[PATCH 13/38] KVM: PPC: booke: category E.HV (GS-mode) support

[tiejun.chen]

>> +	/*
>> +	 * Host interrupt handlers may have clobbered these guest-readable
>> +	 * SPRGs, so we need to reload them here with the guest's values.
>> +	 */
>> +	lwz	r3, VCPU_VRSAVE(r4)
>> +	lwz	r5, VCPU_SHARED_SPRG4(r11)
>> +	mtspr	SPRN_VRSAVE, r3
>> +	lwz	r6, VCPU_SHARED_SPRG5(r11)
>> +	mtspr	SPRN_SPRG4W, r5
>> +	lwz	r7, VCPU_SHARED_SPRG6(r11)
>> +	mtspr	SPRN_SPRG5W, r6
>> +	lwz	r8, VCPU_SHARED_SPRG7(r11)
>> +	mtspr	SPRN_SPRG6W, r7
>> +	mtspr	SPRN_SPRG7W, r8
>> +

That should be here.

>> +	/* Load some guest volatiles. */
>> +	PPC_LL	r3, VCPU_LR(r4)
>> +	PPC_LL	r5, VCPU_XER(r4)
>> +	PPC_LL	r6, VCPU_CTR(r4)
>> +	PPC_LL	r7, VCPU_CR(r4)
>> +	PPC_LL	r8, VCPU_PC(r4)
>> +#ifndef CONFIG_64BIT
>> +	lwz	r9, (VCPU_SHARED_MSR + 4)(r11)
>> +#else
>> +	ld	r9, (VCPU_SHARED_MSR)(r11)
>> +#endif
>> +	PPC_LL	r0, VCPU_GPR(r0)(r4)
>> +	PPC_LL	r1, VCPU_GPR(r1)(r4)
>> +	PPC_LL	r2, VCPU_GPR(r2)(r4)
>> +	PPC_LL	r10, VCPU_GPR(r10)(r4)
>> +	PPC_LL	r11, VCPU_GPR(r11)(r4)
>> +	PPC_LL	r12, VCPU_GPR(r12)(r4)
>> +	PPC_LL	r13, VCPU_GPR(r13)(r4)
>> +	mtlr	r3
>> +	mtxer	r5
>> +	mtctr	r6
>> +	mtcr	r7
>> +	mtsrr0	r8
>> +	mtsrr1	r9
>> +
>> +#ifdef CONFIG_KVM_EXIT_TIMING
>> +	/* save enter time */
>> +1:
>> +	mfspr	r6, SPRN_TBRU
>> +	mfspr	r7, SPRN_TBRL
>> +	mfspr	r8, SPRN_TBRU
>> +	cmpw	r8, r6
> 
> Is not we should save guest CR after this otherwise this can corrupt it?

I think this should be a typo since in our previous kvm implementation, we
always did collect kvm exit timing at the above location :)

Tiejun

> 
> Thanks
> -Bharat
> 
>> +	PPC_STL	r7, VCPU_TIMING_LAST_ENTER_TBL(r4)
>> +	bne	1b	
>> +	PPC_STL	r8, VCPU_TIMING_LAST_ENTER_TBU(r4)
>> +#endif
>> +
>> +	/* Finish loading guest volatiles and jump to guest. */
>> +	PPC_LL	r5, VCPU_GPR(r5)(r4)
>> +	PPC_LL	r6, VCPU_GPR(r6)(r4)
>> +	PPC_LL	r7, VCPU_GPR(r7)(r4)
>> +	PPC_LL	r8, VCPU_GPR(r8)(r4)	
>> +	PPC_LL	r9, VCPU_GPR(r9)(r4)
>> +
>> +	PPC_LL	r3, VCPU_GPR(r3)(r4)
>> +	PPC_LL	r4, VCPU_GPR(r4)(r4)
>> +	rfi