[git pull] Please pull powerpc.git next branch
Benjamin Herrenschmidt
benh at kernel.crashing.org
Sat Dec 15 07:44:57 EST 2012
Hi Linus !
Finally managed to get my head away from some other distractions
to put this pull request together, sorry for the lateness :-)
The main highlight is probably some base POWER8 support. There's
more to come such as transactional memory support but that will
wait for the next one.
Overall it's pretty quiet, or rather I've been pretty poor at
picking things up from patchwork and reviewing them this time
around and Kumar no better on the FSL side it seems...
Cheers,
Ben.
The following changes since commit d6dc24613c222f9057131ccbd5264a10bcba9f97:
Merge remote-tracking branch 'agust/merge' into merge (2012-11-21 13:24:49 +1100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next
for you to fetch changes up to d526e85f60fce9aa2a1432cbd06e3cf20c1644c8:
powerpc+of: Rename and fix OF reconfig notifier error inject module (2012-12-14 10:32:52 +1100)
----------------------------------------------------------------
Akinobu Mita (3):
powerpc/iommu: Use bitmap library
powerpc: Remove BITOP_MASK and BITOP_WORD from asm/bitops.h
powerpc: Use asm-generic/bitops/le.h
Alexey Kardashevskiy (1):
powerpc/pseries: Fix oops with MSIs when missing EEH PEs
Andreas Schwab (1):
powerpc/powermac/cpufreq_32: Set non-infinite transition time for 7447A driver
Anton Blanchard (3):
powerpc: Move most of setup.h out of uapi
powerpc: Remove stale function prototypes from setup.h
powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n build
Aravinda Prasad (1):
powerpc/ptrace: Enable hardware breakpoint upon re-registering
Benjamin Herrenschmidt (5):
powerpc/powernv: Fix OPAL debug entry
Merge branch 'dt' into next
Merge branch 'merge' into next
Merge remote-tracking branch 'kumar/next' into next
powerpc+of: Rename and fix OF reconfig notifier error inject module
Dan Horák (1):
fbdev: Add GXT4000P and GXT6500P support to the gxt4500 driver
Gavin Shan (2):
powerpc/pnv: Avoid bogus output
powerpc/eeh: Do not invalidate PE properly
Ian Munsie (5):
powerpc: Add set_mode hcall
powerpc: Add wrappers to enable/disable relocation on exceptions
powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function
powerpc: Enable relocation on during exceptions at boot
powerpc: Disable relocation on exceptions when kexecing
Jia Hongtao (1):
powerpc/fsl-pci: Add PCI controller ATMU PM support
JoonSoo Kim (1):
powerpc: Change free_bootmem() to kfree()
Julia Lawall (1):
powerpc/rtas_flash: Eliminate possible double free
K.Prasad (1):
powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags
Li Zhong (1):
powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning !
Matthew McClintock (1):
powerpc: dtc is required to build dtb files
Michael Ellerman (12):
powerpc/udbg: Remove unused udbg_read()
powerpc/xmon: Remove unused xmon_expect() & xmon_read_poll()
powerpc/xmon: Remove empty xmon_map_scc()
powerpc/xmon: Make xmon_getchar() static
powerpc/xmon: Merge start.c into nonstdio.c
powerpc/xmon: Remove renaming #defines of scanhex() and skipbl()
powerpc/xmon: Remove unused #defines
powerpc/xmon: Use STACK_FRAME_OVERHEAD in xmon_show_stack()
powerpc/xmon: Fiddle xmon_depth_to_print logic in xmon_show_stack()
powerpc/xmon: Fallback to printk() in xmon_printf() if udbg is not setup
powerpc: Remove no longer used ppc_md.idle_loop()
powerpc/perf: Add missing L2 constraint handling in Power7 PMU
Michael Neuling (16):
powerpc/ptrace: Fix spelling mistake
powerpc/ptrace: Remove unused addr parameter in ppc_del_hwdebug()
powerpc: make POWER7 setup code name generic
powerpc: Add POWER8 setup code
powerpc: POWER8 cputable entry
powerpc: Fix denorm symbol name
powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8
powerpc: Add POWER8 architected mode to cputable
powerpc: Whitespace changes in exception64s.S
powerpc: Remove unessessary 0x3000 location enforcement
powerpc: Make load_hander handle upto 64k offset
powerpc: Turn syscall handler into macros
powerpc: Add new macros needed for relocation on exceptions
powerpc: Add relocation on exception vector handlers
powerpc: Move initial mfspr LPCR out of __init_LPCR
powerpc: Setup relocation on exceptions for bare metal systems
Nathan Fontenot (6):
powerpc+of: Add /proc device tree updating to of node add/remove
powerpc+of: Move of_drconf_cell struct definition to asm/prom.h
powerpc+of: Add of node/property notification chain for adds and removes
powerpc+of: Rename the drivers/of prom_* functions to of_*
powerpc+of: Remove the pSeries_reconfig.h file
powerpc+of: Export of_reconfig_notifier_[register,unregister]
Nishanth Aravamudan (1):
powerpc/pseries: Double NR_CPUS in defconfig
Srinivas Kandagatla (1):
powerpc/sysdev: Use module_platform_driver macro
Sukadev Bhattiprolu (1):
powerpc/perf: Use uapi/unistd.h to fix build error
Timur Tabi (2):
drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS]
powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI
Tony Breeds (2):
powerpc/47x: Use the new ppc-opcode infrastructure
powerpc: Add asm/debug.h to get powerpc_debugfs_root
Tushar Behera (1):
powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers
Varun Sethi (1):
powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct
Wei Yongjun (1):
powerpc/windfarm: Use module_i2c_driver to simplify the code
Xuelin Shi (1):
powerpc/dma/raidengine: add raidengine device
Yang Li (1):
powerpc: Fix typos in Freescale copyright claims
York Sun (1):
powerpc/mpc85xx: Change spin table to cached memory
.../devicetree/bindings/powerpc/fsl/raideng.txt | 81 +++++
Documentation/powerpc/ptrace.txt | 16 +
arch/arm/mach-mxs/mach-mxs.c | 2 +-
arch/powerpc/Makefile | 2 +-
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 1 +
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 6 +
arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi | 85 ++++++
arch/powerpc/configs/pseries_defconfig | 2 +-
arch/powerpc/include/asm/bitops.h | 75 +----
arch/powerpc/include/asm/cputable.h | 12 +-
arch/powerpc/include/asm/dbell.h | 2 +-
arch/powerpc/include/asm/exception-64s.h | 97 +++++-
arch/powerpc/include/asm/firmware.h | 4 +-
arch/powerpc/include/asm/fsl_gtm.h | 2 +-
arch/powerpc/include/asm/fsl_guts.h | 4 +-
arch/powerpc/include/asm/hvcall.h | 23 +-
arch/powerpc/include/asm/immap_qe.h | 2 +-
arch/powerpc/include/asm/machdep.h | 3 -
arch/powerpc/include/asm/mmu.h | 1 +
arch/powerpc/include/asm/pSeries_reconfig.h | 47 ---
arch/powerpc/include/asm/ppc-opcode.h | 6 +-
arch/powerpc/include/asm/prom.h | 16 +
arch/powerpc/include/asm/qe.h | 2 +-
arch/powerpc/include/asm/qe_ic.h | 2 +-
arch/powerpc/include/asm/reg.h | 3 +
arch/powerpc/include/asm/rtas.h | 5 +
arch/powerpc/include/asm/setup.h | 29 ++
arch/powerpc/include/asm/ucc.h | 2 +-
arch/powerpc/include/asm/ucc_fast.h | 2 +-
arch/powerpc/include/asm/ucc_slow.h | 2 +-
arch/powerpc/include/asm/udbg.h | 1 -
arch/powerpc/include/uapi/asm/setup.h | 31 --
arch/powerpc/kernel/Makefile | 2 +-
.../{cpu_setup_power7.S => cpu_setup_power.S} | 32 +-
arch/powerpc/kernel/cputable.c | 38 +++
arch/powerpc/kernel/entry_64.S | 2 +
arch/powerpc/kernel/exceptions-64s.S | 308 ++++++++++++++++----
arch/powerpc/kernel/head_64.S | 6 +-
arch/powerpc/kernel/idle.c | 3 -
arch/powerpc/kernel/iommu.c | 16 +-
arch/powerpc/kernel/machine_kexec.c | 14 +-
arch/powerpc/kernel/machine_kexec_64.c | 8 +-
arch/powerpc/kernel/pci_32.c | 2 +-
arch/powerpc/kernel/prom.c | 7 +-
arch/powerpc/kernel/prom_init.c | 11 +-
arch/powerpc/kernel/ptrace.c | 90 +++++-
arch/powerpc/kernel/rtas.c | 1 -
arch/powerpc/kernel/rtas_flash.c | 4 +-
arch/powerpc/kernel/setup_64.c | 5 +
arch/powerpc/kernel/udbg.c | 23 --
arch/powerpc/mm/numa.c | 12 -
arch/powerpc/mm/tlb_nohash_low.S | 15 +-
arch/powerpc/perf/power7-pmu.c | 17 +-
arch/powerpc/platforms/52xx/lite5200.c | 2 +-
arch/powerpc/platforms/82xx/pq2ads-pci-pic.c | 8 +-
arch/powerpc/platforms/83xx/mpc832x_mds.c | 2 +-
arch/powerpc/platforms/83xx/mpc836x_mds.c | 2 +-
arch/powerpc/platforms/83xx/mpc836x_rdk.c | 2 +-
arch/powerpc/platforms/83xx/mpc837x_rdb.c | 2 +-
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 2 +-
arch/powerpc/platforms/85xx/p1022_ds.c | 8 +-
arch/powerpc/platforms/85xx/smp.c | 49 +++-
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 2 +
arch/powerpc/platforms/powermac/cpufreq_32.c | 5 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 25 +-
arch/powerpc/platforms/ps3/os-area.c | 6 +-
arch/powerpc/platforms/pseries/dlpar.c | 34 +--
arch/powerpc/platforms/pseries/eeh_pe.c | 2 +-
arch/powerpc/platforms/pseries/firmware.c | 1 +
arch/powerpc/platforms/pseries/hotplug-cpu.c | 8 +-
arch/powerpc/platforms/pseries/hotplug-memory.c | 60 ++--
arch/powerpc/platforms/pseries/iommu.c | 10 +-
arch/powerpc/platforms/pseries/mobility.c | 4 +-
arch/powerpc/platforms/pseries/msi.c | 3 +-
arch/powerpc/platforms/pseries/plpar_wrappers.h | 31 ++
arch/powerpc/platforms/pseries/reconfig.c | 119 +-------
arch/powerpc/platforms/pseries/setup.c | 77 ++++-
arch/powerpc/platforms/pseries/smp.c | 1 -
arch/powerpc/sysdev/fsl_gtm.c | 2 +-
arch/powerpc/sysdev/fsl_pci.c | 37 ++-
arch/powerpc/sysdev/pmi.c | 13 +-
arch/powerpc/sysdev/qe_lib/qe.c | 2 +-
arch/powerpc/sysdev/qe_lib/qe_ic.c | 2 +-
arch/powerpc/sysdev/qe_lib/qe_ic.h | 2 +-
arch/powerpc/sysdev/qe_lib/qe_io.c | 2 +-
arch/powerpc/sysdev/qe_lib/ucc.c | 2 +-
arch/powerpc/sysdev/qe_lib/ucc_fast.c | 2 +-
arch/powerpc/sysdev/qe_lib/ucc_slow.c | 2 +-
arch/powerpc/sysdev/qe_lib/usb.c | 2 +-
arch/powerpc/xmon/Makefile | 2 +-
arch/powerpc/xmon/nonstdio.c | 53 ++--
arch/powerpc/xmon/nonstdio.h | 6 -
arch/powerpc/xmon/start.c | 34 ---
arch/powerpc/xmon/xmon.c | 26 +-
drivers/crypto/nx/nx-842.c | 20 +-
drivers/crypto/nx/nx.c | 1 -
drivers/infiniband/hw/ehca/hcp_if.c | 20 --
drivers/macintosh/smu.c | 2 +-
drivers/macintosh/windfarm_fcu_controls.c | 14 +-
drivers/macintosh/windfarm_lm75_sensor.c | 14 +-
drivers/macintosh/windfarm_max6690_sensor.c | 13 +-
drivers/macintosh/windfarm_smu_sat.c | 13 +-
drivers/net/ethernet/ibm/ehea/ehea_phyp.h | 20 --
drivers/of/base.c | 142 ++++++++-
drivers/video/Kconfig | 8 +-
drivers/video/gxt4500.c | 15 +-
drivers/virt/fsl_hypervisor.c | 3 -
include/linux/of.h | 29 +-
lib/Kconfig.debug | 10 +-
lib/Makefile | 4 +-
...nject.c => of-reconfig-notifier-error-inject.c} | 22 +-
tools/perf/perf.h | 2 +-
112 files changed, 1387 insertions(+), 803 deletions(-)
create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
delete mode 100644 arch/powerpc/include/asm/pSeries_reconfig.h
create mode 100644 arch/powerpc/include/asm/setup.h
rename arch/powerpc/kernel/{cpu_setup_power7.S => cpu_setup_power.S} (80%)
delete mode 100644 arch/powerpc/xmon/start.c
rename lib/{pSeries-reconfig-notifier-error-inject.c => of-reconfig-notifier-error-inject.c} (51%)
More information about the Linuxppc-dev
mailing list