pci and pcie device-tree binding - range No cells

Michal Simek monstr at monstr.eu
Tue Dec 11 02:37:26 EST 2012


On 12/10/2012 04:21 PM, Rob Herring wrote:
> On 12/10/2012 09:05 AM, Michal Simek wrote:
>> On 12/10/2012 03:26 PM, Rob Herring wrote:
>>> On 12/10/2012 06:20 AM, Michal Simek wrote:
>>>> Hi Grant and others,
>>>>
>>>> I have a question regarding number of cells in ranges property
>>>> for pci and pcie nodes.
>>>>
>>>> Linux pci/pcie powerpc DTSes contain 7 cells (xpedite5370.dts,
>>>> sequoia.dts, etc)
>>>> but also 6 cells format too (mpc832x_mds.dts)
>>>>
>>>> Here is shown 6 cells ranges format and describe
>>>> http://devicetree.org/Device_Tree_Usage#PCI_Host_Bridge
>>>>
>>>> And also in documentation in the linux
>>>> Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
>>>>
>>>> Both format uses:
>>>> #size-cells = <2>;
>>>> #address-cells = <3>;
>>>>
>>>> What is valid format?
>>>
>>> Both. 7 cells are valid when the host (parent) bus is 64-bit and 6 cells
>>> are valid when the host bus is 32-bit. The ranges property is <<child
>>> address> <parent address> <size>>. The parent address #address-cells is
>>> taken from the parent node.
>>
>> Ok. Got it.
>>
>> Here is what we use on zynq and microblaze - both 32bit which should be
>> fine.
>>
>>      ps7_axi_interconnect_0: axi at 0 {
>>          #address-cells = <1>;
>>          #size-cells = <1>;
>>          axi_pcie_0: axi-pcie at 50000000 {
>>              #address-cells = <3>;
>>              #size-cells = <2>;
>>              compatible = "xlnx,axi-pcie-1.05.a";
>>              ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
>>              ...
>>          }
>>      }
>>
>> What I am wondering is pci_process_bridge_OF_ranges() at
>> arch/powerpc/kernel/pci-common.c
>> where there are used some hardcoded values which should be probably
>> loaded from device-tree.
>>
>> For example:
>> 683         int np = pna + 5;
>> ...
>> 702                 pci_addr = of_read_number(ranges + 1, 2);
>> 703                 cpu_addr = of_translate_address(dev, ranges + 3);
>> 704                 size = of_read_number(ranges + pna + 3, 2);
>
> These would always be correct whether you have 6 or 7 cells. pna is the
> parent bus address cells size. The pci address is fixed at 3 cells.

Sorry for my pci ignorance (have never got hw for mb/zynq)
I just want to get better overview how we should we our drivers to be compatible.

Does it mean that pci is supposed be always 64 bit wide?
And there is no option to have just 32bit values.

>> Unfortunately we have copied it to microblaze.
>
> I look at the PCI DT code in powerpc and see a whole bunch of code that
> seems like it should be common. The different per arch pci structs
> complicates that. No one has really gotten to looking at PCI DT on ARM
> yet except you and Thierry for Tegra. We definitely don't want to create
> a 3rd copy. Starting the process of moving it to something like
> drivers/pci/pci-of.c would be great.

We have done pcie working on zynq and the same pcie host is working on Microblaze too.
There are just small differences. That's why I have sent another email
("Sharing PCIE driver between Microblaze and Arm zynq") to find out proper location.

PCI: Microblaze shares almost the same code with powerpc that's why I am definitely open
to move this code out of architecture.

Thanks,
Michal



-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian


More information about the Linuxppc-dev mailing list