[PATCH][RFC] mpc52xx, common: setup port_config and cdm settings through DTS

[Anatolij Gustschin]

Hi Heiko,

On Tue, 19 Apr 2011 08:04:05 +0200
Heiko Schocher <hs at denx.de> wrote:

> If firmware does not setup the "GPS Port Configuration Register"
> and the "CDM 48MHz Fractional Divider Configuration Register",
> it can be corrected through DTS.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> cc: devictree-discuss at lists.ozlabs.org
> cc: linuxppc-dev at lists.ozlabs.org
> cc: Grant Likely <glikely at secretlab.ca>
> cc: Wolfgang Denk <wd at denx.de>
> ---
>  .../devicetree/bindings/powerpc/fsl/mpc5200.txt    |   16 +++++++++++
>  arch/powerpc/platforms/52xx/mpc52xx_common.c       |   27 ++++++++++++++++++++
>  2 files changed, 43 insertions(+), 0 deletions(-)

Applied slightly modified patch to mpc5xxx next.

Thanks,
Anatolij