[PATCH 18/20] powerpc/powernv: Add support for p5ioc2 PCI-X and PCIe
Benjamin Herrenschmidt
benh at kernel.crashing.org
Tue Sep 20 13:45:05 EST 2011
This adds support for PCI-X and PCIe on the p5ioc2 IO hub using
OPAL. This includes allocating & setting up TCE tables and config
space access routines.
This also supports fallbacks via RTAS when OPAL is absent, using
legacy TCE format pre-allocated via the device-tree (BML style)
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
arch/powerpc/platforms/powernv/Makefile | 2 +
arch/powerpc/platforms/powernv/pci-p5ioc2.c | 185 +++++++++++++++++
arch/powerpc/platforms/powernv/pci.c | 286 +++++++++++++++++++++++++++
arch/powerpc/platforms/powernv/pci.h | 38 ++++
arch/powerpc/platforms/powernv/powernv.h | 6 +
arch/powerpc/platforms/powernv/setup.c | 3 +-
6 files changed, 519 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/platforms/powernv/pci-p5ioc2.c
create mode 100644 arch/powerpc/platforms/powernv/pci.c
create mode 100644 arch/powerpc/platforms/powernv/pci.h
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 618ad83..cf9dec8 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,3 +2,5 @@ obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o
obj-y += opal-rtc.o opal-nvram.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o
+
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
new file mode 100644
index 0000000..afabc2b
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -0,0 +1,185 @@
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Currently supports only P5IOC2
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+/* For now, use a fixed amount of TCE memory for each p5ioc2
+ * hub, 16M will do
+ */
+#define P5IOC2_TCE_MEMORY 0x01000000
+
+static void __devinit pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb,
+ struct pci_dev *pdev)
+{
+ if (phb->p5ioc2.iommu_table.it_map == NULL)
+ iommu_init_table(&phb->p5ioc2.iommu_table, phb->hose->node);
+
+ set_iommu_table_base(&pdev->dev, &phb->p5ioc2.iommu_table);
+}
+
+static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np,
+ void *tce_mem, u64 tce_size)
+{
+ struct pnv_phb *phb;
+ const u64 *prop64;
+ u64 phb_id;
+ int64_t rc;
+ static int primary = 1;
+
+ pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name);
+
+ prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
+ if (!prop64) {
+ pr_err(" Missing \"ibm,opal-phbid\" property !\n");
+ return;
+ }
+ phb_id = be64_to_cpup(prop64);
+ pr_devel(" PHB-ID : 0x%016llx\n", phb_id);
+ pr_devel(" TCE AT : 0x%016lx\n", __pa(tce_mem));
+ pr_devel(" TCE SZ : 0x%016llx\n", tce_size);
+
+ rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size);
+ if (rc != OPAL_SUCCESS) {
+ pr_err(" Failed to set TCE memory, OPAL error %lld\n", rc);
+ return;
+ }
+
+ phb = alloc_bootmem(sizeof(struct pnv_phb));
+ if (phb) {
+ memset(phb, 0, sizeof(struct pnv_phb));
+ phb->hose = pcibios_alloc_controller(np);
+ }
+ if (!phb || !phb->hose) {
+ pr_err(" Failed to allocate PCI controller\n");
+ return;
+ }
+
+ spin_lock_init(&phb->lock);
+ phb->hose->first_busno = 0;
+ phb->hose->last_busno = 0xff;
+ phb->hose->private_data = phb;
+ phb->opal_id = phb_id;
+ phb->type = PNV_PHB_P5IOC2;
+
+ phb->regs = of_iomap(np, 0);
+
+ if (phb->regs == NULL)
+ pr_err(" Failed to map registers !\n");
+ else {
+ pr_devel(" P_BUID = 0x%08x\n", in_be32(phb->regs + 0x100));
+ pr_devel(" P_IOSZ = 0x%08x\n", in_be32(phb->regs + 0x1b0));
+ pr_devel(" P_IO_ST = 0x%08x\n", in_be32(phb->regs + 0x1e0));
+ pr_devel(" P_MEM1_H = 0x%08x\n", in_be32(phb->regs + 0x1a0));
+ pr_devel(" P_MEM1_L = 0x%08x\n", in_be32(phb->regs + 0x190));
+ pr_devel(" P_MSZ1_L = 0x%08x\n", in_be32(phb->regs + 0x1c0));
+ pr_devel(" P_MEM_ST = 0x%08x\n", in_be32(phb->regs + 0x1d0));
+ pr_devel(" P_MEM2_H = 0x%08x\n", in_be32(phb->regs + 0x2c0));
+ pr_devel(" P_MEM2_L = 0x%08x\n", in_be32(phb->regs + 0x2b0));
+ pr_devel(" P_MSZ2_H = 0x%08x\n", in_be32(phb->regs + 0x2d0));
+ pr_devel(" P_MSZ2_L = 0x%08x\n", in_be32(phb->regs + 0x2e0));
+ }
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(phb->hose, np, primary);
+ primary = 0;
+
+ phb->hose->ops = &pnv_pci_ops;
+
+ /* Setup TCEs */
+ phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup;
+ pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table,
+ tce_mem, tce_size, 0);
+}
+
+void __init pnv_pci_init_p5ioc2_hub(struct device_node *np)
+{
+ struct device_node *phbn;
+ const u64 *prop64;
+ u64 hub_id;
+ void *tce_mem;
+ uint64_t tce_per_phb;
+ int64_t rc;
+ int phb_count = 0;
+
+ pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name);
+
+ prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
+ if (!prop64) {
+ pr_err(" Missing \"ibm,opal-hubid\" property !\n");
+ return;
+ }
+ hub_id = be64_to_cpup(prop64);
+ pr_info(" HUB-ID : 0x%016llx\n", hub_id);
+
+ /* Currently allocate 16M of TCE memory for every Hub
+ *
+ * XXX TODO: Make it chip local if possible
+ */
+ tce_mem = __alloc_bootmem(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY,
+ __pa(MAX_DMA_ADDRESS));
+ if (!tce_mem) {
+ pr_err(" Failed to allocate TCE Memory !\n");
+ return;
+ }
+ pr_debug(" TCE : 0x%016lx..0x%016lx\n",
+ __pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1);
+ rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem),
+ P5IOC2_TCE_MEMORY);
+ if (rc != OPAL_SUCCESS) {
+ pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc);
+ return;
+ }
+
+ /* Count child PHBs */
+ for_each_child_of_node(np, phbn) {
+ if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
+ of_device_is_compatible(phbn, "ibm,p5ioc2-pciex"))
+ phb_count++;
+ }
+
+ /* Calculate how much TCE space we can give per PHB */
+ tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count);
+ pr_info(" Allocating %lld MB of TCE memory per PHB\n",
+ tce_per_phb >> 20);
+
+ /* Initialize PHBs */
+ for_each_child_of_node(np, phbn) {
+ if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
+ of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) {
+ pnv_pci_init_p5ioc2_phb(phbn, tce_mem, tce_per_phb);
+ tce_mem += tce_per_phb;
+ }
+ }
+}
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
new file mode 100644
index 0000000..b512489
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -0,0 +1,286 @@
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Currently supports only P5IOC2
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+
+#define cfg_dbg(fmt...) do { } while(0)
+//#define cfg_dbg(fmt...) printk(fmt)
+
+
+static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
+ u32 bdfn)
+{
+ s64 rc;
+ u8 fstate;
+ u16 pcierr;
+ u32 pe_no;
+
+ /* Get PE# if we support IODA */
+ pe_no = phb->bdfn_to_pe ? phb->bdfn_to_pe(phb, bus, bdfn & 0xff) : 0;
+
+ /* Read freeze status */
+ rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
+ NULL);
+ if (rc) {
+ pr_warning("PCI %d: Failed to read EEH status for PE#%d,"
+ " err %lld\n", phb->hose->global_number, pe_no, rc);
+ return;
+ }
+ cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
+ bdfn, pe_no, fstate);
+ if (fstate != 0) {
+ rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ if (rc) {
+ pr_warning("PCI %d: Failed to clear EEH freeze state"
+ " for PE#%d, err %lld\n",
+ phb->hose->global_number, pe_no, rc);
+ }
+ }
+}
+
+static int pnv_pci_read_config(struct pci_bus *bus,
+ unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pnv_phb *phb = hose->private_data;
+ u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
+ s64 rc;
+
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (size) {
+ case 1: {
+ u8 v8;
+ rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8);
+ *val = (rc == OPAL_SUCCESS) ? v8 : 0xff;
+ break;
+ }
+ case 2: {
+ u16 v16;
+ rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
+ &v16);
+ *val = (rc == OPAL_SUCCESS) ? v16 : 0xffff;
+ break;
+ }
+ case 4: {
+ u32 v32;
+ rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
+ *val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff;
+ break;
+ }
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+ cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n",
+ bus->number, devfn, where, size, *val);
+
+ /* Check if the PHB got frozen due to an error (no response) */
+ pnv_pci_config_check_eeh(phb, bus, bdfn);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pnv_pci_write_config(struct pci_bus *bus,
+ unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pnv_phb *phb = hose->private_data;
+ u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
+
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n",
+ bus->number, devfn, where, size, val);
+ switch (size) {
+ case 1:
+ opal_pci_config_write_byte(phb->opal_id, bdfn, where, val);
+ break;
+ case 2:
+ opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val);
+ break;
+ case 4:
+ opal_pci_config_write_word(phb->opal_id, bdfn, where, val);
+ break;
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+ /* Check if the PHB got frozen due to an error (no response) */
+ pnv_pci_config_check_eeh(phb, bus, bdfn);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops pnv_pci_ops = {
+ .read = pnv_pci_read_config,
+ .write = pnv_pci_write_config,
+};
+
+static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
+ unsigned long uaddr, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ u64 proto_tce;
+ u64 *tcep;
+ u64 rpn;
+
+ proto_tce = TCE_PCI_READ; // Read allowed
+
+ if (direction != DMA_TO_DEVICE)
+ proto_tce |= TCE_PCI_WRITE;
+
+ tcep = ((u64 *)tbl->it_base) + index;
+
+ while (npages--) {
+ /* can't move this out since we might cross LMB boundary */
+ rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+ *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+
+ uaddr += TCE_PAGE_SIZE;
+ tcep++;
+ }
+ return 0;
+}
+
+static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
+{
+ u64 *tcep = ((u64 *)tbl->it_base) + index;
+
+ while (npages--)
+ *(tcep++) = 0;
+}
+
+void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
+ void *tce_mem, u64 tce_size,
+ u64 dma_offset)
+{
+ tbl->it_blocksize = 16;
+ tbl->it_base = (unsigned long)tce_mem;
+ tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT;
+ tbl->it_index = 0;
+ tbl->it_size = tce_size >> 3;
+ tbl->it_busno = 0;
+ tbl->it_type = TCE_PCI;
+}
+
+static struct iommu_table * __devinit
+pnv_pci_setup_bml_iommu(struct pci_controller *hose)
+{
+ struct iommu_table *tbl;
+ const __be64 *basep;
+ const __be32 *sizep;
+
+ basep = of_get_property(hose->dn, "linux,tce-base", NULL);
+ sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
+ if (basep == NULL || sizep == NULL) {
+ pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name);
+ return NULL;
+ }
+ tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
+ if (WARN_ON(!tbl))
+ return NULL;
+ pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
+ be32_to_cpup(sizep), 0);
+ iommu_init_table(tbl, hose->node);
+ return tbl;
+}
+
+static void __devinit pnv_pci_dma_fallback_setup(struct pci_controller *hose,
+ struct pci_dev *pdev)
+{
+ struct device_node *np = pci_bus_to_OF_node(hose->bus);
+ struct pci_dn *pdn;
+
+ if (np == NULL)
+ return;
+ pdn = PCI_DN(np);
+ if (!pdn->iommu_table)
+ pdn->iommu_table = pnv_pci_setup_bml_iommu(hose);
+ if (!pdn->iommu_table)
+ return;
+ set_iommu_table_base(&pdev->dev, pdn->iommu_table);
+}
+
+static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
+
+ /* If we have no phb structure, try to setup a fallback based on
+ * the device-tree (RTAS PCI for example)
+ */
+ if (phb && phb->dma_dev_setup)
+ phb->dma_dev_setup(phb, pdev);
+ else
+ pnv_pci_dma_fallback_setup(hose, pdev);
+}
+
+void __init pnv_pci_init(void)
+{
+ struct device_node *np;
+
+ pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN);
+
+ /* We do not want to just probe */
+ pci_probe_only = 0;
+
+ /* OPAL absent, try POPAL first then RTAS detection of PHBs */
+ if (!firmware_has_feature(FW_FEATURE_OPAL)) {
+#ifdef CONFIG_PPC_POWERNV_RTAS
+ init_pci_config_tokens();
+ find_and_init_phbs();
+#endif /* CONFIG_PPC_POWERNV_RTAS */
+ } else {
+ /* OPAL is here, do our normal stuff */
+
+ /* Look for p5ioc2 IO-Hubs */
+ for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+ pnv_pci_init_p5ioc2_hub(np);
+ }
+
+ /* Setup the linkage between OF nodes and PHBs */
+ pci_devs_phb_init();
+
+ /* Configure IOMMU DMA hooks */
+ ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
+ ppc_md.tce_build = pnv_tce_build;
+ ppc_md.tce_free = pnv_tce_free;
+ set_pci_dma_ops(&dma_iommu_ops);
+
+}
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
new file mode 100644
index 0000000..b8be721
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -0,0 +1,38 @@
+#ifndef __POWERNV_PCI_H
+#define __POWERNV_PCI_H
+
+struct pci_dn;
+
+enum pnv_phb_type {
+ PNV_PHB_P5IOC2,
+ PNV_PHB_IODA1,
+ PNV_PHB_IODA2,
+};
+
+struct pnv_phb {
+ struct pci_controller *hose;
+ enum pnv_phb_type type;
+ u64 opal_id;
+ void __iomem *regs;
+ spinlock_t lock;
+
+ void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
+ void (*fixup_phb)(struct pci_controller *hose);
+ u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
+
+ union {
+ struct {
+ struct iommu_table iommu_table;
+ } p5ioc2;
+ };
+};
+
+extern struct pci_ops pnv_pci_ops;
+
+extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
+ void *tce_mem, u64 tce_size,
+ u64 dma_offset);
+extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
+
+
+#endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
index 35b7160..8a9df7f 100644
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -7,4 +7,10 @@ extern void pnv_smp_init(void);
static inline void pnv_smp_init(void) { }
#endif
+#ifdef CONFIG_PCI
+extern void pnv_pci_init(void);
+#else
+static inline void pnv_pci_init(void) { }
+#endif
+
#endif /* _POWERNV_H */
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index f0242f3..467bd4a 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -40,7 +40,8 @@ static void __init pnv_setup_arch(void)
/* Initialize SMP */
pnv_smp_init();
- /* XXX PCI */
+ /* Setup PCI */
+ pnv_pci_init();
/* Setup RTC and NVRAM callbacks */
if (firmware_has_feature(FW_FEATURE_OPAL))
--
1.7.4.1
More information about the Linuxppc-dev
mailing list