[PATCH 1/2] P1025RDB: Add p1025rdb platform support

[Zhicheng Fan]

From: Fanzc <b32736 at freeescale.com>

Signed-off-by: Fanzc <b32736 at freeescale.com>
---
 arch/powerpc/platforms/85xx/mpc85xx_rdb.c |   24 ++++++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index ccf520e..1950076 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -90,6 +90,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
 
 machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
 machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -112,6 +113,15 @@ static int __init p1020_rdb_probe(void)
 	return 0;
 }
 
+static int __init p1025_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P1025RDB"))
+		return 1;
+	return 0;
+}
+
 define_machine(p2020_rdb) {
 	.name			= "P2020 RDB",
 	.probe			= p2020_rdb_probe,
@@ -139,3 +149,17 @@ define_machine(p1020_rdb) {
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
+
+define_machine(p1025_rdb) {
+	.name			= "P1025 RDB",
+	.probe			= p1025_rdb_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
-- 
1.7.0.4