[PATCH 04/11] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB
Kumar Gala
galak at kernel.crashing.org
Sun Oct 23 08:20:45 EST 2011
The SPI node is out of date with regards to the binding for fsl-espi and
driver support.
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 30 +++++++++++++-----------------
arch/powerpc/boot/dts/p1020si.dtsi | 5 ++---
2 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index 8b1a7ee..b31e7ec 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -149,49 +149,45 @@
};
spi at 7000 {
-
- fsl_m25p80 at 0 {
+ flash at 0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
- partition at 0 {
+ partition at u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
+ label = "u-boot";
read-only;
};
- partition at 80000 {
+ partition at dtb {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
+ label = "dtb";
read-only;
};
- partition at 100000 {
+ partition at kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
+ label = "kernel";
read-only;
};
- partition at 500000 {
+ partition at fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
+ label = "file system";
read-only;
};
- partition at 900000 {
+ partition at jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
+ label = "file system jffs2";
};
};
};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 58f6b30..25e10cf 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -112,14 +112,13 @@
};
spi at 7000 {
- cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,espi";
+ compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2>;
interrupt-parent = <&mpic>;
- mode = "cpu";
+ fsl,espi-num-chipselects = <4>;
};
gpio: gpio-controller at f000 {
--
1.7.3.4
More information about the Linuxppc-dev
mailing list