for (i = 0; i < ppmu->n_counter; ++i)
+		val[i] = read_pmc(i + 1);
+
+	/* Try to find what caused the IRQ */
+	found = 0;
+	for (i = 0; i < ppmu->n_counter; ++i) {
+		if (!pmc_overflow(val[i]))
 			continue;
-		val = read_pmc(event->hw.idx);
-		if ((int)val < 0) {
-			/* event has overflowed */
-			found = 1;
-			record_and_restart(event, val, regs);
+		if (is_limited_pmc(i + 1))
+			continue; /* these won't generate IRQs */
+		/*
+		 * We've found one that's overflowed.  For active
+		 * counters we need to log this.  For inactive
+		 * counters, we need to reset it anyway
+		 */
+		found = 1;
+		active = 0;
+		for (j = 0; j < cpuhw->n_events; ++j) {
+			event = cpuhw->event[j];
+			if (event->hw.idx == (i + 1)) {
+				active = 1;
+				record_and_restart(event, val[i], regs);
+				break;
+			}
 		}
+		if (!active)
+			/* reset non active counters that have overflowed */
+			write_pmc(i + 1, 0);
 	}
-
-	/*
-	 * In case we didn't find and reset the event that caused
-	 * the interrupt, scan all events and reset any that are
-	 * negative, to avoid getting continual interrupts.
-	 * Any that we processed in the previous loop will not be negative.
-	 */
-	if (!found) {
-		for (i = 0; i < ppmu->n_counter; ++i) {
-			if (is_limited_pmc(i + 1))
+	if (!found && pvr_version_is(PVR_POWER7)) {
+		/* check active counters for special buggy p7 overflow */
+		for (i = 0; i < cpuhw->n_events; ++i) {
+			event = cpuhw->event[i];
+			if (!event->hw.idx || is_limited_pmc(event->hw.idx))
 				continue;
-			val = read_pmc(i + 1);
-			if (pmc_overflow(val))
-				write_pmc(i + 1, 0);
+			if (pmc_overflow_power7(val[event->hw.idx - 1])) {
+				/* event has overflowed in a buggy way*/
+				found = 1;
+				record_and_restart(event,
+						   val[event->hw.idx - 1],
+						   regs);
+			}
 		}
 	}
+	if ((!found) && printk_ratelimit())
+		printk(KERN_WARNING "Can't find PMC that caused IRQ\n");
 
 	/*
 	 * Reset MMCR0 to its normal value.  This will set PMXE and
-- 
1.7.9.5