[PATCH] Do not hide resource for pci/pcie when configured as Agent/EP

[Jia Hongtao]

From: Jason Jin <Jason.jin at freescale.com>

Current pci/pcie init code will hide the pci/pcie host resource.
But did not judge it is host/RC or agent/EP. If configured as
agent/EP, we should avoid hiding its resource in the host side.

In PCI system, the Programing Interface can be used to judge the
host/agent status:
Programing Interface = 0: host
Programing Interface = 1: Agent

In PCIE system, both the Programing Interface and Header type can
be used to judge the RC/EP status.
Header Type = 0: EP
Header Type = 1: RC

Signed-off-by: Jason Jin <Jason.jin at freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.hu at freescale.com>
Signed-off-by: Jia Hongtao <B38951 at freescale.com>
Signed-off-by: Li Yang <leoli at freescale.com>
---
 arch/powerpc/kernel/pci-common.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 4f134132c..bc61a69 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1732,10 +1732,13 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose)
 static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
 {
 	int i, class = dev->class >> 8;
+	/* When configured as agent, programing interface = 1 */
+	int prog_if = dev->class & 0xf;
 
 	if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
 	     class == PCI_CLASS_BRIDGE_OTHER) &&
 		(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
+		(prog_if == 0) &&
 		(dev->bus->parent == NULL)) {
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
-- 
1.7.5.1