[PATCH v3 4/4] powerpc: Board support for GE IMP3A

[Kumar Gala]

On Mar 12, 2012, at 12:13 PM, Martyn Welch wrote:

> Initial board support for the GE IMP3A, a 3U compactPCI card with a p2020
> processor.
> 
> Signed-off-by: Martyn Welch <martyn.welch at ge.com>
> ---
> 
> v2: Rebase patch onto powerpc/next, taking work by Kyle Moffett into
>    account.
> 
> v3: Correct detection of interrupt controller.
> 
> arch/powerpc/boot/dts/ge_imp3a.dts      |  255 ++++++++++++++++++++++++++++++
> arch/powerpc/configs/ge_imp3a_defconfig |  257 +++++++++++++++++++++++++++++++
> arch/powerpc/platforms/85xx/Kconfig     |   15 ++
> arch/powerpc/platforms/85xx/Makefile    |    1 +
> arch/powerpc/platforms/85xx/ge_imp3a.c  |  246 +++++++++++++++++++++++++++++
> drivers/gpio/gpio-ge.c                  |   28 ++++
> 6 files changed, 802 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/ge_imp3a.dts
> create mode 100644 arch/powerpc/configs/ge_imp3a_defconfig
> create mode 100644 arch/powerpc/platforms/85xx/ge_imp3a.c

applied, moved defconfig to configs/85xx/

- k