[PATCH 1/2] [hw-breakpoint] Use generic hw-breakpoint interfaces for new PPC ptrace flags
K.Prasad
prasad at linux.vnet.ibm.com
Thu Oct 13 04:39:48 EST 2011
On Wed, Oct 12, 2011 at 02:33:59PM +1100, David Gibson wrote:
> On Fri, Sep 16, 2011 at 12:57:10PM +0530, K.Prasad wrote:
> > On Fri, Aug 26, 2011 at 03:05:52PM +0530, K.Prasad wrote:
> > > On Wed, Aug 24, 2011 at 01:59:39PM +1000, David Gibson wrote:
> > > > On Tue, Aug 23, 2011 at 02:55:13PM +0530, K.Prasad wrote:
> > > > > On Tue, Aug 23, 2011 at 03:08:50PM +1000, David Gibson wrote:
> > > > > > On Fri, Aug 19, 2011 at 01:21:36PM +0530, K.Prasad wrote:
[snipped]
> > [hw-breakpoint] Use generic hw-breakpoint interfaces for new PPC ptrace flags
> >
> > PPC_PTRACE_GETHWDBGINFO, PPC_PTRACE_SETHWDEBUG and PPC_PTRACE_DELHWDEBUG are
> > PowerPC specific ptrace flags that use the watchpoint register. While they are
> > targeted primarily towards BookE users, user-space applications such as GDB
> > have started using them for BookS too.
> >
> > This patch enables the use of generic hardware breakpoint interfaces for these
> > new flags. The version number of the associated data structures
> > "ppc_hw_breakpoint" and "ppc_debug_info" is incremented to denote new semantics.
>
> Above pargraph needs revision.
>
>
Sure, done.
> > Apart from the usual benefits of using generic hw-breakpoint interfaces, these
> > changes allow debuggers (such as GDB) to use a common set of ptrace flags for
> > their watchpoint needs and allow more precise breakpoint specification (length
> > of the variable can be specified).
> >
> > [Edjunior: Identified an issue in the patch with the sanity check for version
> > numbers]
> >
> > Tested-by: Edjunior Barbosa Machado <emachado at linux.vnet.ibm.com>
> > Signed-off-by: K.Prasad <prasad at linux.vnet.ibm.com>
> >
> > diff --git a/Documentation/powerpc/ptrace.txt b/Documentation/powerpc/ptrace.txt
> > index f4a5499..04656ec 100644
> > --- a/Documentation/powerpc/ptrace.txt
> > +++ b/Documentation/powerpc/ptrace.txt
> > @@ -127,6 +127,22 @@ Some examples of using the structure to:
> > p.addr2 = (uint64_t) end_range;
> > p.condition_value = 0;
> >
> > +- set a watchpoint in server processors (BookS)
> > +
> > + p.version = 1;
> > + p.trigger_type = PPC_BREAKPOINT_TRIGGER_RW;
> > + p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
> > + or
> > + p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_EXACT;
>
> MODE_RANGE_EXACT? Shouldn't that just be MODE_EXACT?
>
That was silly. Thanks for pointing it out.
> > +
> > + p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
> > + p.addr = (uint64_t) begin_range;
> > + /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
> > + * addr2 - addr <= 8 Bytes.
> > + */
> > + p.addr2 = (uint64_t) end_range;
> > + p.condition_value = 0;
> > +
> > 3. PTRACE_DELHWDEBUG
> >
> > Takes an integer which identifies an existing breakpoint or watchpoint
> > diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
> > index 05b7dd2..2449495 100644
> > --- a/arch/powerpc/kernel/ptrace.c
> > +++ b/arch/powerpc/kernel/ptrace.c
> > @@ -1339,6 +1339,12 @@ static int set_dac_range(struct task_struct *child,
> > static long ppc_set_hwdebug(struct task_struct *child,
> > struct ppc_hw_breakpoint *bp_info)
> > {
> > +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> > + int ret, len = 0;
> > + struct thread_struct *thread = &(child->thread);
> > + struct perf_event *bp;
> > + struct perf_event_attr attr;
> > +#endif /* CONFIG_HAVE_HW_BREAKPOINT */
> > #ifndef CONFIG_PPC_ADV_DEBUG_REGS
> > unsigned long dabr;
> > #endif
> > @@ -1382,13 +1388,9 @@ static long ppc_set_hwdebug(struct task_struct *child,
> > */
> > if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
> > (bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
> > - bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT ||
> > bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
> > return -EINVAL;
> >
> > - if (child->thread.dabr)
> > - return -ENOSPC;
> > -
> > if ((unsigned long)bp_info->addr >= TASK_SIZE)
> > return -EIO;
> >
> > @@ -1398,15 +1400,83 @@ static long ppc_set_hwdebug(struct task_struct *child,
> > dabr |= DABR_DATA_READ;
> > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
> > dabr |= DABR_DATA_WRITE;
> > +#ifdef CONFIG_HAVE_HW_BREAKPOINT
> > + if (ptrace_get_breakpoints(child) < 0)
> > + return -ESRCH;
> >
> > - child->thread.dabr = dabr;
> > + bp = thread->ptrace_bps[0];
> > + if (!bp_info->addr) {
>
> I think this is treating a hardware breakpoint at address 0 as if it
> didn't exist. That seems wrong.
>
Yes, I think the above the condition need not exist after we've agreed
that 0 is a valid address to set breakpoint upon. One needs to use
PPC_PTRACE_DELHWDEBUG to delete a breakpoint and not by writing 0 (as
done with PTRACE_SET_DEBUGREG).
I'll remove that.
> > + if (bp) {
> > + unregister_hw_breakpoint(bp);
> > + thread->ptrace_bps[0] = NULL;
> > + }
> > + ptrace_put_breakpoints(child);
> > + return 0;
> > + }
> > + /*
> > + * Check if the request is for 'range' breakpoints. We can
> > + * support it if range < 8 bytes.
> > + */
> > + if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
> > + len = bp_info->addr2 - bp_info->addr;
> > + else if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
> > + ptrace_put_breakpoints(child);
> > + return -EINVAL;
> > + }
>
> Misindent here. This statement would be clearer if you had {} on all
> of the if branches.
>
Okay, done.
> > + if (bp) {
> > + attr = bp->attr;
> > + attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
> > + arch_bp_generic_fields(dabr &
> > + (DABR_DATA_WRITE | DABR_DATA_READ),
> > + &attr.bp_type);
> > + attr.bp_len = len;
>
> If gdb is using the new breakpoint interface, surely it should just
> use it, rather than doing this bit frobbing as in the old SET_DABR
> call.
>
I understand that you wanted to avoid this duplication of effort in terms
of encoding and decoding the breakpoint type from
PPC_BREAKPOINT_TRIGGER_READ to DABR_DATA_READ to HW_BREAKPOINT_R.
However HW_BREAKPOINT_R is a generic definition used across
architectures, DABR_DATA_READ is used in the !CONFIG_HAVE_HW_BREAKPOINT
case while PPC_BREAKPOINT_TRIGGER_READ is used in
CONFIG_PPC_ADV_DEBUG_REGS case.
While we could define PPC_BREAKPOINT_TRIGGER_READ and DABR_DATA_READ to
the same value it may not result in any code savings (since the bit
translation is done for !CONFIG_HAVE_HW_BREAKPOINT case anyway). So, I
think it is best left the way it is.
I'm attaching the revised patch (after incorporating your comments).
Kindly let me know your comments.
Thanks,
K.Prasad
---------
[hw-breakpoint] Use generic hw-breakpoint interfaces for new PPC ptrace flags
PPC_PTRACE_GETHWDBGINFO, PPC_PTRACE_SETHWDEBUG and PPC_PTRACE_DELHWDEBUG are
PowerPC specific ptrace flags that use the watchpoint register. While they are
targeted primarily towards BookE users, user-space applications such as GDB
have started using them for BookS too. This patch enables the use of generic
hardware breakpoint interfaces for these new flags.
Apart from the usual benefits of using generic hw-breakpoint interfaces, these
changes allow debuggers (such as GDB) to use a common set of ptrace flags for
their watchpoint needs and allow more precise breakpoint specification (length
of the variable can be specified).
Tested-by: Edjunior Barbosa Machado <emachado at linux.vnet.ibm.com>
Signed-off-by: K.Prasad <prasad at linux.vnet.ibm.com>
---
Documentation/powerpc/ptrace.txt | 16 +++++++
arch/powerpc/kernel/ptrace.c | 88 +++++++++++++++++++++++++++++++++++---
2 files changed, 98 insertions(+), 6 deletions(-)
diff --git a/Documentation/powerpc/ptrace.txt b/Documentation/powerpc/ptrace.txt
index f4a5499..f2a7a39 100644
--- a/Documentation/powerpc/ptrace.txt
+++ b/Documentation/powerpc/ptrace.txt
@@ -127,6 +127,22 @@ Some examples of using the structure to:
p.addr2 = (uint64_t) end_range;
p.condition_value = 0;
+- set a watchpoint in server processors (BookS)
+
+ p.version = 1;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_RW;
+ p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+ or
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) begin_range;
+ /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
+ * addr2 - addr <= 8 Bytes.
+ */
+ p.addr2 = (uint64_t) end_range;
+ p.condition_value = 0;
+
3. PTRACE_DELHWDEBUG
Takes an integer which identifies an existing breakpoint or watchpoint
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 05b7dd2..be5dc57 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -1339,6 +1339,12 @@ static int set_dac_range(struct task_struct *child,
static long ppc_set_hwdebug(struct task_struct *child,
struct ppc_hw_breakpoint *bp_info)
{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int ret, len = 0;
+ struct thread_struct *thread = &(child->thread);
+ struct perf_event *bp;
+ struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#ifndef CONFIG_PPC_ADV_DEBUG_REGS
unsigned long dabr;
#endif
@@ -1382,13 +1388,9 @@ static long ppc_set_hwdebug(struct task_struct *child,
*/
if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
(bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
- bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT ||
bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
return -EINVAL;
- if (child->thread.dabr)
- return -ENOSPC;
-
if ((unsigned long)bp_info->addr >= TASK_SIZE)
return -EIO;
@@ -1398,15 +1400,75 @@ static long ppc_set_hwdebug(struct task_struct *child,
dabr |= DABR_DATA_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
dabr |= DABR_DATA_WRITE;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
- child->thread.dabr = dabr;
+ /*
+ * Check if the request is for 'range' breakpoints. We can
+ * support it if range < 8 bytes.
+ */
+ if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) {
+ len = bp_info->addr2 - bp_info->addr;
+ } else if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
+ ptrace_put_breakpoints(child);
+ return -EINVAL;
+ }
+ bp = thread->ptrace_bps[0];
+ if (bp) {
+ attr = bp->attr;
+ attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
+ arch_bp_generic_fields(dabr &
+ (DABR_DATA_WRITE | DABR_DATA_READ),
+ &attr.bp_type);
+ attr.bp_len = len;
+ ret = modify_user_hw_breakpoint(bp, &attr);
+ if (ret) {
+ ptrace_put_breakpoints(child);
+ return ret;
+ }
+ thread->ptrace_bps[0] = bp;
+ ptrace_put_breakpoints(child);
+ thread->dabr = dabr;
+ return 0;
+ }
+
+ /* Create a new breakpoint request if one doesn't exist already */
+ hw_breakpoint_init(&attr);
+ attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
+ attr.bp_len = len;
+ arch_bp_generic_fields(dabr & (DABR_DATA_WRITE | DABR_DATA_READ),
+ &attr.bp_type);
+
+ thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+ ptrace_triggered, NULL, child);
+ if (IS_ERR(bp)) {
+ thread->ptrace_bps[0] = NULL;
+ ptrace_put_breakpoints(child);
+ return PTR_ERR(bp);
+ }
+ ptrace_put_breakpoints(child);
+ return 1;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+ if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
+ return -EINVAL;
+
+ if (child->thread.dabr)
+ return -ENOSPC;
+
+ child->thread.dabr = dabr;
return 1;
#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
}
static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ struct thread_struct *thread = &(child->thread);
+ struct perf_event *bp;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
int rc;
@@ -1426,10 +1488,24 @@ static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
#else
if (data != 1)
return -EINVAL;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ if (ptrace_get_breakpoints(child) < 0)
+ return -ESRCH;
+
+ bp = thread->ptrace_bps[0];
+ if (bp) {
+ unregister_hw_breakpoint(bp);
+ thread->ptrace_bps[0] = NULL;
+ }
+ ptrace_put_breakpoints(child);
+ return 0;
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
if (child->thread.dabr == 0)
return -ENOENT;
child->thread.dabr = 0;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
return 0;
#endif
@@ -1560,7 +1636,7 @@ long arch_ptrace(struct task_struct *child, long request,
dbginfo.data_bp_alignment = 4;
#endif
dbginfo.sizeof_condition = 0;
- dbginfo.features = 0;
+ dbginfo.features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
if (!access_ok(VERIFY_WRITE, datavp,
--
1.7.4.1
More information about the Linuxppc-dev
mailing list