[PATCH v2] powerpc: mpc5200: Add a3m071 board support
Stefan Roese
sr at denx.de
Thu Dec 6 20:30:10 EST 2012
This patch adds the MPC5200B based a3m071 board.
Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Anatolij Gustschin <agust at denx.de>
---
v2:
- Remove cdm at 200 DT node as it's not used
- Disable i2c controller in dts as its unused on this board
arch/powerpc/boot/dts/a3m071.dts | 144 +++++++++++++++++++++++++++
arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
2 files changed, 145 insertions(+)
create mode 100644 arch/powerpc/boot/dts/a3m071.dts
diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts
new file mode 100644
index 0000000..877a28c
--- /dev/null
+++ b/arch/powerpc/boot/dts/a3m071.dts
@@ -0,0 +1,144 @@
+/*
+ * a3m071 board Device Tree Source
+ *
+ * Copyright 2012 Stefan Roese <sr at denx.de>
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs at denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8 at semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+ model = "anonymous,a3m071";
+ compatible = "anonymous,a3m071";
+
+ soc5200 at f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; /* From boot loader */
+ system-frequency = <0>; /* From boot loader */
+
+ timer at 600 {
+ fsl,has-wdt;
+ };
+
+ spi at f00 {
+ status = "disabled";
+ };
+
+ usb: usb at 1000 {
+ status = "disabled";
+ };
+
+ psc at 2000 {
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ psc at 2200 {
+ status = "disabled";
+ };
+
+ psc at 2400 {
+ status = "disabled";
+ };
+
+ psc at 2600 {
+ status = "disabled";
+ };
+
+ psc at 2800 {
+ status = "disabled";
+ };
+
+ psc at 2c00 { // PSC6
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ ethernet at 3000 {
+ phy-handle = <&phy0>;
+ };
+
+ mdio at 3000 {
+ phy0: ethernet-phy at 3 {
+ reg = <0x03>;
+ };
+ };
+
+ ata at 3a00 {
+ status = "disabled";
+ };
+
+ i2c at 3d00 {
+ status = "disabled";
+ };
+
+ i2c at 3d40 {
+ status = "disabled";
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xfc000000 0x02000000
+ 3 0 0xe9000000 0x00080000
+ 5 0 0xe8000000 0x00010000>;
+
+ flash at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x0 0x02000000>;
+ compatible = "cfi-flash";
+ bank-width = <2>;
+ partition at 0x0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition at 0x00040000 {
+ label = "env";
+ reg = <0x00040000 0x00020000>;
+ };
+ partition at 0x00060000 {
+ label = "dtb";
+ reg = <0x00060000 0x00020000>;
+ };
+ partition at 0x00080000 {
+ label = "kernel";
+ reg = <0x00080000 0x00500000>;
+ };
+ partition at 0x00580000 {
+ label = "root";
+ reg = <0x00580000 0x00A80000>;
+ };
+ };
+
+ fpga at 3,0 {
+ compatible = "anonymous,a3m071-fpga";
+ reg = <3 0x0 0x00080000
+ 5 0x0 0x00010000>;
+ interrupts = <0 0 3>; /* level low */
+ };
+ };
+
+ pci at f0000d00 {
+ status = "disabled";
+ };
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index 9cf3602..792a301 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static const char *board[] __initdata = {
+ "anonymous,a3m071",
"anonymous,a4m072",
"anon,charon",
"ifm,o2d",
--
1.8.0.1
More information about the Linuxppc-dev
mailing list