[PATCH 4/4] powerpc: IOMMU fault injection
Anton Blanchard
anton at samba.org
Mon Jun 25 14:26:17 EST 2012
Add the ability to inject IOMMU faults. We enable this per device
via a fail_iommu sysfs property, similar to fault injection on other
subsystems.
An example:
# lspci
...
0003:01:00.1 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 02)
To inject one error to this device:
echo 1 > /sys/bus/pci/devices/0003:01:00.1/fail_iommu
echo 1 > /sys/kernel/debug/fail_iommu/probability
echo 1 > /sys/kernel/debug/fail_iommu/times
As feared, the first failure injected on the be3 results in an
unrecoverable error, taking down both functions of the card
permanently:
be2net 0003:01:00.1: Unrecoverable error in the card
Signed-off-by: Anton Blanchard <anton at samba.org>
---
Index: linux-build/arch/powerpc/kernel/iommu.c
===================================================================
--- linux-build.orig/arch/powerpc/kernel/iommu.c 2012-06-08 09:01:02.785709100 +1000
+++ linux-build/arch/powerpc/kernel/iommu.c 2012-06-08 09:01:07.489784856 +1000
@@ -33,7 +33,9 @@
#include <linux/bitmap.h>
#include <linux/iommu-helper.h>
#include <linux/crash_dump.h>
+#include <linux/fault-inject.h>
#include <asm/io.h>
+#include <asm/vio.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
@@ -58,6 +60,94 @@ static int __init setup_iommu(char *str)
__setup("iommu=", setup_iommu);
+#ifdef CONFIG_FAIL_IOMMU
+
+static DECLARE_FAULT_ATTR(fail_iommu);
+
+static int __init setup_fail_iommu(char *str)
+{
+ return setup_fault_attr(&fail_iommu, str);
+}
+__setup("fail_iommu=", setup_fail_iommu);
+
+static bool should_fail_iommu(struct device *dev)
+{
+ return dev->archdata.fail_iommu && should_fail(&fail_iommu, 1);
+}
+
+static int __init fail_iommu_debugfs(void)
+{
+ struct dentry *dir = fault_create_debugfs_attr("fail_iommu",
+ NULL, &fail_iommu);
+
+ return IS_ERR(dir) ? PTR_ERR(dir) : 0;
+}
+late_initcall(fail_iommu_debugfs);
+
+static ssize_t fail_iommu_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", dev->archdata.fail_iommu);
+}
+
+static ssize_t fail_iommu_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ int i;
+
+ if (count > 0 && sscanf(buf, "%d", &i) > 0)
+ dev->archdata.fail_iommu = (i == 0) ? 0 : 1;
+
+ return count;
+}
+
+static DEVICE_ATTR(fail_iommu, S_IRUGO|S_IWUSR, fail_iommu_show,
+ fail_iommu_store);
+
+static int fail_iommu_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+
+ if (action == BUS_NOTIFY_ADD_DEVICE) {
+ if (device_create_file(dev, &dev_attr_fail_iommu))
+ pr_warn("Unable to create IOMMU fault injection sysfs "
+ "entries\n");
+ } else if (action == BUS_NOTIFY_DEL_DEVICE) {
+ device_remove_file(dev, &dev_attr_fail_iommu);
+ }
+
+ return 0;
+}
+
+static struct notifier_block fail_iommu_bus_notifier = {
+ .notifier_call = fail_iommu_bus_notify
+};
+
+static int __init fail_iommu_setup(void)
+{
+#ifdef CONFIG_PCI
+ bus_register_notifier(&pci_bus_type, &fail_iommu_bus_notifier);
+#endif
+#ifdef CONFIG_IBMVIO
+ bus_register_notifier(&vio_bus_type, &fail_iommu_bus_notifier);
+#endif
+
+ return 0;
+}
+/*
+ * Must execute after PCI and VIO subsystem have initialised but before
+ * devices are probed.
+ */
+arch_initcall(fail_iommu_setup);
+#else
+static inline bool should_fail_iommu(struct device *dev)
+{
+ return false;
+}
+#endif
+
static unsigned long iommu_range_alloc(struct device *dev,
struct iommu_table *tbl,
unsigned long npages,
@@ -83,6 +173,9 @@ static unsigned long iommu_range_alloc(s
return DMA_ERROR_CODE;
}
+ if (should_fail_iommu(dev))
+ return DMA_ERROR_CODE;
+
if (handle && *handle)
start = *handle;
else
Index: linux-build/arch/powerpc/include/asm/device.h
===================================================================
--- linux-build.orig/arch/powerpc/include/asm/device.h 2012-06-08 09:01:02.765708778 +1000
+++ linux-build/arch/powerpc/include/asm/device.h 2012-06-08 09:01:07.489784856 +1000
@@ -34,6 +34,9 @@ struct dev_archdata {
#ifdef CONFIG_EEH
struct eeh_dev *edev;
#endif
+#ifdef CONFIG_FAIL_IOMMU
+ int fail_iommu;
+#endif
};
struct pdev_archdata {
Index: linux-build/arch/powerpc/Kconfig.debug
===================================================================
--- linux-build.orig/arch/powerpc/Kconfig.debug 2012-06-08 09:01:02.753708585 +1000
+++ linux-build/arch/powerpc/Kconfig.debug 2012-06-08 09:01:07.489784856 +1000
@@ -331,4 +331,13 @@ config STRICT_DEVMEM
If you are unsure, say Y.
+config FAIL_IOMMU
+ bool "Fault-injection capability for IOMMU"
+ depends on FAULT_INJECTION
+ help
+ Provide fault-injection capability for IOMMU. Each device can
+ be selectively enabled via the fail_iommu property.
+
+ If you are unsure, say N.
+
endmenu
More information about the Linuxppc-dev
mailing list