[PATCH 2/2 v5] powerpc/dts: Add dts for p1020rdb-pc board

[Kumar Gala]

On Feb 10, 2012, at 12:48 AM, Zhicheng Fan wrote:

> From: Zhicheng Fan <b32736 at freescale.com>
> 
> P1020RDB-PC Overview
> ------------------
> 1Gbyte DDR3 SDRAM
> 32 Mbyte NAND flash
> 10 16Mbyte NOR flash
> 16 Mbyte SPI flash
> SD connector to interface with the SD memory card
> Real-time clock on I2C bus
> 
> PCIe:
> - x1 PCIe slot
> - x1 mini-PCIe slot
> 
> 10/100/1000 BaseT Ethernet ports:
> - eTSEC1, RGMII: one 10/100/1000 port using VitesseTM VSC7385 L2 switch
> - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221
> - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021
> 
> USB 2.0 port:
> - Two USB2.0 Type A receptacles
> - One USB2.0 signal to Mini PCIe slot
> 
> Dual RJ45 UART ports:
> - DUART interface: supports two UARTs up to 115200 bps for console display
> 
> Signed-off-by: Zhicheng Fan <b32736 at freescale.com>
> ---
> arch/powerpc/boot/dts/p1020rdb-pc.dtsi           |  247 ++++++++++++++++++++++
> arch/powerpc/boot/dts/p1020rdb-pc_32b.dts        |   90 ++++++++
> arch/powerpc/boot/dts/p1020rdb-pc_36b.dts        |   90 ++++++++
> arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts |   64 ++++++
> arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts |  142 +++++++++++++
> 5 files changed, 633 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
> create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
> create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts
> create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts

applied

- k