[PATCH 09/11] powerpc/85xx: Rework P1020 SoC device tree

Kumar Gala galak at kernel.crashing.org
Sun Oct 23 08:20:50 EST 2011


Split the P1020 SoC device tree into what we can include as a 'prefix'
to the board device tree and what needs to be included as a 'postfix'.

This allows use more re-use and less duplication between various board
device tree configurations (32-bit address map vs 36-bit address map).

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
 arch/powerpc/boot/dts/fsl/p1020si-post.dtsi |  229 +++++++++++++++
 arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi  |   68 +++++
 arch/powerpc/boot/dts/p1020si.dtsi          |  407 ---------------------------
 3 files changed, 297 insertions(+), 407 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
 delete mode 100644 arch/powerpc/boot/dts/p1020si.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 0000000..74538a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,229 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie at 0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie at 0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1020-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law at 0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm at 1000 {
+		compatible = "fsl,p1020-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller at 2000 {
+		compatible = "fsl,p1020-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	i2c0: i2c at 3000 {
+	};
+
+	i2c1: i2c at 3100 {
+	};
+
+	serial0: serial at 4500 {
+	};
+
+	serial1: serial at 4600 {
+	};
+
+	spi0: spi at 7000 {
+	};
+
+	gpio0: gpio-controller at f000 {
+	};
+
+	L2: l2-cache-controller at 20000 {
+		compatible = "fsl,p1020-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+	dma0: dma at 21300 {
+	};
+
+	mdio0: mdio at 24000 {
+	};
+
+	mdio1: mdio at 25000 {
+	};
+
+	mdio2: mdio at 26000 {
+	};
+
+	enet0: ethernet at b0000 {
+	};
+
+	enet1: ethernet at b1000 {
+	};
+
+	enet2: ethernet at b2000 {
+	};
+
+	usb at 22000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl-usb2-dr";
+		reg = <0x22000 0x1000>;
+		interrupts = <28 0x2 0 0>;
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb at 23000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl-usb2-dr";
+		reg = <0x23000 0x1000>;
+		interrupts = <46 0x2 0 0>;
+		phy_type = "ulpi";
+	};
+	*/
+
+	sdhc0: sdhc at 2e000 {
+	};
+
+	crypto: crypto at 30000 {
+	};
+
+	mpic: pic at 40000 {
+	};
+
+	timerA: timer at 41100 {
+	};
+
+	timerB: timer at 42100 {
+	};
+
+	msiA: msi at 41600 {
+	};
+
+	global-utilities at e0000 {
+		compatible = "fsl,p1020-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+/include/ "pq3-etsec2-0.dtsi"
+/include/ "pq3-etsec2-1.dtsi"
+/include/ "pq3-etsec2-2.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 0000000..6f0376e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020 at 0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020 at 1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
deleted file mode 100644
index b08c848..0000000
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * P1020si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	compatible = "fsl,P1020";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1020 at 0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1020 at 1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	localbus at ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2 0 0>;
-	};
-
-	soc at ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p1020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law at 0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm at 1000 {
-			compatible = "fsl,p1020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2 0 0>;
-		};
-
-		memory-controller at 2000 {
-			compatible = "fsl,p1020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupts = <16 2 0 0>;
-		};
-
-		i2c at 3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2 0 0>;
-			dfsrr;
-		};
-
-		i2c at 3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2 0 0>;
-			dfsrr;
-		};
-
-		serial0: serial at 4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2 0 0>;
-		};
-
-		serial1: serial at 4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2 0 0>;
-		};
-
-		spi at 7000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2 0 0>;
-			fsl,espi-num-chipselects = <4>;
-		};
-
-		gpio: gpio-controller at f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2 0 0>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller at 20000 {
-			compatible = "fsl,p1020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2,256K
-			interrupts = <16 2 0 0>;
-		};
-
-		dma at 21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel at 0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <20 2 0 0>;
-			};
-			dma-channel at 80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <21 2 0 0>;
-			};
-			dma-channel at 100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <22 2 0 0>;
-			};
-			dma-channel at 180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <23 2 0 0>;
-			};
-		};
-
-		mdio at 24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x24000 0x1000 0xb0030 0x4>;
-
-		};
-
-		mdio at 25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-tbi";
-			reg = <0x25000 0x1000 0xb1030 0x4>;
-
-		};
-
-		enet0: ethernet at b0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			fsl,magic-packet;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-
-			queue-group at 0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb0000 0x1000>;
-				interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
-			};
-
-			queue-group at 1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb4000 0x1000>;
-				interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
-			};
-		};
-
-		enet1: ethernet at b1000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			fsl,magic-packet;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-
-			queue-group at 0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb1000 0x1000>;
-				interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
-			};
-
-			queue-group at 1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb5000 0x1000>;
-				interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
-			};
-		};
-
-		enet2: ethernet at b2000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			fsl,magic-packet;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-
-			queue-group at 0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb2000 0x1000>;
-				interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
-			};
-
-			queue-group at 1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb6000 0x1000>;
-				interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
-			};
-		};
-
-		usb at 22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupts = <28 0x2 0 0>;
-		};
-
-		/* USB2 is shared with localbus, so it must be disabled
-		   by default. We can't put 'status = "disabled";' here
-		   since U-Boot doesn't clear the status property when
-		   it enables USB2. OTOH, U-Boot does create a new node
-		   when there isn't any. So, just comment it out.
-		usb at 23000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			interrupts = <46 0x2 0 0>;
-			phy_type = "ulpi";
-		};
-		*/
-
-		sdhci at 2e000 {
-			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2 0 0>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto at 30000 {
-			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
-				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
-				     "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 0 0 58 2 0 0>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x97c>;
-			fsl,descriptor-types-mask = <0x3a30abf>;
-		};
-
-		mpic: pic at 40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		timer at 41100 {
-			compatible = "fsl,mpic-global-timer";
-			reg = <0x41100 0x100 0x41300 4>;
-			interrupts = <0 0 3 0
-			              1 0 3 0
-			              2 0 3 0
-			              3 0 3 0>;
-		};
-
-		timer at 42100 {
-			compatible = "fsl,mpic-global-timer";
-			reg = <0x42100 0x100 0x42300 4>;
-			interrupts = <4 0 3 0
-			              5 0 3 0
-			              6 0 3 0
-			              7 0 3 0>;
-		};
-
-		msi at 41600 {
-			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-
-		global-utilities at e0000 {	//global utilities block
-			compatible = "fsl,p1020-guts","fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie at ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupts = <16 2 0 0>;
-
-		pcie at 0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 0 0>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0x0 0x0 0x1 &mpic 0x4 0x1
-				0000 0x0 0x0 0x2 &mpic 0x5 0x1
-				0000 0x0 0x0 0x3 &mpic 0x6 0x1
-				0000 0x0 0x0 0x4 &mpic 0x7 0x1
-				>;
-		};
-
-	};
-
-	pci1: pcie at ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupts = <16 2 0 0>;
-
-		pcie at 0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 0 0>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0x0 0x0 0x1 &mpic 0x0 0x1
-				0000 0x0 0x0 0x2 &mpic 0x1 0x1
-				0000 0x0 0x0 0x3 &mpic 0x2 0x1
-				0000 0x0 0x0 0x4 &mpic 0x3 0x1
-				>;
-		};
-	};
-};
-- 
1.7.3.4



More information about the Linuxppc-dev mailing list