[SDK v1.2][PATCH 1/2 v3] powerpc/85xx: Add dts for P1021RDB-PC board
Xu Jiucheng
B37781 at freescale.com
Tue Jan 10 18:22:30 EST 2012
I'm sorry, please ignore this email.
Thanks & Best Regards
Jiucheng
在 2012-01-09Mon的 14:53 +0800，Xu Jiucheng写道：
> P1021RDB-PC Overview
> -----------------
> 1Gbyte DDR3 (on board DDR)
> 16Mbyte NOR flash
> 32Mbyte eSLC NAND Flash
> 256 Kbit M24256 I2C EEPROM
> 128 Mbit SPI Flash memory
> Real-time clock on I2C bus
> SD/MMC connector to interface with the SD memory card
> PCIex
> - x1 PCIe slot or x1 PCIe to dual SATA controller
> - x1 mini-PCIe slot
> USB 2.0
> - ULPI PHY interface: SMSC USB3300 USB PHY and Genesys Logic’s GL850A
> - Two USB2.0 Type A receptacles
> - One USB2.0 signal to Mini PCIe slot
> eTSEC1: Connected to RGMII PHY VSC7385
> eTSEC2: Connected to SGMII PHY VSC8221
> eTSEC3: Connected to SGMII PHY AR8021
> DUART interface: supports two UARTs up to 115200 bps for console display
>
> Signed-off-by: Matthew McClintock <msm at freescale.com>
> Signed-off-by: Xu Jiucheng <B37781 at freescale.com>
> ---
> arch/powerpc/boot/dts/fsl/p1021si-post.dtsi | 4 +
> arch/powerpc/boot/dts/p1021rdb.dts | 96 +++++++++++
> arch/powerpc/boot/dts/p1021rdb.dtsi | 236 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/p1021rdb_36b.dts | 96 +++++++++++
> 4 files changed, 432 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/p1021rdb.dts
> create mode 100644 arch/powerpc/boot/dts/p1021rdb.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1021rdb_36b.dts
>
> diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
> index 38ba54d..b7929c9 100644
> --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
> @@ -144,6 +144,10 @@
> /include/ "pq3-usb2-dr-0.dtsi"
>
> /include/ "pq3-esdhc-0.dtsi"
> + sdhc at 2e000 {
> + sdhci,auto-cmd12;
> + };
> +
> /include/ "pq3-sec3.3-0.dtsi"
>
> /include/ "pq3-mpic.dtsi"
> diff --git a/arch/powerpc/boot/dts/p1021rdb.dts b/arch/powerpc/boot/dts/p1021rdb.dts
> new file mode 100644
> index 0000000..90b6b4c
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/p1021rdb.dts
> @@ -0,0 +1,96 @@
> +/*
> + * P1021 RDB Device Tree Source
> + *
> + * Copyright 2011 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/include/ "fsl/p1021si-pre.dtsi"
> +/ {
> + model = "fsl,P1021RDB";
> + compatible = "fsl,P1021RDB-PC";
> +
> + memory {
> + device_type = "memory";
> + };
> +
> + lbc: localbus at ffe05000 {
> + reg = <0 0xffe05000 0 0x1000>;
> +
> + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
> + ranges = <0x0 0x0 0x0 0xef000000 0x01000000
> + 0x1 0x0 0x0 0xff800000 0x00040000
> + 0x2 0x0 0x0 0xffb00000 0x00020000>;
> + };
> +
> + soc: soc at ffe00000 {
> + ranges = <0x0 0x0 0xffe00000 0x100000>;
> + };
> +
> + pci0: pcie at ffe09000 {
> + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
> + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
> + reg = <0 0xffe09000 0 0x1000>;
> + pcie at 0 {
> + ranges = <0x2000000 0x0 0xa0000000
> + 0x2000000 0x0 0xa0000000
> + 0x0 0x20000000
> +
> + 0x1000000 0x0 0x0
> + 0x1000000 0x0 0x0
> + 0x0 0x100000>;
> + };
> + };
> +
> + pci1: pcie at ffe0a000 {
> + reg = <0 0xffe0a000 0 0x1000>;
> + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
> + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
> + pcie at 0 {
> + ranges = <0x2000000 0x0 0x80000000
> + 0x2000000 0x0 0x80000000
> + 0x0 0x20000000
> +
> + 0x1000000 0x0 0x0
> + 0x1000000 0x0 0x0
> + 0x0 0x100000>;
> + };
> + };
> +
> + qe: qe at ffe80000 {
> + ranges = <0x0 0x0 0xffe80000 0x40000>;
> + reg = <0 0xffe80000 0 0x480>;
> + brg-frequency = <0>;
> + bus-frequency = <0>;
> + };
> +};
> +
> +/include/ "p1021rdb.dtsi"
> +/include/ "fsl/p1021si-post.dtsi"
> diff --git a/arch/powerpc/boot/dts/p1021rdb.dtsi b/arch/powerpc/boot/dts/p1021rdb.dtsi
> new file mode 100644
> index 0000000..22ecb6e
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/p1021rdb.dtsi
> @@ -0,0 +1,236 @@
> +/*
> + * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
> + *
> + * Copyright 2011 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +&lbc {
> + nor at 0,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "cfi-flash";
> + reg = <0x0 0x0 0x1000000>;
> + bank-width = <2>;
> + device-width = <1>;
> +
> + partition at 0 {
> + /* This location must not be altered */
> + /* 256KB for Vitesse 7385 Switch firmware */
> + reg = <0x0 0x00040000>;
> + label = "NOR Vitesse-7385 Firmware";
> + read-only;
> + };
> +
> + partition at 40000 {
> + /* 256KB for DTB Image */
> + reg = <0x00040000 0x00040000>;
> + label = "NOR DTB Image";
> + };
> +
> + partition at 80000 {
> + /* 3.5 MB for Linux Kernel Image */
> + reg = <0x00080000 0x00380000>;
> + label = "NOR Linux Kernel Image";
> + };
> +
> + partition at 400000 {
> + /* 11MB for JFFS2 based Root file System */
> + reg = <0x00400000 0x00b00000>;
> + label = "NOR JFFS2 Root File System";
> + };
> +
> + partition at f00000 {
> + /* This location must not be altered */
> + /* 512KB for u-boot Bootloader Image */
> + /* 512KB for u-boot Environment Variables */
> + reg = <0x00f00000 0x00100000>;
> + label = "NOR U-Boot Image";
> + };
> + };
> +
> + nand at 1,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,p1020-fcm-nand",
> + "fsl,elbc-fcm-nand";
> + reg = <0x1 0x0 0x40000>;
> +
> + partition at 0 {
> + /* This location must not be altered */
> + /* 1MB for u-boot Bootloader Image */
> + reg = <0x0 0x00100000>;
> + label = "NAND U-Boot Image";
> + read-only;
> + };
> +
> + partition at 100000 {
> + /* 1MB for DTB Image */
> + reg = <0x00100000 0x00100000>;
> + label = "NAND DTB Image";
> + };
> +
> + partition at 200000 {
> + /* 4MB for Linux Kernel Image */
> + reg = <0x00200000 0x00400000>;
> + label = "NAND Linux Kernel Image";
> + };
> +
> + partition at 600000 {
> + /* 4MB for Compressed Root file System Image */
> + reg = <0x00600000 0x00400000>;
> + label = "NAND Compressed RFS Image";
> + };
> +
> + partition at a00000 {
> + /* 7MB for JFFS2 based Root file System */
> + reg = <0x00a00000 0x00700000>;
> + label = "NAND JFFS2 Root File System";
> + };
> +
> + partition at 1100000 {
> + /* 15MB for User Writable Area */
> + reg = <0x01100000 0x00f00000>;
> + label = "NAND Writable User area";
> + };
> + };
> +
> + L2switch at 2,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "vitesse-7385";
> + reg = <0x2 0x0 0x20000>;
> + };
> +};
> +
> +&soc {
> + i2c at 3000 {
> + rtc at 68 {
> + compatible = "pericom,pt7c4338";
> + reg = <0x68>;
> + };
> + };
> +
> + spi at 7000 {
> + flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spansion,s25sl12801";
> + reg = <0>;
> + spi-max-frequency = <40000000>; /* input clock */
> +
> + partition at u-boot {
> + /* 512KB for u-boot Bootloader Image */
> + reg = <0x0 0x00080000>;
> + label = "SPI Flash U-Boot Image";
> + read-only;
> + };
> +
> + partition at dtb {
> + /* 512KB for DTB Image */
> + reg = <0x00080000 0x00080000>;
> + label = "SPI Flash DTB Image";
> + };
> +
> + partition at kernel {
> + /* 4MB for Linux Kernel Image */
> + reg = <0x00100000 0x00400000>;
> + label = "SPI Flash Linux Kernel Image";
> + };
> +
> + partition at fs {
> + /* 4MB for Compressed RFS Image */
> + reg = <0x00500000 0x00400000>;
> + label = "SPI Flash Compressed RFSImage";
> + };
> +
> + partition at jffs-fs {
> + /* 7MB for JFFS2 based RFS */
> + reg = <0x00900000 0x00700000>;
> + label = "SPI Flash JFFS2 RFS";
> + };
> + };
> + };
> +
> + usb at 22000 {
> + phy_type = "ulpi";
> + };
> +
> + mdio at 24000 {
> + phy0: ethernet-phy at 0 {
> + interrupt-parent = <&mpic>;
> + interrupts = <3 1>;
> + reg = <0x0>;
> + };
> +
> + phy1: ethernet-phy at 1 {
> + interrupt-parent = <&mpic>;
> + interrupts = <2 1>;
> + reg = <0x1>;
> + };
> +
> + tbi0: tbi-phy at 11 {
> + reg = <0x11>;
> + device_type = "tbi-phy";
> + };
> + };
> +
> + mdio at 25000 {
> + tbi1: tbi-phy at 11 {
> + reg = <0x11>;
> + device_type = "tbi-phy";
> + };
> + };
> +
> + mdio at 26000 {
> + tbi2: tbi-phy at 11 {
> + reg = <0x11>;
> + device_type = "tbi-phy";
> + };
> + };
> +
> + enet0: ethernet at b0000 {
> + fixed-link = <1 1 1000 0 0>;
> + phy-connection-type = "rgmii-id";
> +
> + };
> +
> + enet1: ethernet at b1000 {
> + phy-handle = <&phy0>;
> + tbi-handle = <&tbi1>;
> + phy-connection-type = "sgmii";
> + };
> +
> + enet2: ethernet at b2000 {
> + phy-handle = <&phy1>;
> + tbi-handle = <&tbi2>;
> + phy-connection-type = "rgmii-id";
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/p1021rdb_36b.dts b/arch/powerpc/boot/dts/p1021rdb_36b.dts
> new file mode 100644
> index 0000000..ea6d8b5
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/p1021rdb_36b.dts
> @@ -0,0 +1,96 @@
> +/*
> + * P1021 RDB Device Tree Source (36-bit address map)
> + *
> + * Copyright 2011 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/include/ "fsl/p1021si-pre.dtsi"
> +/ {
> + model = "fsl,P1021RDB";
> + compatible = "fsl,P1021RDB-PC";
> +
> + memory {
> + device_type = "memory";
> + };
> +
> + lbc: localbus at fffe05000 {
> + reg = <0xf 0xffe05000 0 0x1000>;
> +
> + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
> + ranges = <0x0 0x0 0xf 0xef000000 0x01000000
> + 0x1 0x0 0xf 0xff800000 0x00040000
> + 0x2 0x0 0xf 0xffb00000 0x00020000>;
> + };
> +
> + soc: soc at fffe00000 {
> + ranges = <0x0 0xf 0xffe00000 0x100000>;
> + };
> +
> + pci0: pcie at fffe09000 {
> + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
> + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
> + reg = <0xf 0xffe09000 0 0x1000>;
> + pcie at 0 {
> + ranges = <0x2000000 0x0 0xa0000000
> + 0x2000000 0x0 0xa0000000
> + 0x0 0x20000000
> +
> + 0x1000000 0x0 0x0
> + 0x1000000 0x0 0x0
> + 0x0 0x100000>;
> + };
> + };
> +
> + pci1: pcie at fffe0a000 {
> + reg = <0xf 0xffe0a000 0 0x1000>;
> + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
> + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
> + pcie at 0 {
> + ranges = <0x2000000 0x0 0xc0000000
> + 0x2000000 0x0 0xc0000000
> + 0x0 0x20000000
> +
> + 0x1000000 0x0 0x0
> + 0x1000000 0x0 0x0
> + 0x0 0x100000>;
> + };
> + };
> +
> + qe: qe at fffe80000 {
> + ranges = <0x0 0xf 0xffe80000 0x40000>;
> + reg = <0xf 0xffe80000 0 0x480>;
> + brg-frequency = <0>;
> + bus-frequency = <0>;
> + };
> +};
> +
> +/include/ "p1021rdb.dtsi"
> +/include/ "fsl/p1021si-post.dtsi"
More information about the Linuxppc-dev
mailing list