[PATCH v3 1/4] powerpc: Add GE FPGA config option

Martyn Welch martyn.welch at ge.com
Tue Mar 13 04:12:57 EST 2012


This patch adds the GE_FPGA configuration option. This is being carried
out as ground work to allow the PIC and GPIO drivers to be move from the
powerpc 86xx platform directory to more general locations to allow them to
be used on non-86xx boards and to reduce churn when further boards using
these drivers are added.

Signed-off-by: Martyn Welch <martyn.welch at ge.com>
---

v3: Broken out from patch moving PIC and GPIO drivers

 arch/powerpc/platforms/86xx/Kconfig  |    7 +++++++
 arch/powerpc/platforms/86xx/Makefile |    7 ++++---
 drivers/watchdog/Kconfig             |    2 +-
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 8d6599d..abe2c4f 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -39,6 +39,7 @@ config GEF_PPC9A
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select GE_FPGA
 	help
 	  This option enables support for the GE PPC9A.
 
@@ -48,6 +49,7 @@ config GEF_SBC310
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select GE_FPGA
 	help
 	  This option enables support for the GE SBC310.
 
@@ -57,10 +59,15 @@ config GEF_SBC610
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select GE_FPGA
 	select HAS_RAPIDIO
 	help
 	  This option enables support for the GE SBC610.
 
+config GE_FPGA
+	bool
+	default n
+
 endif
 
 config MPC8641
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 4b0d7b1..ac6a50f 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
 gef-gpio-$(CONFIG_GPIOLIB)	+= gef_gpio.o
-obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o gef_pic.o $(gef-gpio-y)
-obj-$(CONFIG_GEF_SBC310)	+= gef_sbc310.o gef_pic.o $(gef-gpio-y)
-obj-$(CONFIG_GEF_PPC9A)		+= gef_ppc9a.o gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GE_FPGA)	+= gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o
+obj-$(CONFIG_GEF_SBC310)	+= gef_sbc310.o
+obj-$(CONFIG_GEF_PPC9A)		+= gef_ppc9a.o
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 877b107..2955c3f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1039,7 +1039,7 @@ config LANTIQ_WDT
 
 config GEF_WDT
 	tristate "GE Watchdog Timer"
-	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
+	depends on GE_FPGA
 	---help---
 	  Watchdog timer found in a number of GE single board computers.
 
-- 
1.7.0.4



More information about the Linuxppc-dev mailing list