[PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
Zhao Chenhui
chenhui.zhao at freescale.com
Fri Jul 20 22:42:36 EST 2012
Add support to disable and re-enable individual cores at runtime
on MPC85xx/QorIQ SMP machines. Currently support e500v1/e500v2 core.
MPC85xx machines use ePAPR spin-table in boot page for CPU kick-off.
This patch uses the boot page from bootloader to boot core at runtime.
It supports 32-bit and 36-bit physical address.
Signed-off-by: Li Yang <leoli at freescale.com>
Signed-off-by: Jin Qing <b24347 at freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao at freescale.com>
---
arch/powerpc/Kconfig | 6 ++-
arch/powerpc/include/asm/cacheflush.h | 2 +
arch/powerpc/include/asm/smp.h | 1 +
arch/powerpc/kernel/head_fsl_booke.S | 28 ++++++++++
arch/powerpc/platforms/85xx/smp.c | 90 ++++++++++++++++++++++++++++-----
5 files changed, 112 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9a5d3cd..a7c6914 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -213,7 +213,8 @@ config ARCH_HIBERNATION_POSSIBLE
config ARCH_SUSPEND_POSSIBLE
def_bool y
depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
- (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
+ (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
+ || 44x || 40x
config PPC_DCR_NATIVE
bool
@@ -323,7 +324,8 @@ config SWIOTLB
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
- depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
+ depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
+ PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
---help---
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ab9e402..b843e35 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -30,6 +30,8 @@ extern void flush_dcache_page(struct page *page);
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+extern void __flush_disable_L1(void);
+
extern void __flush_icache_range(unsigned long, unsigned long);
static inline void flush_icache_range(unsigned long start, unsigned long stop)
{
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ce8e2bd..e807e9d 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -191,6 +191,7 @@ extern unsigned long __secondary_hold_spinloop;
extern unsigned long __secondary_hold_acknowledge;
extern char __secondary_hold;
+extern void __early_start(void);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 0f59863..b221541 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -1043,6 +1043,34 @@ _GLOBAL(flush_dcache_L1)
blr
+/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
+_GLOBAL(__flush_disable_L1)
+ mflr r10
+ bl flush_dcache_L1 /* Flush L1 d-cache */
+ mtlr r10
+
+ mfspr r4, SPRN_L1CSR0 /* Invalidate and disable d-cache */
+ li r5, 2
+ rlwimi r4, r5, 0, 3
+
+ msync
+ isync
+ mtspr SPRN_L1CSR0, r4
+ isync
+
+1: mfspr r4, SPRN_L1CSR0 /* Wait for the invalidate to finish */
+ andi. r4, r4, 2
+ bne 1b
+
+ mfspr r4, SPRN_L1CSR1 /* Invalidate and disable i-cache */
+ li r5, 2
+ rlwimi r4, r5, 0, 3
+
+ mtspr SPRN_L1CSR1, r4
+ isync
+
+ blr
+
#ifdef CONFIG_SMP
/* When we get here, r24 needs to hold the CPU # */
.globl __secondary_start
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 7ed52a6..6fcfa12 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -31,8 +31,6 @@
#include <sysdev/mpic.h>
#include "smp.h"
-extern void __early_start(void);
-
struct epapr_spin_table {
u32 addr_h;
u32 addr_l;
@@ -100,15 +98,45 @@ static void mpc85xx_take_timebase(void)
local_irq_restore(flags);
}
-static int __init
-smp_85xx_kick_cpu(int nr)
+#ifdef CONFIG_HOTPLUG_CPU
+static void __cpuinit smp_85xx_mach_cpu_die(void)
+{
+ unsigned int cpu = smp_processor_id();
+ u32 tmp;
+
+ local_irq_disable();
+ idle_task_exit();
+ generic_set_cpu_dead(cpu);
+ mb();
+
+ mtspr(SPRN_TCR, 0);
+
+ __flush_disable_L1();
+ tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
+ mtspr(SPRN_HID0, tmp);
+ isync();
+
+ /* Enter NAP mode. */
+ tmp = mfmsr();
+ tmp |= MSR_WE;
+ mb();
+ mtmsr(tmp);
+ isync();
+
+ while (1)
+ ;
+}
+#endif
+
+static int __cpuinit smp_85xx_kick_cpu(int nr)
{
unsigned long flags;
const u64 *cpu_rel_addr;
__iomem struct epapr_spin_table *spin_table;
struct device_node *np;
- int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
+ int hw_cpu = get_hard_smp_processor_id(nr);
int ioremappable;
+ int ret = 0;
WARN_ON(nr < 0 || nr >= NR_CPUS);
WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
@@ -139,9 +167,34 @@ smp_85xx_kick_cpu(int nr)
spin_table = phys_to_virt(*cpu_rel_addr);
local_irq_save(flags);
+#ifdef CONFIG_PPC32
+#ifdef CONFIG_HOTPLUG_CPU
+ /* Corresponding to generic_set_cpu_dead() */
+ generic_set_cpu_up(nr);
+
+ if (system_state == SYSTEM_RUNNING) {
+ out_be32(&spin_table->addr_l, 0);
+ /*
+ * We don't set the BPTR register here since it already points
+ * to the boot page properly.
+ */
+ mpic_reset_core(hw_cpu);
+
+ /* wait until core is ready... */
+ if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1,
+ 10000, 100)) {
+ pr_err("%s: timeout waiting for core %d to reset\n",
+ __func__, hw_cpu);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ /* clear the acknowledge status */
+ __secondary_hold_acknowledge = -1;
+ }
+#endif
out_be32(&spin_table->pir, hw_cpu);
-#ifdef CONFIG_PPC32
out_be32(&spin_table->addr_l, __pa(__early_start));
if (!ioremappable)
@@ -149,11 +202,18 @@ smp_85xx_kick_cpu(int nr)
(ulong)spin_table + sizeof(struct epapr_spin_table));
/* Wait a bit for the CPU to ack. */
- while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
- mdelay(1);
+ if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
+ 10000, 100)) {
+ pr_err("%s: timeout waiting for core %d to ack\n",
+ __func__, hw_cpu);
+ ret = -ENOENT;
+ goto out;
+ }
+out:
#else
smp_generic_kick_cpu(nr);
+ out_be32(&spin_table->pir, hw_cpu);
out_be64((u64 *)(&spin_table->addr_h),
__pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
@@ -167,13 +227,15 @@ smp_85xx_kick_cpu(int nr)
if (ioremappable)
iounmap(spin_table);
- pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
-
- return 0;
+ return ret;
}
struct smp_ops_t smp_85xx_ops = {
.kick_cpu = smp_85xx_kick_cpu,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = generic_cpu_disable,
+ .cpu_die = generic_cpu_die,
+#endif
#ifdef CONFIG_KEXEC
.give_timebase = smp_generic_give_timebase,
.take_timebase = smp_generic_take_timebase,
@@ -277,8 +339,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
}
#endif /* CONFIG_KEXEC */
-static void __init
-smp_85xx_setup_cpu(int cpu_nr)
+static void __cpuinit smp_85xx_setup_cpu(int cpu_nr)
{
if (smp_85xx_ops.probe == smp_mpic_probe)
mpic_setup_this_cpu();
@@ -329,6 +390,9 @@ void __init mpc85xx_smp_init(void)
}
smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+#ifdef CONFIG_HOTPLUG_CPU
+ ppc_md.cpu_die = smp_85xx_mach_cpu_die;
+#endif
}
smp_ops = &smp_85xx_ops;
--
1.6.4.1
More information about the Linuxppc-dev
mailing list