[PATCH] powerpc/mpc52xx: setup port_config and CDM settings through DT

[Anatolij Gustschin]

On Mon, 19 Mar 2012 09:51:22 +0100
Anatolij Gustschin <agust at denx.de> wrote:

> From: Heiko Schocher <hs at denx.de>
> 
> If firmware does not setup the "GPS Port Configuration Register"
> and the "CDM 48MHz Fractional Divider Configuration Register",
> it can be corrected by additional properties in the device tree.
> Add appropriate code to utility functions and document used
> bindings.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> cc: devicetree-discuss at lists.ozlabs.org
> cc: linuxppc-dev at lists.ozlabs.org
> cc: Grant Likely <glikely at secretlab.ca>
> cc: Wolfgang Denk <wd at denx.de>
> Signed-off-by: Anatolij Gustschin <agust at denx.de>
> ---
>  .../devicetree/bindings/powerpc/fsl/mpc5200.txt    |   17 ++++++++++++
>  arch/powerpc/platforms/52xx/mpc52xx_common.c       |   27 ++++++++++++++++++++
>  2 files changed, 44 insertions(+), 0 deletions(-)

Applied for mpc5xxx next, thanks.

Anatolij