[PATCH] [v2] powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards

[Kumar Gala]

On Sep 14, 2011, at 4:42 PM, Timur Tabi wrote:

> Standarize and document the FPGA nodes used on Freescale QorIQ reference
> boards.  There are different kinds of FPGAs used on the boards, but
> only two are currently standard: "pixis" and "qixis".  Although there are
> minor differences among the boards that have one kind of FPGA, most of the
> functionality is the same, so it makes sense to create common compatibility
> strings.
> 
> Signed-off-by: Timur Tabi <timur at freescale.com>
> ---
> 
> v2: removed references to the CPLD
> 
> This patch applies on top of "[PATCH 3/4] powerpc/p3060qds: Add support for
> P3060QDS board", but it also assumes that the 'ranges' property for the
> localbus node on the P3060QDS device tree includes the missing line for
> the NAND devices.
> 
> .../devicetree/bindings/powerpc/fsl/board.txt      |   30 ++++++++++++--------
> arch/powerpc/boot/dts/p1022ds.dts                  |    2 +-
> arch/powerpc/boot/dts/p2020ds.dts                  |    5 +++
> arch/powerpc/boot/dts/p3041ds.dts                  |    4 +-
> arch/powerpc/boot/dts/p3060qds.dts                 |    8 ++++-
> arch/powerpc/boot/dts/p4080ds.dts                  |    8 ++++-
> arch/powerpc/boot/dts/p5020ds.dts                  |    4 +-
> 7 files changed, 42 insertions(+), 19 deletions(-)

What happened to looking at pixis vs ngpixis ?

- k