[PATCH 1/3] of: Add prefix parameter to of_modalias_node().

David Daney ddaney.cavm at gmail.com
Wed May 23 05:45:06 EST 2012


On 05/19/2012 11:08 PM, Grant Likely wrote:
> On Sat, 19 May 2012 23:54:36 -0600, Grant Likely<grant.likely at secretlab.ca>  wrote:
>> On Fri, 11 May 2012 15:05:21 -0700, David Daney<ddaney.cavm at gmail.com>  wrote:
>>> From: David Daney<david.daney at cavium.com>
>>>
>>> When generating MODALIASes, it is convenient to add things like "spi:"
>>> or "i2c:" to the front of the strings.  This allows the standard
>>> modprobe to find the right driver when automatically populating bus
>>> children from the device tree structure.
>>>
>>> Add a prefix parameter, and adjust callers.  For
>>> of_register_spi_devices() use the "spi:" prefix.
>>>
>>> Signed-off-by: David Daney<david.daney at cavium.com>
>>
>> Applied, thanks.  Some notes below...
>
> Wait... why is this necessary?

Because in of_register_spi_devices() in of_spi.c, you do:

	request_module(spi->modalias);

The string passed to request_module() must have the "spi:" prefix.


> The module type prefix isn't stored in
> the modalias value for any other bus type as far as I can see,

It is only useful with the prefix, so I though I would add it to the 
stored value.

> and
> with this series it appears that the "spi:" prefix may or may not be
> present in the modalias.  That doesn't look right.

Perhaps, but the with the combination of patches 1/3 and 2/3 I tried to 
ensure that the prefix would always be present for SPI devices.

>
> Why isn't prefixing spi: at uevent time sufficient?

Because udev may not be loading the driver.

> IIUC, modprobe
> depends on either UEVENT or the modalias attribute to know which
> driver to probe.  It does look like the attribute is missing the spi:
> prefix though.  Does the following change work instead of these two
> patches?
>

No.

> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index 3d8f662..da8aac7 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -51,7 +51,7 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
>   {
>          const struct spi_device *spi = to_spi_device(dev);
>
> -       return sprintf(buf, "%s\n", spi->modalias);
> +       return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
>   }
>
> So, I've dropped this patch from my tree.  If the change above works
> for you then I'll push it out.
>
> g.
>



More information about the Linuxppc-dev mailing list