[PATCH] Revert "powerpc/p3060qds: Add support for P3060QDS board"
Timur Tabi
timur at freescale.com
Fri Jul 6 08:07:53 EST 2012
This reverts commit 96cc017c5b7ec095ef047d3c1952b6b6bbf98943.
The P3060 was cancelled before it went into production, so there's no point
in supporting it.
Signed-off-by: Timur Tabi <timur at freescale.com>
---
arch/powerpc/boot/dts/fsl/p3060si-post.dtsi | 302 --------------------------
arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi | 125 -----------
arch/powerpc/boot/dts/p3060qds.dts | 242 ---------------------
arch/powerpc/configs/corenet32_smp_defconfig | 1 -
arch/powerpc/platforms/85xx/Kconfig | 12 -
arch/powerpc/platforms/85xx/Makefile | 1 -
arch/powerpc/platforms/85xx/p3060_qds.c | 77 -------
7 files changed, 0 insertions(+), 760 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
delete mode 100644 arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p3060qds.dts
delete mode 100644 arch/powerpc/platforms/85xx/p3060_qds.c
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
deleted file mode 100644
index b3e5692..0000000
--- a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * P3060 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
- compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- interrupts = <16 2 1 15>;
- pcie at 0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
-};
-
-/* controller at 0x201000 */
-&pci1 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- interrupts = <16 2 1 14>;
- pcie at 0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
-};
-
-&rio {
- compatible = "fsl,srio";
- interrupts = <16 2 1 11>;
- #address-cells = <2>;
- #size-cells = <2>;
- fsl,srio-rmu-handle = <&rmu>;
- ranges;
-
- port1 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <1>;
- };
-
- port2 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <2>;
- };
-};
-
-&dcsr {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu at 0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc at 2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa at 9000 {
- compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn at 11000 {
- compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr at 12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal at 18000 {
- compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm at 22000 {
- compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy at 40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy at 41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy at 44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy at 45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy at 46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy at 47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
-
-};
-
-&soc {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law at 0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller at 8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller at 10000 {
- compatible = "fsl,p3060-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf at 18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu at 20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
-/include/ "qoriq-rmu-0.dtsi"
-/include/ "qoriq-mpic.dtsi"
-
- guts: global-utilities at e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities at e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities at e1000 {
- compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities at e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp at e8000 {
- compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes at ea000 {
- compatible = "fsl,p3060-serdes";
- reg = <0xea000 0x1000>;
- };
-
-/include/ "qoriq-dma-0.dtsi"
-/include/ "qoriq-dma-1.dtsi"
-/include/ "qoriq-espi-0.dtsi"
- spi at 110000 {
- fsl,espi-num-chipselects = <4>;
- };
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
- usb at 210000 {
- compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- };
-/include/ "qoriq-usb2-dr-0.dtsi"
- usb at 211000 {
- compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- };
-/include/ "qoriq-sec4.1-0.dtsi"
-};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
deleted file mode 100644
index 00c8e70..0000000
--- a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * P3060 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P3060";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc at 0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc at 1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc at 4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc at 5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc at 6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc at 7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
deleted file mode 100644
index 9ae875c..0000000
--- a/arch/powerpc/boot/dts/p3060qds.dts
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * P3060QDS Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p3060si-pre.dtsi"
-
-/ {
- model = "fsl,P3060QDS";
- compatible = "fsl,P3060QDS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- memory {
- device_type = "memory";
- };
-
- dcsr: dcsr at f00000000 {
- ranges = <0x00000000 0xf 0x00000000 0x01008000>;
- };
-
- soc: soc at ffe000000 {
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
- spi at 110000 {
- flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
- partition at u-boot {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition at kernel {
- label = "kernel";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition at dtb {
- label = "dtb";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition at fs {
- label = "file system";
- reg = <0x00700000 0x00900000>;
- };
- };
- flash at 1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,en25q32b";
- reg = <1>;
- spi-max-frequency = <40000000>; /* input clock */
- partition at spi1 {
- label = "spi1";
- reg = <0x00000000 0x00400000>;
- };
- };
- flash at 2 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db081d";
- reg = <2>;
- spi-max-frequency = <40000000>; /* input clock */
- partition at spi1 {
- label = "spi2";
- reg = <0x00000000 0x00100000>;
- };
- };
- flash at 3 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,sst25wf040";
- reg = <3>;
- spi-max-frequency = <40000000>; /* input clock */
- partition at spi3 {
- label = "spi3";
- reg = <0x00000000 0x00080000>;
- };
- };
- };
-
- i2c at 118000 {
- eeprom at 51 {
- compatible = "at24,24c256";
- reg = <0x51>;
- };
- eeprom at 53 {
- compatible = "at24,24c256";
- reg = <0x53>;
- };
- rtc at 68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0x1 0x1 0 0>;
- };
- };
-
- usb0: usb at 210000 {
- phy_type = "ulpi";
- };
-
- usb1: usb at 211000 {
- dr_mode = "host";
- phy_type = "ulpi";
- };
- };
-
- rio: rapidio at ffe0c0000 {
- reg = <0xf 0xfe0c0000 0 0x11000>;
-
- port1 {
- ranges = <0 0 0xc 0x20000000 0 0x10000000>;
- };
- port2 {
- ranges = <0 0 0xc 0x30000000 0 0x10000000>;
- };
- };
-
- lbc: localbus at ffe124000 {
- reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000
- 2 0 0xf 0xffa00000 0x00040000
- 3 0 0xf 0xffdf0000 0x00008000>;
-
- flash at 0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x08000000>;
- bank-width = <2>;
- device-width = <2>;
- };
-
- nand at 2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- partition at 0 {
- label = "NAND U-Boot Image";
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- partition at 2000000 {
- label = "NAND Root File System";
- reg = <0x02000000 0x10000000>;
- };
-
- partition at 12000000 {
- label = "NAND Compressed RFS Image";
- reg = <0x12000000 0x08000000>;
- };
-
- partition at 1a000000 {
- label = "NAND Linux Kernel Image";
- reg = <0x1a000000 0x04000000>;
- };
-
- partition at 1e000000 {
- label = "NAND DTB Image";
- reg = <0x1e000000 0x01000000>;
- };
-
- partition at 1f000000 {
- label = "NAND Writable User area";
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- board-control at 3,0 {
- compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
- reg = <3 0 0x100>;
- };
- };
-
- pci0: pcie at ffe200000 {
- reg = <0xf 0xfe200000 0 0x1000>;
- ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
- 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
- pcie at 0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-
- pci1: pcie at ffe201000 {
- reg = <0xf 0xfe201000 0 0x1000>;
- ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
- pcie at 0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-};
-
-/include/ "fsl/p3060si-post.dtsi"
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index b32d949..efce1d6 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -23,7 +23,6 @@ CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_P2041_RDB=y
CONFIG_P3041_DS=y
-CONFIG_P3060_QDS=y
CONFIG_P4080_DS=y
CONFIG_P5020_DS=y
CONFIG_HIGHMEM=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index b3370be..0e77f5f 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -216,18 +216,6 @@ config P3041_DS
help
This option enables support for the P3041 DS board
-config P3060_QDS
- bool "Freescale P3060 QDS"
- select DEFAULT_UIMAGE
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- help
- This option enables support for the P3060 QDS board
-
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 50280cc..3fee687 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
-obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c
deleted file mode 100644
index 081cf4a..0000000
--- a/arch/powerpc/platforms/85xx/p3060_qds.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * P3060 QDS Setup
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p3060_qds_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
- extern struct smp_ops_t smp_85xx_ops;
-#endif
-
- if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
- return 1;
-
- /* Check if we're running under the Freescale hypervisor */
- if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
- ppc_md.init_IRQ = ehv_pic_init;
- ppc_md.get_irq = ehv_pic_get_irq;
- ppc_md.restart = fsl_hv_restart;
- ppc_md.power_off = fsl_hv_halt;
- ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
- /*
- * Disable the timebase sync operations because we can't write
- * to the timebase registers under the hypervisor.
- */
- smp_85xx_ops.give_timebase = NULL;
- smp_85xx_ops.take_timebase = NULL;
-#endif
- return 1;
- }
-
- return 0;
-}
-
-define_machine(p3060_qds) {
- .name = "P3060 QDS",
- .probe = p3060_qds_probe,
- .setup_arch = corenet_ds_setup_arch,
- .init_IRQ = corenet_ds_pic_init,
-#ifdef CONFIG_PCI
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
-#endif
- .get_irq = mpic_get_coreint_irq,
- .restart = fsl_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
- .power_save = e500_idle,
-};
-
-machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
-#endif
--
1.7.3.4
More information about the Linuxppc-dev
mailing list