Errors related to i2c-powermac on the G4
Andrey Gusev
ronne at list.ru
Sat Jul 21 00:46:29 EST 2012
Hi!
I build kernel from git and can see errors in dmesg on boot. 3.4.5
doesn't have such issue.
git show | head -n2
commit 85efc72a0218335324d358ac479a04c16316fd4d
Merge: 3e4b945 6a3ca4f
dmesg:
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at
cfc00000)
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-rc7+ (andrey at power-debian) (gcc
version 4.6.3 (Debian 4.6.3-8) ) #2 SMP PREEMPT Fri Jul 20 18:04:08 MSK 2012
[ 0.000000] Found initrd at 0xc1300000:0xc16f8000
[ 0.000000] Found UniNorth memory controller & host bridge @
0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at
0xff740000
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci at f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff ->
0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff ->
0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000afffffff ->
0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci at f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff ->
0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff ->
0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff ->
0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000.
Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci at f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff ->
0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff ->
0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1492, gen1=1493
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x2fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x30000000-0x5fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x5fffffff]
[ 0.000000] On node 0 totalpages: 393216
[ 0.000000] free_area_init_node: node 0, pgdat c0567ca0, node_mem_map
c05c2000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1536 pages used for memmap
[ 0.000000] HighMem zone: 195072 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c11cd000 s7072 r8192 d13408
u32768
[ 0.000000] pcpu-alloc: s7072 r8192 d13408 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 390144
[ 0.000000] Kernel command line: root=/dev/mapper/power--group-root
ro nouveau.modeset=0 libata.force=2:pio4 drm.debug=0x04
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] High memory: 786432k
[ 0.000000] Memory: 1545224k/1572864k available (5392k kernel code,
27640k reserved, 204k data, 244k bss, 236k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdcda000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdcda000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:128 nr_irqs:128 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at
80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 240 minutes, DST: on
[ 0.000000] time_init: decrementer frequency = 33.304672 MHz
[ 0.000000] time_init: processor frequency = 866.666664 MHz
[ 0.000000] clocksource: timebase mult[1e069bf8] shift[24] registered
[ 0.000000] clockevent: decrementer mult[886a7ad] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.001299] pid_max: default: 32768 minimum: 301
[ 0.001485] Mount-cache hash table entries: 512
[ 0.002003] device-tree: Duplicate name in
/cpus/PowerPC,G4 at 0/l2-cache, renamed to "l2-cache#1"
[ 0.002103] device-tree: Duplicate name in /cpus/PowerPC,G4 at 0,
renamed to "l2-cache#1"
[ 0.002239] device-tree: Duplicate name in
/cpus/PowerPC,G4 at 1/l2-cache, renamed to "l2-cache#1"
[ 0.002335] device-tree: Duplicate name in /cpus/PowerPC,G4 at 1,
renamed to "l2-cache#1"
[ 0.005927] Initializing cgroup subsys freezer
[ 0.006500] PowerMac SMP probe found 2 cpus
[ 0.006621] KeyWest i2c @0xf8001003 irq 42 /uni-n at f8000000/i2c at f8001000
[ 0.006642] channel 0 bus <multibus>
[ 0.006654] channel 1 bus <multibus>
[ 0.006699] KeyWest i2c @0x80018000 irq 26
/pci at f2000000/mac-io at 17/i2c at 18000
[ 0.006717] channel 0 bus <multibus>
[ 0.006734] PMU i2c /pci at f2000000/mac-io at 17/via-pmu at 16000/pmu-i2c
[ 0.006750] channel 1 bus <multibus>
[ 0.006762] channel 2 bus <multibus>
[ 0.006783] pmf: no parser for command 17 !
[ 0.006826] Processor timebase sync using GPIO 0x73
[ 0.006840] mpic: requesting IPIs...
[ 0.006922] CPU0: L2CR is 80080000
[ 0.006939] CPU0: L3CR is 8f0b0000
[ 0.006956] MPC7450 family performance monitor hardware support
registered
[476246925.023023] CPU1: L2CR was 80000
[476246925.023054] CPU1: L2CR set to 80080000
[476246925.023057] CPU1: L3CR was 0
[476246925.023215] CPU1: L3CR set to 8f0b0000
[ 0.018176] Brought up 2 CPUs
[ 0.019123] NET: Registered protocol family 16
[ 0.021924] PCI: Probing PCI hardware
[ 0.022130] PCI host bridge to bus 0000:00
[ 0.022162] pci_bus 0000:00: root bus resource [io
0x802000-0x1001fff] (bus address [0x0000-0x7fffff])
[ 0.022193] pci_bus 0000:00: root bus resource [mem
0xf1000000-0xf1ffffff]
[ 0.022215] pci_bus 0000:00: root bus resource [mem
0x90000000-0xafffffff]
[ 0.022290] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
[ 0.022396] pci 0000:00:10.0: [10de:0172] type 00 class 0x030000
[ 0.022421] pci 0000:00:10.0: reg 10: [mem 0x91000000-0x91ffffff]
[ 0.022436] pci 0000:00:10.0: reg 14: [mem 0x98000000-0x9fffffff pref]
[ 0.022451] pci 0000:00:10.0: reg 18: [mem 0x00000000-0x0007ffff pref]
[ 0.022484] pci 0000:00:10.0: reg 30: [mem 0x90000000-0x9001ffff pref]
[ 0.023104] PCI host bridge to bus 0001:10
[ 0.023133] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
[ 0.023155] pci_bus 0001:10: root bus resource [mem
0xf3000000-0xf3ffffff]
[ 0.023177] pci_bus 0001:10: root bus resource [mem
0x80000000-0x8fffffff]
[ 0.023231] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
[ 0.023318] pci 0001:10:15.0: [12eb:0002] type 00 class 0x040100
[ 0.023341] pci 0001:10:15.0: reg 10: [mem 0x800c0000-0x800fffff]
[ 0.023356] pci 0001:10:15.0: reg 14: [io 0x0410-0x0417]
[ 0.023371] pci 0001:10:15.0: reg 18: [io 0x0400-0x0407]
[ 0.023427] pci 0001:10:15.0: supports D2
[ 0.023454] pci 0001:10:17.0: [106b:0022] type 00 class 0xff0000
[ 0.023472] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff]
[ 0.023546] pci 0001:10:18.0: [106b:0019] type 00 class 0x0c0310
[ 0.023565] pci 0001:10:18.0: reg 10: [mem 0x80081000-0x80081fff]
[ 0.023639] pci 0001:10:19.0: [106b:0019] type 00 class 0x0c0310
[ 0.023659] pci 0001:10:19.0: reg 10: [mem 0x80080000-0x80080fff]
[ 0.024952] PCI host bridge to bus 0002:20
[ 0.024981] pci_bus 0002:20: root bus resource [io
0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff])
[ 0.025012] pci_bus 0002:20: root bus resource [mem
0xf5000000-0xf5ffffff]
[ 0.025066] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000
[ 0.025126] pci 0002:20:0d.0: [106b:0033] type 00 class 0xff0000
[ 0.025144] pci 0002:20:0d.0: reg 10: [mem 0xf5004000-0xf5007fff]
[ 0.025212] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010
[ 0.025233] pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff]
[ 0.025292] pci 0002:20:0e.0: supports D1 D2
[ 0.025300] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.025329] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000
[ 0.025347] pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff]
[ 0.025391] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref]
[ 0.026420] PCI 0001:10 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.026443] pci 0000:00:10.0: BAR 2: assigned [mem
0xf1000000-0xf107ffff pref]
[ 0.026485] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff]
[ 0.026493] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.026501] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.026509] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
[ 0.026517] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.026525] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.026533] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff]
[ 0.026541] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.040171] bio: create slab <bio-0> at 0
[ 0.041044] vgaarb: device added:
PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.041124] vgaarb: loaded
[ 0.041138] vgaarb: bridge control possible 0000:00:10.0
[ 0.041767] SCSI subsystem initialized
[ 0.042242] libata version 3.00 loaded.
[ 0.042661] usbcore: registered new interface driver usbfs
[ 0.042839] usbcore: registered new interface driver hub
[ 0.043046] usbcore: registered new device driver usb
[ 0.043610] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.044434] Switching to clocksource timebase
[ 0.056661] NET: Registered protocol family 2
[ 0.056832] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.057466] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.059937] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.061777] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.061818] TCP: reno registered
[ 0.061845] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.061899] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.062184] NET: Registered protocol family 1
[ 0.062301] pci 0001:10:18.0: enabling device (0000 -> 0002)
[ 0.112542] pci 0001:10:19.0: enabling device (0000 -> 0002)
[ 0.163532] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.163724] Trying to unpack rootfs image as initramfs...
[ 0.374104] Freeing initrd memory: 4064k freed
[ 0.375276] Thermal assist unit not available
[ 0.377113] highmem bounce pool size: 64 pages
[ 0.393582] fuse init (API version 7.19)
[ 0.394172] msgmni has been set to 1489
[ 0.396965] alg: No test for stdrng (krng)
[ 0.418813] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.418856] io scheduler noop registered
[ 0.419099] io scheduler cfq registered (default)
[ 0.419447] Using unsupported 1600x1200 NVDA,Display-B at 98004000,
depth=8, pitch=2048
[ 0.450602] Console: switching to colour frame buffer device 200x75
[ 0.479372] fb0: Open Firmware frame buffer device on
/pci at f0000000/NVDA,Parent at 10/NVDA,Display-B at 1
[ 0.479661] Using unsupported 640x480 NVDA,Display-A at 99000000,
depth=8, pitch=640
[ 0.479898] checking generic (98004000 258000) vs hw (99000000 4b000)
[ 0.480124] fb1: Open Firmware frame buffer device on
/pci at f0000000/NVDA,Parent at 10/NVDA,Display-A at 0
[ 0.480587] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.481886] pmac_zilog: 0.6 (Benjamin Herrenschmidt
<benh at kernel.crashing.org>)
[ 0.482291] Generic non-volatile memory driver v1.1
[ 0.482593] Linux agpgart interface v0.103
[ 0.482736] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 0.484460] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 0.484827] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 0.491700] brd: module loaded
[ 0.495335] loop: module loaded
[ 0.495689] MacIO PCI driver attached to Keylargo chipset
[ 0.498235] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is
a Z85c30 ESCC - Serial port
[ 0.498968] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is
a Z85c30 ESCC - Serial port
[ 0.500475] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002)
[ 0.511513] pata-pci-macio 0002:20:0d.0: Activating pata-macio
chipset UniNorth ATA-6, Apple bus ID 3
[ 0.512635] scsi0 : pata_macio
[ 0.513093] ata1: PATA max UDMA/100 irq 39
[ 0.667968] ata1.00: ATA-5: IBM-IC35L060AVVA07-0, VA3BA52A, max UDMA/100
[ 0.668179] ata1.00: 120103200 sectors, multi 16: LBA
[ 0.676945] ata1.00: configured for UDMA/100
[ 0.677456] scsi 0:0:0:0: Direct-Access ATA IBM-IC35L060AVVA
VA3B PQ: 0 ANSI: 5
[ 1.525510] pata-macio 0.0001f000:ata-4: Activating pata-macio
chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.526619] scsi1 : pata_macio
[ 1.527015] ata2: PATA max UDMA/66 irq 19
[ 1.697163] ata2.00: HPA detected: current 40130390, native 40132503
[ 1.697343] ata2.00: ATA-5: QUANTUM FIREBALLP LM20.5, A35.0700, max
UDMA/66
[ 1.697535] ata2.00: 40130390 sectors, multi 0: LBA
[ 1.697675] ata2.00: FORCE: xfer_mask set to pio4
[ 1.720124] ata2.00: configured for PIO4
[ 1.720481] scsi 1:0:0:0: Direct-Access ATA QUANTUM FIREBALL
A35. PQ: 0 ANSI: 5
[ 2.538510] pata-macio 0.00020000:ata-3: Activating pata-macio
chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.539571] scsi2 : pata_macio
[ 2.539987] ata3: PATA max MWDMA2 irq 20
[ 2.540364] sungem.c:v1.0 David S. Miller <davem at redhat.com>
[ 2.541529] gem 0002:20:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT
Ethernet 00:03:93:ab:d1:a6
[ 2.542312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.542818] ohci_hcd 0001:10:18.0: OHCI Host Controller
[ 2.542980] ohci_hcd 0001:10:18.0: new USB bus registered, assigned
bus number 1
[ 2.543251] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
[ 2.613408] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.613604] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.613797] usb usb1: Product: OHCI Host Controller
[ 2.613926] usb usb1: Manufacturer: Linux 3.5.0-rc7+ ohci_hcd
[ 2.622108] usb usb1: SerialNumber: 0001:10:18.0
[ 2.622663] hub 1-0:1.0: USB hub found
[ 2.622683] hub 1-0:1.0: 2 ports detected
[ 2.622841] ohci_hcd 0001:10:19.0: OHCI Host Controller
[ 2.622856] ohci_hcd 0001:10:19.0: new USB bus registered, assigned
bus number 2
[ 2.622907] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
[ 2.692391] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.700756] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB02, max UDMA/66
[ 2.708672] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.716736] usb usb2: Product: OHCI Host Controller
[ 2.724896] usb usb2: Manufacturer: Linux 3.5.0-rc7+ ohci_hcd
[ 2.733113] ata3.00: configured for MWDMA2
[ 2.737517] usb usb2: SerialNumber: 0001:10:19.0
[ 2.749518] hub 2-0:1.0: USB hub found
[ 2.757747] hub 2-0:1.0: 2 ports detected
[ 2.766328] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.766676] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S222A
SB02 PQ: 0 ANSI: 5
[ 2.783116] mousedev: PS/2 mouse device common for all mice
[ 2.784565] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.784571] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.785023] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.808056] rtc-generic rtc-generic: rtc core: registered rtc-generic
as rtc0
[ 2.816567] i2c /dev entries driver
[ 2.825370] i2c i2c-0: therm_windtunnel: attach_adapter method is
deprecated
[ 2.833666] i2c i2c-0: Please use another way to instantiate your
i2c_client
[ 2.841935] PowerMac i2c bus pmu 2 registered
[ 2.850440] i2c i2c-1: therm_windtunnel: attach_adapter method is
deprecated
[ 2.858624] i2c i2c-1: Please use another way to instantiate your
i2c_client
[ 2.866754] PowerMac i2c bus pmu 1 registered
[ 2.875415] i2c i2c-2: therm_windtunnel: attach_adapter method is
deprecated
[ 2.883473] i2c i2c-2: Please use another way to instantiate your
i2c_client
[ 2.891500] PowerMac i2c bus mac-io 0 registered
[ 2.899496] i2c i2c-2: i2c-powermac: invalid reg on
/pci at f2000000/mac-io at 17/i2c at 18000/cereal
[ 2.907626] i2c i2c-2: i2c-powermac: invalid reg on
/pci at f2000000/mac-io at 17/i2c at 18000/deq
[ 2.915711] i2c i2c-2: i2c-powermac: invalid reg on
/pci at f2000000/mac-io at 17/i2c at 18000/i2c-modem
[ 2.924148] i2c i2c-3: therm_windtunnel: attach_adapter method is
deprecated
[ 2.932259] i2c i2c-3: Please use another way to instantiate your
i2c_client
[ 2.941370] PowerMac i2c bus uni-n 1 registered
[ 2.949523] i2c i2c-3: i2c-powermac: invalid reg on
/uni-n at f8000000/i2c at f8001000/cereal
[ 2.958084] i2c i2c-4: therm_windtunnel: attach_adapter method is
deprecated
[ 2.958531] usb 1-1: new full-speed USB device number 2 using ohci_hcd
[ 2.974633] i2c i2c-4: Please use another way to instantiate your
i2c_client
[ 2.984188] DS1775 digital thermometer [@49]
[ 2.992590] Temp: 58.1 C Hyst: 70.0 C OS: 75.0 C
[ 3.001592] ADM1030 fan controller [@2c]
[ 3.009847] PowerMac i2c bus uni-n 0 registered
[ 3.018007] i2c i2c-4: Failed to register i2c client MAC,adm1030 at
0x2c (-16)
[ 3.026299] i2c i2c-4: i2c-powermac: Failure to register
/uni-n at f8000000/i2c at f8001000/fan at 58
[ 3.034827] i2c i2c-4: Failed to register i2c client MAC,ds1775 at
0x49 (-16)
[ 3.043106] i2c i2c-4: i2c-powermac: Failure to register
/uni-n at f8000000/i2c at f8001000/temp-monitor at 92
[ 3.051420] i2c i2c-4: i2c-powermac: invalid reg on
/uni-n at f8000000/i2c at f8001000/cereal
[ 3.060750] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel at redhat.com
[ 3.071757] usbcore: registered new interface driver usbhid
[ 3.080215] usbhid: USB HID core driver
[ 3.088767] TCP: cubic registered
[ 3.097981] NET: Registered protocol family 10
[ 3.106997] sit: IPv6 over IPv4 tunneling driver
[ 3.116214] NET: Registered protocol family 17
[ 3.125056] registered taskstats version 1
[ 3.133221] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 3.141806] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 3.142123] input: PMU as /devices/virtual/input/input0
[ 3.158220] usb 1-1: Product: USB2.0 Hub
[ 3.158235] rtc-generic rtc-generic: setting system clock to
2012-07-20 14:13:40 UTC (1342793620)
[ 3.158267] ALSA device list:
[ 3.158269] No soundcards found.
[ 3.191467] Freeing unused kernel memory: 236k freed
[ 3.200129] hub 1-1:1.0: USB hub found
[ 3.209554] hub 1-1:1.0: 4 ports detected
[ 3.506533] usb 1-1.1: new full-speed USB device number 3 using ohci_hcd
[ 3.604581] usb 1-1.1: New USB device found, idVendor=05e3,
idProduct=0608
[ 3.614028] usb 1-1.1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 3.622455] usb 1-1.1: Product: USB2.0 Hub
[ 3.632649] hub 1-1.1:1.0: USB hub found
[ 3.641563] hub 1-1.1:1.0: 4 ports detected
[ 3.676594] sd 1:0:0:0: [sdb] 40130390 512-byte logical blocks: (20.5
GB/19.1 GiB)
[ 3.685049] sd 0:0:0:0: [sda] 120103200 512-byte logical blocks:
(61.4 GB/57.2 GiB)
[ 3.693552] sd 0:0:0:0: [sda] Write Protect is off
[ 3.701893] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.710039] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.710088] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.710185] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.718425] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.733521] sdb: [mac] sdb1 sdb2
[ 3.741916] sda: [mac] sda1 sda2 sda3 sda4
[ 3.752562] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.760667] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.765386] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
[ 3.818016] firewire_ohci 0002:20:0e.0: added OHCI v1.10 device as
card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 3.952567] usb 1-1.1.2: new low-speed USB device number 4 using ohci_hcd
[ 4.059556] usb 1-1.1.2: New USB device found, idVendor=046d,
idProduct=c05f
[ 4.067674] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4.075979] usb 1-1.1.2: Product: USB Optical Mouse
[ 4.084184] usb 1-1.1.2: Manufacturer: Logitech
[ 4.100649] input: Logitech USB Optical Mouse as
/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input1
[ 4.109222] hid-generic 0003:046D:C05F.0001: input,hidraw0: USB HID
v1.11 Mouse [Logitech USB Optical Mouse] on usb-0001:10:18.0-1.1.2/input0
[ 4.187566] usb 1-1.1.4: new low-speed USB device number 5 using ohci_hcd
[ 4.298550] usb 1-1.1.4: New USB device found, idVendor=04d9,
idProduct=0022
[ 4.307154] usb 1-1.1.4: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 4.315731] usb 1-1.1.4: Product: USB Keyboard
[ 4.325248] firewire_core 0002:20:0e.0: created device fw0: GUID
000393fffeabd1a6, S400
[ 4.344770] input: USB Keyboard as
/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input2
[ 4.353865] hid-generic 0003:04D9:0022.0002: input,hidraw1: USB HID
v1.10 Keyboard [USB Keyboard] on usb-0001:10:18.0-1.1.4/input0
[ 4.383826] input: USB Keyboard as
/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/input/input3
[ 4.393591] hid-generic 0003:04D9:0022.0003: input,hidraw2: USB HID
v1.10 Device [USB Keyboard] on usb-0001:10:18.0-1.1.4/input1
[ 11.071787] CPU-temp: 58.3 C, Case: 42.0 C, Fan: 4 (tuned -7)
[ 17.491115] EXT3-fs (dm-1): mounted filesystem with writeback data mode
[ 17.500095] kjournald starting. Commit interval 5 seconds
[ 19.988537] udevd[844]: starting version 175
[ 21.035940] [drm] Initialized drm 1.1.0 20060810
[ 21.761861] snd-aoa-fabric-layout: Using direct GPIOs
[ 21.789148] i2c i2c-0: aoa_codec_tas: attach_adapter method is deprecated
[ 21.798499] i2c i2c-0: Please use another way to instantiate your
i2c_client
[ 21.807708] i2c i2c-1: aoa_codec_tas: attach_adapter method is deprecated
[ 21.817284] i2c i2c-1: Please use another way to instantiate your
i2c_client
[ 21.826853] i2c i2c-2: aoa_codec_tas: attach_adapter method is deprecated
[ 21.836126] i2c i2c-2: Please use another way to instantiate your
i2c_client
[ 21.836133] snd-aoa-codec-tas: found 'deq' node
[ 21.843569] snd-aoa-fabric-layout: can use this codec
[ 21.891167] snd-aoa-codec-tas: tas found, addr 0x35 on
/pci at f2000000/mac-io at 17/i2c at 18000/deq
[ 21.891216] i2c i2c-3: aoa_codec_tas: attach_adapter method is deprecated
[ 21.904528] i2c i2c-3: Please use another way to instantiate your
i2c_client
[ 21.914716] i2c i2c-4: aoa_codec_tas: attach_adapter method is deprecated
[ 21.924114] i2c i2c-4: Please use another way to instantiate your
i2c_client
[ 22.422901] snd_au8830 0001:10:15.0: enabling device (0004 -> 0007)
[ 22.432683] Vortex: init....
[ 22.765728] done.
[ 25.615272] EXT3-fs (dm-1): using internal journal
[ 28.262558] Adding 1048572k swap on /dev/mapper/power--group-swap_1.
Priority:-1 extents:1 across:1048572k
[ 30.133666] kjournald starting. Commit interval 5 seconds
[ 30.142936] EXT3-fs (dm-3): using internal journal
[ 30.151909] EXT3-fs (dm-3): mounted filesystem with writeback data mode
[ 30.182230] REISERFS (device dm-4): found reiserfs format "3.6" with
standard journal
[ 30.191216] REISERFS (device dm-4): using ordered data mode
[ 30.200049] reiserfs: using flush barriers
[ 30.214671] REISERFS (device dm-4): journal params: device dm-4, size
8192, journal first block 18, max trans len 1024, max batch 900, max
commit age 30, max trans age 30
[ 30.226596] REISERFS (device dm-4): checking transaction log (dm-4)
[ 30.279661] REISERFS (device dm-4): Using r5 hash to sort names
[ 30.562935] EXT4-fs (sdb2): barriers disabled
[ 30.577379] EXT4-fs (sdb2): mounted filesystem with writeback data
mode. Opts: barrier=0,data=writeback
[ 32.871229] usb 1-1.1.2: USB disconnect, device number 4
[ 35.075732] CPU-temp: 58.8 C, Case: 41.7 C, Fan: 5 (tuned +1)
[ 35.217224] usb 1-1.1.2: new low-speed USB device number 6 using ohci_hcd
[ 35.326226] usb 1-1.1.2: New USB device found, idVendor=046d,
idProduct=c05f
[ 35.338929] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 35.352827] usb 1-1.1.2: Product: USB Optical Mouse
[ 35.362657] usb 1-1.1.2: Manufacturer: Logitech
[ 35.371432] input: Logitech USB Optical Mouse as
/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input4
[ 35.371620] hid-generic 0003:046D:C05F.0004: input,hidraw0: USB HID
v1.11 Mouse [Logitech USB Optical Mouse] on usb-0001:10:18.0-1.1.2/input0
[ 36.152910] sungem_phy: PHY ID: 2060e1, addr: 0
[ 36.153154] gem 0002:20:0f.0: eth0: Found BCM5421 PHY
[ 36.164232] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.569869] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex
[ 38.579574] gem 0002:20:0f.0: eth0: Pause is enabled (rxfifo: 10240
off: 7168 on: 5632)
On kernel 3.4.5: lspci -vvv
0000:00:0b.0 Host bridge: Apple Inc. UniNorth 2 AGP
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: [80] AGP version 1.0
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Kernel driver in use: agpgart-uninorth
0000:00:10.0 VGA compatible controller: NVIDIA Corporation NV17
[GeForce4 MX 420] (rev a3) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation Device 0008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 91000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 98000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at f1000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at 90000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
0001:10:0b.0 Host bridge: Apple Inc. UniNorth 2 PCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0001:10:15.0 Multimedia audio controller: Aureal Semiconductor Vortex 2
(rev fe)
Subsystem: Diamond Multimedia Systems Monster Sound II
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (1000ns min, 3000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at 800c0000 (32-bit, non-prefetchable) [size=256K]
Region 1: I/O ports at 0410 [size=8]
Region 2: I/O ports at 0400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_au8830
0001:10:17.0 Unassigned class [ff00]: Apple Inc. KeyLargo Mac I/O (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:18.0 USB controller: Apple Inc. KeyLargo USB (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:10:19.0 USB controller: Apple Inc. KeyLargo USB (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0002:20:0b.0 Host bridge: Apple Inc. UniNorth 2 Internal PCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0002:20:0d.0 Unassigned class [ff00]: Apple Inc. UniNorth 2 ATA/100
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: pata-pci-macio
0002:20:0e.0 FireWire (IEEE 1394): Apple Inc. UniNorth 2 FireWire (rev
01) (prog-if 10 [OHCI])
Subsystem: Apple Inc. iBook G4 2004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci
0002:20:0f.0 Ethernet controller: Apple Inc. UniNorth 2 GMAC (Sun GEM)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
Kernel driver in use: gem
cat /proc/ioports
00000000-007fffff : /pci at f2000000
00000400-00000407 : 0001:10:15.0
00000400-00000407 : au8830
00000410-00000417 : 0001:10:15.0
00000410-00000417 : au8830
00802000-01001fff : /pci at f0000000
00802000-00802fff : Legacy IO
ff7fe000-ffffdfff : /pci at f4000000
ff7fe000-ff7fefff : Legacy IO
cat /proc/iomem
00000000-5fffffff : System RAM
80000000-8fffffff : /pci at f2000000
80000000-8007ffff : 0001:10:17.0
80000000-8007ffff : 0.80000000:mac-io
80000050-8000007f : 0.00000050:gpio
80008000-800080ff : 0.00010000:i2s
80008000-800080ff : i2sbus: i2s-a (tx)
80008100-800081ff : 0.00010000:i2s
80008100-800081ff : i2sbus: i2s-a (rx)
80008200-800082ff : 0.00010000:i2s
80008300-800083ff : 0.00010000:i2s
80008a00-80008aff : 0.0001f000:ata-4
80008a00-80008aff : pata-macio-dma
80008b00-80008bff : 0.00020000:ata-3
80008b00-80008bff : pata-macio-dma
80010000-80010fff : 0.00010000:i2s
80010000-80010fff : i2sbus: i2s-a (control)
80013000-80013000 : 0.00013000:ch-b
80013000-80013000 : pmac_zilog
80013010-80013010 : 0.00013000:ch-b
80013010-80013010 : pmac_zilog
80013020-80013020 : 0.00013020:ch-a
80013020-80013020 : pmac_zilog
80013030-80013030 : 0.00013020:ch-a
80013030-80013030 : pmac_zilog
80013040-80013040 : 0.00013000:ch-b
80013040-80013040 : pmac_zilog
80013050-80013050 : 0.00013020:ch-a
80013050-80013050 : pmac_zilog
80015000-80015fff : 0.00015000:timer
80016000-80017fff : 0.00016000:via-pmu
80018000-80018fff : 0.00018000:i2c
8001f000-8001ffff : 0.0001f000:ata-4
8001f000-8001ffff : pata-macio
80020000-80020fff : 0.00020000:ata-3
80020000-80020fff : pata-macio
80040000-8007ffff : 0.00040000:interrup
80080000-80080fff : 0001:10:19.0
80080000-80080fff : ohci_hcd
80081000-80081fff : 0001:10:18.0
80081000-80081fff : ohci_hcd
800c0000-800fffff : 0001:10:15.0
800c0000-800fffff : au8830
90000000-afffffff : /pci at f0000000
90000000-9001ffff : 0000:00:10.0
91000000-91ffffff : 0000:00:10.0
98000000-9fffffff : 0000:00:10.0
98004000-9825bfff : offb
99000000-9904afff : offb
f1000000-f1ffffff : /pci at f0000000
f1000000-f107ffff : 0000:00:10.0
f3000000-f3ffffff : /pci at f2000000
f5000000-f5ffffff : /pci at f4000000
f5000000-f5000fff : 0002:20:0e.0
f5000000-f5000fff : firewire_ohci
f5004000-f5007fff : 0002:20:0d.0
f5004000-f5007fff : pata-macio
f5100000-f51fffff : 0002:20:0f.0
f5200000-f53fffff : 0002:20:0f.0
f5200000-f53fffff : sungem
cat /proc/interrupts
CPU0 CPU1
19: 102335 246416 MPIC 1 Level pata-macio
20: 1880 4818 MPIC 1 Level pata-macio
25: 0 2 MPIC 1 Level VIA-PMU
26: 7 49 MPIC 1 Level keywest i2c
27: 6878 18995 MPIC 1 Level ohci_hcd:usb1
28: 0 1 MPIC 1 Level ohci_hcd:usb2
30: 0 0 MPIC 1 Level i2sbus: i2s-a (control)
31: 0 0 MPIC 1 Edge i2sbus: i2s-a (tx)
33: 0 0 MPIC 1 Edge i2sbus: i2s-a (rx)
39: 6376 17040 MPIC 1 Level pata-pci-macio
40: 8 14 MPIC 1 Level firewire_ohci
41: 752 2018 MPIC 1 Level eth0
42: 994 2269 MPIC 1 Level keywest i2c
47: 0 0 MPIC 1 Level GPIO1 ADB
58: 0 0 MPIC 1 Level snd_au8830
60: 0 0 MPIC 1 Edge lineout-detect
61: 0 0 MPIC 1 Edge headphone-detect
123: 0 0 MPIC 1 Edge ipi call function
124: 20414 17465 MPIC 1 Edge ipi reschedule
125: 9766 4066 MPIC 1 Edge ipi call function single
LOC: 1420948 1414212 Local timer interrupts
SPU: 0 3 Spurious interrupts
CNT: 0 0 Performance monitoring interrupts
MCE: 0 0 Machine check exceptions
power-debian:/home/andrey/personal/pbliga/pbliga# cat /proc/cpuinfo
processor : 0
cpu : 7455, altivec supported
clock : 866.666664MHz
revision : 2.1 (pvr 8001 0201)
bogomips : 66.60
processor : 1
cpu : 7455, altivec supported
clock : 866.666664MHz
revision : 2.1 (pvr 8001 0201)
bogomips : 66.60
total bogomips : 133.21
timebase : 33304672
platform : PowerMac
model : PowerMac3,6
machine : PowerMac3,6
motherboard : PowerMac3,6 MacRISC2 MacRISC Power Macintosh
detected as : 129 (PowerMac G4 Windtunnel)
pmac flags : 00000010
L2 cache : 256K unified
pmac-generation : NewWorld
Memory : 1536 MB
Best,
Andrey
More information about the Linuxppc-dev
mailing list