[PATCH v3 2/2] powerpc/44x: Add more changes for APM821XX EMAC driver

[Duc Dang]

 This patch includes:

  Configure EMAC PHY clock source (clock from PHY or internal clock).

  Do not advertise PHY half duplex capability as APM821XX EMAC does not support half duplex mode.

  Add changes to support configuring jumbo frame for APM821XX EMAC.

Signed-off-by: Duc Dang <dhdang at apm.com>
---
v3:
 Add parentheses for multi-line statements.
 Drop #if defined(CONFIG_APM821xx) in emac.h.

 drivers/net/ethernet/ibm/emac/core.c |   29 ++++++++++++++++++++++++++++-
 drivers/net/ethernet/ibm/emac/core.h |   13 +++++++++++--
 drivers/net/ethernet/ibm/emac/emac.h |    2 ++
 3 files changed, 41 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 2abce96..cc51842 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -434,6 +434,11 @@ static inline u32 emac_iff2rmr(struct net_device *ndev)
 	else if (!netdev_mc_empty(ndev))
 		r |= EMAC_RMR_MAE;
 
+	if (emac_has_feature(dev, EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE)) {
+		r &= ~EMAC4_RMR_MJS_MASK;
+		r |= EMAC4_RMR_MJS(ndev->mtu);
+	}
+
 	return r;
 }
 
@@ -965,6 +970,7 @@ static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu)
 	int rx_sync_size = emac_rx_sync_size(new_mtu);
 	int rx_skb_size = emac_rx_skb_size(new_mtu);
 	int i, ret = 0;
+	int mr1_jumbo_bit_change = 0;
 
 	mutex_lock(&dev->link_lock);
 	emac_netif_stop(dev);
@@ -1013,7 +1019,15 @@ static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu)
 	}
  skip:
 	/* Check if we need to change "Jumbo" bit in MR1 */
-	if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
+	if (emac_has_feature(dev, EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE)) {
+		mr1_jumbo_bit_change = (new_mtu > ETH_DATA_LEN) ||
+				(dev->ndev->mtu > ETH_DATA_LEN);
+	} else {
+		mr1_jumbo_bit_change = (new_mtu > ETH_DATA_LEN) ^
+				(dev->ndev->mtu > ETH_DATA_LEN);
+	}
+
+	if (mr1_jumbo_bit_change) {
 		/* This is to prevent starting RX channel in emac_rx_enable() */
 		set_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags);
 
@@ -2471,6 +2485,7 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
 
 	/* Disable any PHY features not supported by the platform */
 	dev->phy.def->features &= ~dev->phy_feat_exc;
+	dev->phy.features &= ~dev->phy_feat_exc;
 
 	/* Setup initial link parameters */
 	if (dev->phy.features & SUPPORTED_Autoneg) {
@@ -2568,6 +2583,11 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 		if (of_device_is_compatible(np, "ibm,emac-405ex") ||
 		    of_device_is_compatible(np, "ibm,emac-405exr"))
 			dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
+		if (of_device_is_compatible(np, "ibm,emac-apm821xx")) {
+			dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
+					EMAC_FTR_APM821XX_NO_HALF_DUPLEX |
+					EMAC_FTR_460EX_PHY_CLK_FIX);
+		}
 	} else if (of_device_is_compatible(np, "ibm,emac4")) {
 		dev->features |= EMAC_FTR_EMAC4;
 		if (of_device_is_compatible(np, "ibm,emac-440gx"))
@@ -2818,6 +2838,13 @@ static int __devinit emac_probe(struct platform_device *ofdev)
 	dev->stop_timeout = STOP_TIMEOUT_100;
 	INIT_DELAYED_WORK(&dev->link_work, emac_link_timer);
 
+	/* Some SoCs like APM821xx does not support Half Duplex mode. */
+	if (emac_has_feature(dev, EMAC_FTR_APM821XX_NO_HALF_DUPLEX)) {
+		dev->phy_feat_exc = (SUPPORTED_1000baseT_Half |
+					SUPPORTED_100baseT_Half |
+					SUPPORTED_10baseT_Half);
+	}
+	
 	/* Find PHY if any */
 	err = emac_init_phy(dev);
 	if (err != 0)
diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h
index fa3ec57..9dea85a 100644
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -325,7 +325,14 @@ struct emac_instance {
  * Set if we need phy clock workaround for 460ex or 460gt
  */
 #define EMAC_FTR_460EX_PHY_CLK_FIX	0x00000400
-
+/*
+ * APM821xx requires Jumbo frame size set explicitly
+ */
+#define EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE	0x00000800
+/*
+ * APM821xx does not support Half Duplex mode
+ */
+#define EMAC_FTR_APM821XX_NO_HALF_DUPLEX	0x00001000
 
 /* Right now, we don't quite handle the always/possible masks on the
  * most optimal way as we don't have a way to say something like
@@ -353,7 +360,9 @@ enum {
 	    EMAC_FTR_NO_FLOW_CONTROL_40x |
 #endif
 	EMAC_FTR_460EX_PHY_CLK_FIX |
-	EMAC_FTR_440EP_PHY_CLK_FIX,
+	EMAC_FTR_440EP_PHY_CLK_FIX |
+	EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
+	EMAC_FTR_APM821XX_NO_HALF_DUPLEX,
 };
 
 static inline int emac_has_feature(struct emac_instance *dev,
diff --git a/drivers/net/ethernet/ibm/emac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h
index 1568278..c9090a4 100644
--- a/drivers/net/ethernet/ibm/emac/emac.h
+++ b/drivers/net/ethernet/ibm/emac/emac.h
@@ -212,6 +212,8 @@ struct emac_regs {
 #define EMAC4_RMR_RFAF_64_1024		0x00000006
 #define EMAC4_RMR_RFAF_128_2048		0x00000007
 #define EMAC4_RMR_BASE			EMAC4_RMR_RFAF_128_2048
+#define EMAC4_RMR_MJS_MASK              0x0001fff8
+#define EMAC4_RMR_MJS(s)                (((s) << 3) & EMAC4_RMR_MJS_MASK)
 
 /* EMACx_ISR & EMACx_ISER */
 #define EMAC4_ISR_TXPE			0x20000000
-- 
1.7.5.4