[PATCH 1/2 v2] powerpc/dts: Add dts for p1025rdb board

[Kumar Gala]

On Jan 31, 2012, at 3:51 AM, Zhicheng Fan wrote:

> From: Zhicheng Fan <b32736 at freeescale.com>
> 
> P1025RDB Overview
> ------------------
> 1Gbyte DDR3 SDRAM
> 32 Mbyte NAND flash
> 16Mbyte NOR flash
> 16 Mbyte SPI flash
> SD connector to interface with the SD memory card
> Real-time clock on I2C bus
> 
> PCIe:
> - x1 PCIe slot
> - x1 mini-PCIe slot
> 
> 10/100/1000 BaseT Ethernet ports:
> - eTSEC1, RGMII: one 10/100/1000 port using AtherosTM AR8021
> - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221
> - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021
> 
> USB 2.0 port:
> - Two USB2.0 Type A receptacles
> - One USB2.0 signal to Mini PCIe slot
> 
> Dual RJ45 UART ports:
> - DUART interface: supports two UARTs up to 115200 bps for console display
> 
> Signed-off-by: Zhicheng Fan <b32736 at freeescale.com>
> ---
> arch/powerpc/boot/dts/fsl/p1025si-post.dtsi |  228 +++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/p1025si-pre.dtsi  |   70 +++++++
> arch/powerpc/boot/dts/p1025rdb.dts          |  137 +++++++++++++
> arch/powerpc/boot/dts/p1025rdb.dtsi         |  286 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/p1025rdb_36b.dts      |   88 ++++++++
> 5 files changed, 809 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/p1025si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/p1025si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1025rdb.dts
> create mode 100644 arch/powerpc/boot/dts/p1025rdb.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1025rdb_36b.dts

For the p1024 & p1025 I do NOT want to add new dts/fsl/p1025si*.dtsi files.  We should use the p1020 and p1021 as they are identical.

- k