[PATCH] powerpc/sgmii: Add phy nodes in SGMII mode

[Kumar Gala]

On Jul 12, 2012, at 5:28 AM, Jia Hongtao-B38951 wrote:

> Note that this patch works with uboot update.
> Please refer to:
> http://patchwork.ozlabs.org/patch/170627/
> 
> -Hongtao.

Will RGMII still work with this patch if I dont update u-boot?

I'm assuming yes.

- k

> 
>> -----Original Message-----
>> From: Jia Hongtao-B38951
>> Sent: Thursday, July 12, 2012 5:36 PM
>> To: linuxppc-dev at lists.ozlabs.org; galak at kernel.crashing.org
>> Cc: Li Yang-R58472; Jia Hongtao-B38951
>> Subject: [PATCH] powerpc/sgmii: Add phy nodes in SGMII mode
>> 
>> In SGMII riser card different PHY chip are used with different external
>> IRQ from eTSEC. To support PHY link state auto detect in SGMII mode we
>> should add another group of PHY nodes for SGMII mode.
>> 
>> For MPC8572DS IRQ6 is used for PHY0~PHY1, IRQ7 is used for PHY2~PHY3.
>> For MPC8544DS and MPC8536DS IRQ6 is used for PHY0~PHY1.
>> For P2020DS IRQ5 is used for PHY1~PHY2.
>> 
>> Signed-off-by: Li Yang <leoli at freescale.com>
>> Signed-off-by: Jia Hongtao <B38951 at freescale.com>
>> ---
>> arch/powerpc/boot/dts/mpc8536ds.dtsi |    8 ++++++++
>> arch/powerpc/boot/dts/mpc8544ds.dtsi |    9 +++++++++
>> arch/powerpc/boot/dts/mpc8572ds.dtsi |   17 +++++++++++++++++
>> arch/powerpc/boot/dts/p2020ds.dtsi   |   10 ++++++++++
>> 4 files changed, 44 insertions(+), 0 deletions(-)
>> 
>