[PATCH v5 4/5] fsl_pmc: Add API to enable device as wakeup event source

Scott Wood scottwood at freescale.com
Tue Jun 5 09:02:35 EST 2012


On 06/04/2012 06:36 AM, Zhao Chenhui wrote:
> On Fri, Jun 01, 2012 at 05:08:52PM -0500, Scott Wood wrote:
>> On 05/11/2012 06:53 AM, Zhao Chenhui wrote:
>>> Add APIs for setting wakeup source and lossless Ethernet in low power modes.
>>> These APIs can be used by wake-on-packet feature.
>>>
>>> Signed-off-by: Dave Liu <daveliu at freescale.com>
>>> Signed-off-by: Li Yang <leoli at freescale.com>
>>> Signed-off-by: Jin Qing <b24347 at freescale.com>
>>> Signed-off-by: Zhao Chenhui <chenhui.zhao at freescale.com>
>>> ---
>>>  arch/powerpc/sysdev/fsl_pmc.c |   71 ++++++++++++++++++++++++++++++++++++++++-
>>>  arch/powerpc/sysdev/fsl_soc.h |    9 +++++
>>>  2 files changed, 79 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
>>> index 1dc6e9e..c1170f7 100644
>>> --- a/arch/powerpc/sysdev/fsl_pmc.c
>>> +++ b/arch/powerpc/sysdev/fsl_pmc.c
>>> @@ -34,6 +34,7 @@ struct pmc_regs {
>>>  	__be32 powmgtcsr;
>>>  #define POWMGTCSR_SLP		0x00020000
>>>  #define POWMGTCSR_DPSLP		0x00100000
>>> +#define POWMGTCSR_LOSSLESS	0x00400000
>>>  	__be32 res3[2];
>>>  	__be32 pmcdr;
>>>  };
>>> @@ -43,6 +44,74 @@ static unsigned int pmc_flag;
>>>  
>>>  #define PMC_SLEEP	0x1
>>>  #define PMC_DEEP_SLEEP	0x2
>>> +#define PMC_LOSSLESS	0x4
>>> +
>>> +/**
>>> + * mpc85xx_pmc_set_wake - enable devices as wakeup event source
>>> + * @pdev: platform device affected
>>> + * @enable: True to enable event generation; false to disable
>>> + *
>>> + * This enables the device as a wakeup event source, or disables it.
>>> + *
>>> + * RETURN VALUE:
>>> + * 0 is returned on success
>>> + * -EINVAL is returned if device is not supposed to wake up the system
>>> + * Error code depending on the platform is returned if both the platform and
>>> + * the native mechanism fail to enable the generation of wake-up events
>>> + */
>>> +int mpc85xx_pmc_set_wake(struct platform_device *pdev, bool enable)
>>
>> Why does it have to be a platform_device?  Would a bare device_node work
>> here?  If it's for stuff like device_may_wakeup() that could be in a
>> platform_device wrapper function.
> 
> It does not have to be a platform_device. I think it can be a struct device.

Why does it even need that?  The low level mechanism for influencing
PMCDR should only need a device node, not a Linux device struct.

>> Where does this get called from?  I don't see an example user in this
>> patchset.
> 
> It will be used by a gianfar related patch. I plan to submit that patch
> after these patches accepted.

It would be nice to see how this is used when reviewing this.

>>> +{
>>> +	int ret = 0;
>>> +	struct device_node *clk_np;
>>> +	u32 *prop;
>>> +	u32 pmcdr_mask;
>>> +
>>> +	if (!pmc_regs) {
>>> +		pr_err("%s: PMC is unavailable\n", __func__);
>>> +		return -ENODEV;
>>> +	}
>>> +
>>> +	if (enable && !device_may_wakeup(&pdev->dev))
>>> +		return -EINVAL;
>>
>> Who is setting can_wakeup for these devices?
> 
> The device driver is responsible to set can_wakeup.

How would the device driver know how to set it?  Wouldn't this depend on
the particular SoC and low power mode?

-Scott



More information about the Linuxppc-dev mailing list