[PATCH 2/2] powerpc/44x: Add more changes for APM821XX EMAC driver

[David Miller]

From: Josh Boyer <jwboyer at gmail.com>
Date: Wed, 29 Feb 2012 08:43:46 -0500

> On Fri, Feb 17, 2012 at 3:07 AM, Duc Dang <dhdang at apm.com> wrote:
>> This patch includes:
>>
>>  Configure EMAC PHY clock source (clock from PHY or internal clock).
>>
>>  Do not advertise PHY half duplex capability as APM821XX EMAC does not
>> support half duplex mode.
>>
>>  Add changes to support configuring jumbo frame for APM821XX EMAC.
>>
>> Signed-off-by: Duc Dang <dhdang at apm.com>
> 
> This should have been sent to netdev.  CC'ing them now.
> 
> Ben and David, I can take this change through the 4xx tree if it looks OK to
> both of you.  The pre-requisite DTS patch will go through my tree, so it might
> make sense to keep them together.

Well the patch has coding style problems, for one:

>> +			dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE
>> +					| EMAC_FTR_APM821XX_NO_HALF_DUPLEX
>> +					| EMAC_FTR_460EX_PHY_CLK_FIX);

Should be:

>> +			dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
>> +					  EMAC_FTR_APM821XX_NO_HALF_DUPLEX |
>> +					  EMAC_FTR_460EX_PHY_CLK_FIX);

And this:

>> +		dev->phy_feat_exc = (SUPPORTED_1000baseT_Half
>> +					| SUPPORTED_100baseT_Half
>> +					| SUPPORTED_10baseT_Half);

Should be:

>> +		dev->phy_feat_exc = (SUPPORTED_1000baseT_Half |
>> +				     SUPPORTED_100baseT_Half |
>> +				     SUPPORTED_10baseT_Half);