[PATCH v14 10/10] USB/ppc4xx:Synopsys DWC OTG driver enable gadget support

[Sergei Shtylyov]

Hello.

On 07-10-2011 6:31, tmarri at apm.com wrote:

> From: Tirumala Marri<tmarri at apm.com>

> Enable gadget support

> Signed-off-by: Tirumala R Marri<tmarri at apm.com>
> Signed-off-by: Fushen Chen<fchen at apm.com>
> Signed-off-by: Mark Miesfeld<mmiesfeld at apm.com>
[...]

> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index 5a084b9..5f1f89f 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -316,6 +316,17 @@ config USB_GADGET_MUSB_HDRC
>   	  This OTG-capable silicon IP is used in dual designs including
>   	  the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
>
> +# dwc_otg builds in ../dwc along with host support
> +config USB_GADGET_DWC_HDRC
> +	boolean "DesignWare USB Peripheral"
> +	depends on DWC_OTG_MODE || DWC_DEVICE_ONLY
> +	select USB_GADGET_DUALSPEED
> +	select USB_GADGET_SELECTED
> +	select USB_GADGET_DWC_OTG

    I don't see where this one is defined...

WBR, Sergei